Amerock Urbanite cabinet pull brings a 7-9/16 inch (192 mm) center-to-center mount that sets a consistent drill pattern across doors and drawers, which matters when laying out multiple fronts in a row for clean, repeatable alignment. The polished chrome/white finish defines a two-tone look on the zinc/aluminum body, so the pull reads crisp against cabinet fronts while keeping a unified style across a room. A 10-1/4 inch overall length gives this pull solid hand space across wider drawer fronts, helping users grab near the center instead of the edge. The 1/2 inch width keeps the profile slim, which helps when working around tight clearances between adjacent doors. A 1-3/16 inch projection from the mounting surface provides finger clearance behind the pull, which supports comfortable everyday use on frequently opened cabinets.
The 7-9/16 inch (192 mm) center-to-center spacing on this Amerock Urbanite pull sets the exact distance between mounting holes, which lets installers transfer that dimension directly to jigs or boring equipment for repeat drilling. The 7/16 inch by 1/2 inch base dimensions define the footprint at each mounting point, so the installer can judge how the feet sit on narrow frame rails or slab fronts. With a 10-1/4 inch overall length, the handle extends well past the hole centers, which supports consistent placement when referencing from door edges or drawer top rails. The 1-3/16 inch projection from the cabinet face keeps the handle off the surface, which leaves room for fingers during operation while keeping the pull close enough to minimize snagging on nearby traffic paths.
This Amerock Urbanite Series pull, part number BP77819226WHT, is defined as a handle in the decorative hardware and moldings category, which fits typical cabinet and drawer front applications where a pull-type handle is required. The 7-9/16 inch (192 mm) center-to-center measurement aligns with a common metric drill pattern, which suits new cabinet builds laid out on 32 mm systems or retrofits where that spacing is already present. With a 10-1/4 inch length on a 1/2 inch wide bar, the pull visually spans more of the front, which works well on wider kitchen drawers, pantry doors, or long closet fronts where a small knob would look undersized. The polished chrome/white finish introduces a contrast band across the pull, which can be used to tie together white cabinetry and chrome fixtures in the same room for a coordinated appearance.
The 192 mm center-to-center spacing gives a fixed dimension for both new drilling and template use, which helps installers repeat the same handle location across an entire run without remeasuring every front. Base dimensions of 7/16 inch length by 1/2 inch width describe the contact area at each mounting point, which helps evaluate how the pull seats on narrow stiles or slab edges with minimal overhang. A projection of 1-3/16 inch from the mounting surface defines the standoff, which provides enough clearance for fingers behind the pull while keeping the handle closer to the cabinet face for a tighter profile. The zinc/aluminum construction sets the metal composition, which allows this pull to be grouped with other zinc or aluminum-based Amerock decorative hardware from the Urbanite collection for consistent material across a project.
The Amerock Urbanite cabinet pull has 7-9/16 inch (192 mm) center-to-center spacing, which defines the drilling distance for setting up jigs or marking cabinet fronts.
The Amerock Urbanite BP77819226WHT pull measures 10-1/4 inch in overall length, which gives broad hand contact on wider cabinet doors and drawer fronts.
This polished chrome/white pull projects 1-3/16 inch from the mounting surface, which provides finger clearance behind the handle during everyday use.
The Urbanite Series pull is made from zinc/aluminum material, which aligns it with other metal decorative hardware pieces in the Amerock line.
Each base on this pull measures 7/16 inch long by 1/2 inch wide, which indicates how much surface contact the feet have on the cabinet face.
The Amerock Urbanite BP77819226WHT uses a polished chrome/white finish, which pairs chrome shine with a white accent band along the pull.
The Amerock Urbanite cabinet pull with 7-9/16 inch (192 mm) center-to-center spacing, 10-1/4 inch overall length, and 1-3/16 inch projection gives clear mounting data for planned layouts on cabinets and drawers. The zinc/aluminum construction and polished chrome/white finish define both the material and the visual character, which helps match this pull with other Amerock decorative hardware from the Urbanite collection. For projects designed around a 192 mm drill pattern where a slim 1/2 inch wide, longer pull suits the front proportions, this model BP77819226WHT provides the specific dimensions needed for repeatable installation.