Amerock Urbanite pull 192mm center to center describes a modern cabinet pull from the Urbanite Collection designed for cabinet and furniture applications where a 7-9/16 in center-to-center layout is already established or being laid out on new work.
The pull is identified by Amerock part number BP77819226G10, which ties this piece directly to the Urbanite Series for consistent selection across a project when matching existing hardware or planning a coordinated run of cabinets.
Its polished chrome and satin nickel finish combination provides a mixed-metal look on one pull, allowing installers to match it with surrounding decorative hardware using either tone while maintaining one continuous handle style across doors and drawers.
The pull uses a zinc/aluminum material construction, giving a metal feel in the hand that suits residential or light commercial cabinet doors and drawers where a decorative handle also needs to stand up to frequent daily operation.
The 1-3/16 in projection sets the handle off the cabinet face enough to grip comfortably, which helps on larger doors or when working with thicker door profiles that benefit from additional finger clearance behind the pull.
This Amerock Urbanite pull is specified with a 7-9/16 in (192 mm) center-to-center mounting dimension, guiding drilling layout for new cabinet fronts and matching existing holes on cabinetry already set up to this spread.
The pull uses 8-32 x 1 in screws as its mounting connection, tying directly into standard cabinet door and drawer front construction where 8-32 machine threads are commonly used through-bored hardware holes.
The 1-3/16 in projection dimension sets the distance from the cabinet face to the outermost point of the handle, which helps installers visualize how far the pull will stand off the surface when planning around adjacent doors or nearby walls.
The base footprint at 7/16 in length by 1/2 in width at each post helps align the pull on narrow stiles, and those measurements allow fabricators or installers to plan accurate drilling relative to panel edges or decorative profiles.
The Amerock Urbanite Series classification places this pull within Amerock's decorative hardware line, aligning it with cabinet and furniture applications where a contemporary style and consistent finish combination are important throughout a room.
The 7-9/16 in (192 mm) center-to-center size suits wider drawer fronts or taller doors, so it works well on base cabinets, large pantry doors, or long drawers that benefit from a longer grip point for easier opening.
The 10-1/4 in overall length visually fills more of the drawer or door face, which can help balance proportions on frameless cabinetry or full-overlay fronts where larger hardware better matches the scale of the panel.
The dual polished chrome and satin nickel finish lets the same pull bridge different metal tones within a space, supporting layouts that transition between shiny and softer metallic elements without changing handle style from cabinet to cabinet.
The zinc/aluminum material supports consistent shaping of the handle, so each pull in a project maintains the same lines and feel, which matters on multi-opening installations like kitchens, baths, and built-in storage runs.
The 1/2 in width provides a slim, linear appearance that aligns well with modern door profiles and flat-panel fronts, giving a streamlined handle that does not overpower narrow drawer fronts or slim rail sections.
The specified 7-9/16 in drilling spread gives installers a fixed reference point for jigs or drilling templates, which supports repeatable hole placement across multiple doors and drawers in a production or field setting.
The 8-32 x 1 in screw size aligns with common cabinet construction practices, so fabricators can use standard through-boring operations and expect the hardware threads to engage appropriately through typical door and drawer thicknesses.
The 1-3/16 in projection figure is critical when verifying clearance from adjacent cabinet doors or walls, allowing planners to map swing paths and handle stand-off in relation to nearby obstacles using that defined distance.
The 7/16 in by 1/2 in base dimensions inform how close the mounting posts can sit to door edges or decorative details while still fully bearing on the flat portion of the stile or rail, helping reduce layout trial and error.
The overall 10-1/4 in length ties into layout symmetry when aligning multiple pulls along a bank of drawers, since installers can use the known length to keep end clearances consistent from cabinet edges or between adjacent handles.
The Amerock BP77819226G10 part number gives a precise reference when re-ordering or expanding a project later, supporting repeat use of the same pull style, finish combination, and dimensions across future cabinet additions.
The Amerock Urbanite BP77819226G10 pull has a 7-9/16 in (192 mm) center-to-center dimension, which sets the hole spacing for mounting on cabinet doors or drawer fronts.
The BP77819226G10 pull measures 10-1/4 in in overall length, so it visually spans more of the door or drawer front, helpful on wider or taller cabinet faces.
The Amerock Urbanite pull is constructed from zinc/aluminum, giving a metal handle suitable for decorative cabinet and furniture use where a solid-feeling pull is desired.
This pull combines polished chrome and satin nickel finishes on one handle, allowing it to coordinate with other hardware and fixtures in either of those metallic tones.
The Urbanite pull has a 1-3/16 in projection, setting how far it stands off the cabinet face and affecting finger clearance behind the handle during use.
The BP77819226G10 pull is specified with 8-32 x 1 in screws, matching common cabinet hardware threading for mounting through standard door and drawer thicknesses.
This Amerock Urbanite cabinet pull pairs a 7-9/16 in (192 mm) center-to-center layout with a 10-1/4 in overall length, giving a long, linear handle suited to wide drawers and tall doors where a larger pull is appropriate.
The zinc/aluminum construction with polished chrome and satin nickel finishes supports use across coordinated cabinet runs, while defined projection, base dimensions, and 8-32 x 1 in screw specification help installers plan accurate, repeatable hardware layouts.