Amerock Urbanite Series pull is a decorative cabinet handle designed for projects needing a 6-5/16 in center-to-center mount, so it matches layouts drilled to that standard spacing and keeps cabinet fronts visually consistent. The pull uses a polished chrome/white finish, which creates a two-tone look that pairs reflective metal with a light accent, helping installers coordinate with mixed-finish appliances and doors. Its zinc/aluminum material construction provides a metal body that supports normal cabinet and drawer operation in residential or light commercial settings. The overall 9-1/16 in length gives the pull a wider grip area across the face of the door or drawer, which helps users open wider fronts without feeling cramped at the hand. A projection of 1-3/16 in sets the handle off the surface enough for fingers to wrap behind it, limiting contact with the door face and reducing smudging on finished fronts.
This Amerock Urbanite Series pull uses a 6-5/16 in center-to-center mounting layout, so its two mounting points align with holes drilled to that spacing on cabinet doors and drawers. The handle is designed for use with 8-32 x 1 in screws, which matches a standard cabinet hardware thread size for mounting through typical door and drawer thicknesses. With a base size of 7/16 in length by 1/2 in width at each end, the pull covers a compact area around the mounting holes, giving a defined footprint that can sit cleanly on flat cabinet faces. The 1-3/16 in projection sets the working clearance off the face, which helps maintain a comfortable gap behind the pull while keeping the profile tight to the cabinet line.
The Amerock Urbanite Series pull fits cabinet and drawer fronts that are drilled at 6-5/16 in center to center, so it suits jobs already based on this metric spacing or new layouts using that standard. Its 9-1/16 in overall length makes it practical on medium to wider fronts, where a longer handle can span more of the panel and visually anchor the opening point. The polished chrome/white finish lets this pull work in designs that combine bright metal fixtures with white doors, drawer fronts, or trim, supporting a consistent look across base cabinets, wall cabinets, and vanities. The 1/2 in width keeps the profile slim, which is useful on narrow rails or smaller drawer faces where a bulkier pull might crowd edges or adjacent hardware. With base dimensions of 7/16 in by 1/2 in, the pull also works on flat-faced fronts where a compact footprint is preferred at each mounting point.
The 6-5/16 in (160 mm) center-to-center measurement on this Amerock Urbanite Series pull provides a repeatable reference when laying out multiple doors and drawers, helping runs of hardware stay aligned along rows and columns. Using the specified 8-32 x 1 in screw size ties directly to common cabinet construction, so installers can rely on a known thread and length for through-bore mounting on typical face thicknesses. The 1-3/16 in projection defines a consistent standoff from the cabinet face, which keeps hand clearance predictable across every opening in the job. Its zinc/aluminum material gives each pull a uniform metal construction, so the feel at the hand remains the same from one cabinet to the next. The combination of polished chrome and white finish also standardizes the appearance, supporting a cohesive visual line whether the pull is mounted on base units, tall cabinets, or drawers in the same space.
The Amerock Urbanite Series pull has a 6-5/16 in (160 mm) center-to-center size, so it matches cabinet fronts drilled for that spacing and keeps mounting alignment consistent across a run.
The pull measures 9-1/16 in in overall length, giving a longer grip area that works well on medium and wider cabinet doors or drawers where added span improves handling.
The Amerock Urbanite Series pull is made from zinc/aluminum, providing a metal body that supports everyday cabinet and drawer use in typical woodworking installations.
The pull projects 1-3/16 in from the cabinet face, which creates finger clearance behind the handle while keeping the hardware relatively low-profile on the door or drawer.
The Amerock Urbanite Series pull uses a polished chrome/white finish, giving a two-tone appearance that coordinates with bright metal fixtures and white cabinet surfaces.
The pull is specified with 8-32 x 1 in screws, matching a standard cabinet hardware thread and length for through-bore mounting on typical doors and drawers.
The Amerock Urbanite Series pull pairs a 6-5/16 in center-to-center layout with a polished chrome/white finish, so it ties functional spacing and visual style into one hardware choice. With a 9-1/16 in overall length, 1-3/16 in projection, and zinc/aluminum construction, it supports consistent hand feel and clearance from base cabinets through uppers. For projects built around 160 mm drilling patterns and a mixed metal-and-white look, this pull offers a defined option that aligns measurements, appearance, and standard 8-32 x 1 in mounting details across the job.