Amerock Urbanite 6-5/16 in pull is a zinc and aluminum cabinet handle designed for decorative hardware projects where a defined center-to-center matters for precise drilling and layout. The 6-5/16 in (160 mm) center-to-center dimension sets reliable hole spacing, which helps maintain consistent alignment across multiple doors and drawers. The pull combines brushed gold and matte black finishes, giving installers a clearly defined two-tone look that supports modern contrast designs on cabinetry. At an overall length of 9-1/16 in, the pull spans more of the drawer or door front, which can visually anchor wider fronts and balance tall doors. A projection of 1-3/16 in provides hand clearance from the cabinet face, which helps with comfortable grasping in everyday use. A width of 1/2 in gives a narrow front profile, which supports a streamlined appearance in tight visual layouts.
The Amerock Urbanite cabinet pull uses a 6-5/16 in (160 mm) center-to-center measurement, which provides a fixed drilling pattern for both new installs and change-outs on prepared fronts. The specified length of 9-1/16 in defines the span of the handle on the cabinet surface, which helps with planning drawer and door proportioning before drilling. With a projection of 1-3/16 in from the cabinet face, the pull allows clearance for fingers behind the bar, which matters on thicker door profiles or when used near adjacent trim. The 1/2 in width and 7/16 in by 1/2 in base dimensions define the contact footprint, which is useful when laying out pulls on narrow rails or when aligning with existing finish details. The listed screw size of 8-32 x 1 in specifies the threading and length, which supports matching to standard cabinet door and drawer front thicknesses that accept this screw format.
The Amerock Urbanite series handle sits in the decorative hardware and moldings category, positioning it for cabinet doors and drawers in woodworking projects where appearance matters alongside function. Its brushed gold and matte black finish combination supports use on contemporary cabinet runs where two-tone hardware becomes part of the design statement. The 6-5/16 in (160 mm) center-to-center dimension suits medium to larger cabinet fronts, where a longer pull can span more of the rail or stile for balanced sightlines. The overall length of 9-1/16 in helps it visually anchor wider drawers, which is useful on kitchen bases, vanities, or storage cabinetry requiring a consistent hardware size. With a projection of 1-3/16 in, the pull provides clearance that can suit both door and drawer applications, supporting a unified look when the same part is used across an entire room.
The Amerock Urbanite 6-5/16 in pull uses a clearly defined center-to-center measurement, which simplifies the use of drilling jigs and templates for repetitive installations across multiple cabinets. The zinc and aluminum material allows the pull to remain lightweight relative to its 9-1/16 in length, which can help when mounting on standard cabinet construction without overloading lighter fronts. The 1/2 in width concentrates the gripping area, which can make the pull feel more precise on smaller faces while still providing a confident handhold. Base dimensions of 7/16 in by 1/2 in define a compact mounting footprint, which is useful when aligning hardware between panel details or avoiding edges on narrow rails. The combination of brushed gold and matte black finishes on a single pull allows one part to visually tie together mixed metal elements in the same space, which can streamline hardware selection across multiple cabinet runs.
The Amerock Urbanite 6-5/16 in pull has a 6-5/16 in (160 mm) center-to-center, which sets the hole spacing for drilling and helps match layouts that follow this measurement.
The BP778160BGLMB pull has a 9-1/16 in overall length, which helps it fit medium to larger cabinet doors and drawers where a longer handle is preferred.
The Amerock Urbanite cabinet pull uses zinc and aluminum construction, which provides a metal body suited to decorative cabinet hardware applications.
This brushed gold matte black pull combines a brushed gold finish with a matte black finish, which supports two-tone cabinet hardware designs.
The Amerock Urbanite series handle projects 1-3/16 in from the cabinet face, which offers finger clearance behind the pull for regular opening and closing.
The Urbanite 6-5/16 in center pull uses 8-32 x 1 in screws, which matches common cabinet door and drawer front thicknesses using this thread size.
The Amerock Urbanite 6-5/16 in pull pairs a defined 160 mm center-to-center layout with a brushed gold and matte black finish, giving both dimensional clarity and a two-tone look. With its 9-1/16 in length, 1-3/16 in projection, and zinc/aluminum construction, it suits cabinet doors and drawers that call for consistent sizing across a run. For projects handled through Wurth Baer Supply, this BP778160BGLMB pull offers a set of measured dimensions and finishes that align with decorative hardware planning on professional and serious DIY cabinetry jobs.
Sold In: 1 Each