Amerock Urbanite pull 160mm gives a 6-5/16 inch center-to-center layout that sets consistent hole spacing across cabinet doors and drawers, which helps installers repeat measurements from cabinet to cabinet without reworking layouts. The 9-1/16 inch overall length spreads that pull point across more of the front, which can visually balance wider doors or drawer fronts on kitchens or built-ins. A 1-3/16 inch projection holds the userâ??s hand away from the surface, reducing knuckle contact on thicker fronts while opening and closing. The 1/2 inch width provides a slim grip line that suits narrow rails yet still leaves finger clearance. Base dimensions of 7/16 inch by 1/2 inch define the footprint at each mounting point, which matters when positioning the pull on narrow stiles to keep bases fully on the flat face.
The 6-5/16 inch center-to-center drilling dimension gives a fixed spacing that aligns with standard 160 mm setups, which is useful when drilling new runs of cabinets or matching to existing holes using jigs or templates. The 9-1/16 inch overall length defines how far the pull spans across a door or drawer, which influences where it lands relative to panel edges and rails during layout. With a 1-3/16 inch projection, the pull extends far enough from the face for comfortable gripping while still staying tight to modern fronts. The 7/16 inch by 1/2 inch base size at each end indicates how much flat surface is needed so the pull seats cleanly, which is important on narrow rails or profiled edges.
The Amerock Urbanite Series pull with polished chrome and black chrome finish brings a mixed-metal look to doors and drawers, which can coordinate with decorative hardware and moldings in the same space. The zinc/aluminum material construction defines the pull body, which suits decorative hardware and handles applications in cabinetry and similar millwork. Its 6-5/16 inch center-to-center measurement aligns with projects laid out to the 160 mm standard, which is common on many cabinet handle runs. The 9-1/16 inch length provides a longer bar, which can feel proportionate on full-height doors or wide drawers in kitchens, baths, or storage pieces. With a 1/2 inch width, the pull maintains a streamlined face, which works with contemporary cabinet lines where a slimmer front profile is preferred.
The specified 6-5/16 inch center-to-center spacing lets installers set up drilling jigs once and repeat the same pattern, which reduces layout time across multiple cabinets. The 1-3/16 inch projection from the surface gives a consistent stand-off, which supports clearance when doors open near adjacent panels or appliances. Base pads sized at 7/16 inch by 1/2 inch mark the bearing area under each screw location, which helps position the pull so those pads stay fully on the flat section of stile or rail. The 1/2 inch width and 9-1/16 inch length combine into a bar shape that provides ample gripping span, which can be useful when users open heavier or larger fronts. The finish pairing of polished chrome and black chrome defines the visual contrast on the pull, which can tie together other chrome-finished components on the project.
The BP77816026BCR pull has a 6-5/16 inch (160 mm) center-to-center size, which matches a common drilling pattern for cabinet handles and supports consistent hole spacing on runs.
The Amerock Urbanite cabinet pull measures 9-1/16 inches in overall length, which provides an extended grip area across doors or drawers for easier handling on wider fronts.
The pull uses zinc/aluminum construction, which defines the body of the decorative hardware and suits typical cabinet and furniture handle applications.
The Amerock Urbanite pull projects 1-3/16 inches from the mounting surface, which provides finger clearance while operating doors or drawers near adjacent surfaces.
Each base on the pull measures 7/16 inch long by 1/2 inch wide, which indicates the flat mounting area required at each screw location on a stile or rail.
The Amerock decorative handle uses 8-32 x 1 inch screws, which defines both the machine thread and nominal length for matching to cabinet front thickness.
The Amerock Urbanite Series 6-5/16 inch center-to-center pull BP77816026BCR combines a 160 mm drilling pattern, zinc/aluminum construction, and a polished chrome/black chrome finish, which suits decorative hardware upgrades or new cabinet installations needing this specific layout and look. With defined dimensions for length, projection, width, and base size, the pull gives clear reference points for planning drilling, positioning on stiles or rails, and aligning multiple handles across a project. For cabinet hardware work through Wurth Baer Supply, this model offers a documented set of measurements and finish details that support straightforward selection when a 6-5/16 inch center-to-center Amerock Urbanite pull is required.