Amerock Urbanite pull 192mm center to center describes a handle from the Urbanite collection designed as a functional cabinet and drawer pull. The pull is identified as Amerock Corporation Manufacturer Part # BP778192BGLMB, so it can be matched precisely across drawings, takeoffs, and reorder lists. The zinc/aluminum material construction anchors the pull in common decorative hardware practice, giving installers a familiar substrate for drilling layouts and handling during installation. The Brushed Gold / Matte Black finish defines the pull as a two-tone piece, which helps align it with specific design schemes that call for contrast between hardware and cabinet surfaces. The pull has a stated role in the Decorative Hardware & Moldings, Handles and Pulls category, clarifying that it is intended for typical cabinet and furniture handle applications rather than for mechanical latching or specialty functions.
The center-to-center measurement of 7-9/16 in (192 mm) defines the exact distance between mounting holes, so drill locations can be laid out accurately on doors and drawer fronts. The specified screw size of 8-32 x 1 in gives the thread and length information that ties directly to the holes and material thicknesses commonly encountered in cabinetry. With a projection of 1-3/16 in, the pull extends a defined distance from the surface, which affects clearance relative to adjacent doors, appliances, and surrounding trim. The overall length specification of 10-1/4 in and width of 1/2 in provide the outer envelope of the pull, so installers can reference these dimensions when aligning multiple pulls in a run of cabinets or matching existing hardware locations.
The 7-9/16 in (192 mm) center-to-center dimension positions this pull in a longer size range suited to wider drawers or taller cabinet doors, where extended hardware helps distribute hand force. In cabinet runs that are being upgraded within the Decorative Hardware & Moldings, Handles and Pulls category, this center spacing allows a consistent drill pattern across multiple faces. The 10-1/4 in overall length gives each door or drawer a substantial handle span, which is useful on base cabinets or larger upper cabinets where a smaller pull might feel undersized. The Brushed Gold / Matte Black finish defines a two-tone appearance that can be used to coordinate with cabinet colors or appliance trims, letting designers align the pull with specific room palettes. Because the pull is identified as an Amerock Urbanite Series piece, it fits projects where grouping hardware within one collection is important for visual continuity.
The zinc/aluminum material provides a known substrate for handling and fastening, so installers can work with the pull using standard cabinet hardware techniques. The 1-3/16 in projection describes a fixed standoff that helps maintain uniform clearance between hardware and cabinet faces, contributing to consistent finger room along a full bank of drawers. The 1/2 in width offers a defined gripping surface, which becomes important when aligning pulls at the same height so that hand contact points line up visually and ergonomically. Base dimensions of 7/16 in long by 1/2 in wide identify the footprint at each end of the pull, giving a clear sense of how the pull will sit on rails, stiles, or flat drawer fronts. The Amerock Corporation Manufacturer Part # BP778192BGLMB connects all of these details to ordering and specification documents, helping keep field installations aligned with design intent throughout a project.
The Amerock Urbanite Series pull has a 7-9/16 in (192 mm) center-to-center dimension, which sets the exact distance between mounting holes used during cabinet and drawer front drilling.
The BP778192BGLMB pull has an overall length of 10-1/4 in, defining how much linear space it occupies on a cabinet door or drawer face during layout.
The Amerock Urbanite Series pull is made from zinc/aluminum, giving installers a familiar decorative hardware material for drilling alignment and fastening.
The pull projects 1-3/16 in from the mounting surface, which defines finger clearance and spacing relative to nearby doors, drawers, and adjacent components.
Each base measures 7/16 in long by 1/2 in wide, indicating the footprint resting on the cabinet surface and how it relates to narrow rails or profiles.
The Amerock Urbanite BP778192BGLMB pull has a Brushed Gold / Matte Black finish, giving it a defined two-tone appearance for coordinated cabinet hardware schemes.
The Amerock Urbanite Series 7-9/16 in (192 mm) center-to-center Brushed Gold / Matte Black pull offers clearly stated dimensions for layout: 10-1/4 in length, 1-3/16 in projection, 1/2 in width, and 7/16 in by 1/2 in base size. The zinc/aluminum material and Amerock Corporation Manufacturer Part # BP778192BGLMB tie the pull directly to specification sheets and project documentation. For projects calling for a two-tone Brushed Gold / Matte Black handle in the Decorative Hardware & Moldings, Handles and Pulls category, these defined measurements support consistent planning and repeatable cabinet installations.