Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Urbanite cabinet pull in brushed gold and white is a zinc and aluminum handle designed to operate cabinet or furniture doors with a modern, two-tone look that stands out clearly against wood or painted fronts in everyday use.
The 7-9/16 in (192 mm) center-to-center drilling sets the hand contact span, so this pull fits layouts built around that common hole spacing on doors or drawer fronts and keeps replacement work tied to existing boring patterns.
The overall 10-1/4 in length extends beyond the mounting span, giving more grabbing area for hands, which helps when opening wider or heavier cabinet sections in busy shop or kitchen spaces.
A 1-3/16 in projection pulls the grip away from the surface, creating working clearance for fingers behind the bar while keeping the handle close enough to the face to limit snag points along runs of doors.
The 1/2 in width and 7/16 in by 1/2 in base dimensions define the footprint where the pull meets the surface, so installers can align the hardware visually with rails and stiles for a consistent, clean run across multiple fronts.
The 7-9/16 in (192 mm) center-to-center measurement establishes where mounting holes are drilled, so this pull aligns with fronts bored to that spacing in both new cabinets and swap-out situations.
The 1-3/16 in projection sets how far the grip stands off the surface, which affects finger room behind the pull and how closely doors can pass each other in tight reveals or banked installations.
The 1/2 in width and 7/16 in by 1/2 in base dimensions define how much flat surface is needed, helping layout on narrow rails or slim drawer fronts where available mounting area is limited.
The 8-32 x 1 in screw size specification states the threaded interface at the pull, so installers can match this thread and length to their door or drawer thickness during mounting work.
The Amerock Urbanite Series 7-9/16 in center-to-center brushed gold and white pull is built as decorative hardware for cabinet and furniture fronts, so it serves on doors and drawers where both function and visual impact matter in finished spaces.
The 10-1/4 in overall length suits wider drawer fronts or taller doors, because the extended bar gives more grip area along the face, which supports comfortable operation on storage sections that see frequent opening cycles.
The brushed gold and white finish combination positions this pull for designs that call for a defined contrast band on the hardware, letting the handle stand out against darker fronts or tie in with mixed-material themes on surrounding fixtures.
The zinc and aluminum material selection makes the pull part of a metal hardware system on the cabinet, which integrates visually with other metallic components such as hinges or adjacent pulls from the same Amerock Urbanite collection.
The base dimensions of 7/16 in length by 1/2 in width keep the contact points relatively compact, so this handle fits on stile-and-rail construction where rail height is limited but still offers enough flat area to support secure mounting.
The Amerock Corporation manufacturer identity connects this piece to the broader Amerock decorative hardware family, enabling consistent styling when projects call for matching pulls of different sizes within one Urbanite line.
The precise 7-9/16 in (192 mm) center-to-center drilling dimension allows installers to repeat the same bore pattern across many doors or drawers, which maintains straight sightlines and alignment when running hardware down a bank of cabinets.
The 1-3/16 in projection is fixed for this pull, so every installed piece stands off the surface by the same amount, helping doors open without knuckle contact while preserving a uniform profile along upper and lower runs.
The 1/2 in width and 7/16 in by 1/2 in base dimensions remain constant from piece to piece, which simplifies layout on jigs and templates used for repetitive boring and fastening during shop or onsite installation work.
The 10-1/4 in overall length stays identical across all units of this model, so spacing between pulls on neighboring fronts can be planned using that dimension to create even visual rhythm in modern linear designs.
The brushed gold and white finish combination is defined for this specific pull, ensuring that every handle of this model delivers the same two-tone appearance, which matters when aligning color across an entire kitchen or casework run.
The Amerock Urbanite naming and manufacturer part number BP778192BGLWHT uniquely identify this pull, giving installers and purchasing teams a clear reference when reordering for expansions, replacements, or matching additional cabinetry.
The Amerock Urbanite BP778192BGLWHT is a decorative cabinet pull, so it functions as a handle for operating cabinet or furniture doors and drawers in finished woodworking projects.
The pull uses a 7-9/16 in (192 mm) center-to-center measurement, which sets the drilling distance between mounting holes for layout and replacement work.
The Amerock Urbanite cabinet pull has a 10-1/4 in overall length, defining the visible bar span across the door or drawer face once installed.
The pull is made from zinc and aluminum, creating a metal handle body that integrates with other metallic decorative hardware on cabinets.
The brushed gold and white pull projects 1-3/16 in from the surface, providing finger clearance behind the bar while keeping the handle close to the cabinet face.
This Amerock decorative cabinet hardware uses 8-32 x 1 in screws, defining the thread and nominal length required at each mounting point.
The Amerock Urbanite cabinet pull pairs a 7-9/16 in (192 mm) center-to-center layout with a 10-1/4 in overall length, giving a clear drilling pattern and visible span that fit modern cabinet runs using this common sizing.
The zinc and aluminum construction with a brushed gold and white finish establishes both the structural metal body and the visual style, so projects gain a consistent two-tone look aligned to the Urbanite collection.
The 1-3/16 in projection, 1/2 in width, and 7/16 in by 1/2 in base dimensions supply defined mounting geometry, supporting repeatable installation when standardizing hardware across doors, drawers, and additional casework.
Sold In: 1 Each