Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Urbanite pull 160mm defines this cabinet handle as part of Amerock Corporation's Urbanite collection, so installers get a consistent modern style across a project. The pull uses a brushed gold and black chrome finish, which delivers a two-tone appearance that suits mixed-metal kitchen or bath layouts. Its center-to-center dimension is 6-5/16 inches, giving a comfortable hand spread on wider drawers and doors that see frequent use. The overall length is 9-1/16 inches, so the pull visually anchors larger fronts without looking undersized. A projection of 1-3/16 inches creates finger clearance between the handle and the door face, which helps when users have larger hands or when doors sit near adjacent surfaces. The 1/2 inch width gives a slim, contemporary profile that reads clean on flat-panel fronts while still presenting enough surface for a solid grip during daily operation.
The 6-5/16 inch center-to-center dimension defines the exact spacing between mounting points, so drill locations can be laid out accurately on both doors and drawers. Using this fixed spacing helps keep hardware lines straight across a run of cabinetry. The pull uses 8-32 x 1 inch screws as its mounting connection, which matches a standard cabinet hardware thread for predictable engagement in door and drawer fronts of common thicknesses. With a 9-1/16 inch overall length, there is extra material beyond the screw holes, which provides visual balance on wide drawers and positions the gripping area away from the very ends. A projection of 1-3/16 inches establishes the stand-off from the surface, which affects how fingers wrap behind the pull and how far the handle extends relative to neighboring doors or appliances.
The pull sits in the Decorative Hardware & Moldings, Handles and Pulls category, which places it squarely in cabinet and furniture applications where visible hardware is part of the finished look. The zinc/aluminum construction allows the Urbanite design to carry crisp lines, so the handle reads clean on flat, slab, or simple Shaker fronts. Its 6-5/16 inch center-to-center size suits medium and larger cabinet doors or drawers, giving users more leverage when operating heavier fronts. The brushed gold and black chrome finish pairing supports use in spaces that mix dark appliances or fixtures with warmer metals, letting one pull type serve across base, wall, and tall cabinets. With a 9-1/16 inch overall length and slim 1/2 inch width, the handle scales well on wider drawers without visually overwhelming narrower doors, which is useful when standardizing one model across an entire room.
The 6-5/16 inch center-to-center spacing simplifies layout templates, because a single drill pattern can be reused across multiple cabinet fronts while keeping hardware heights and offsets consistent. This repeatability helps reduce layout time on multi-cabinet runs and supports quick replacement when matching existing holes. The 8-32 x 1 inch screw specification pairs the pull with a well-known fastener thread and length, which supports predictable grip in typical cabinet door and drawer materials without needing nonstandard threads. A projection of 1-3/16 inches creates a reliable gap behind the pull that stays the same from cabinet to cabinet, so users experience the same hand clearance on every door. The 7/16 inch by 1/2 inch base dimensions define a compact contact area at each mounting point, which keeps the hardware footprint tight for clean alignment near door edges or narrow rails while still covering standard drill holes.
The Amerock Urbanite pull 160mm belongs to the Decorative Hardware & Moldings, Handles and Pulls category, so it suits cabinet and furniture doors or drawers where exposed pulls are part of the finished design.
The 6-5/16 inch center-to-center dimension and 9-1/16 inch overall length suit medium to wider drawers, giving a long gripping span that helps operate larger or heavier drawer fronts comfortably.
The brushed gold and black chrome finish creates a two-tone look, allowing the same pull to coordinate with warm hardware and darker fixtures across a project without changing styles.
The 1-3/16 inch projection sets the distance off the cabinet face, giving consistent finger clearance behind the pull so hands can wrap the handle without rubbing the door surface.
The zinc/aluminum material provides a metal body that supports the Urbanite design contours, helping maintain clean edges and a solid feel on cabinet doors and drawers during regular use.
The BP778160BGLBCR part number identifies this exact Urbanite pull with brushed gold and black chrome finish and 160 mm center spacing, which helps match existing installations or specify the same model.
The Amerock Urbanite Series 6-5/16 inch center-to-center brushed gold and black chrome pull brings a defined two-tone finish, standard 6-5/16 inch mounting, and a 9-1/16 inch overall length that works across doors and drawers. Its zinc/aluminum construction, 1-3/16 inch projection, and compact base dimensions support consistent alignment and comfortable grip from cabinet to cabinet. For projects using Amerock decorative hardware, this BP778160BGLBCR pull offers a clear option when a slim, modern handle with coordinated finishes and repeatable mounting dimensions is required across multiple fronts.