Amerock Urbanite Series pull is a zinc and aluminum cabinet handle in a brushed gold and white finish, so it delivers a mixed-metal look that suits decorative hardware projects. The 10-1/16 in center-to-center dimension aligns with common drilling patterns, which helps when matching or upgrading existing cabinet layouts. Its total 12-3/4 in length gives a substantial hand grip, useful on wider doors and drawers where users expect a confident pull point. A 1-3/16 in projection sets the handle off the surface at a practical distance, giving fingers room to grab while keeping the profile tight to the face. The 1/2 in width keeps the pull visually slender, which fits modern cabinet lines. Base dimensions of 7/16 in long by 1/2 in wide define the footprint at each mounting point, which matters when covering old marks or planning precise drilling on new fronts.
The 10-1/16 in center-to-center dimension defines where the two mounting points land, which simplifies layout when drilling new fronts or aligning to pre-bored holes. With a 12-3/4 in overall length, the pull extends slightly beyond these points, so installers can anticipate edge clearances on narrow rails or stile faces. The 1-3/16 in projection locates the gripping surface off the door or drawer, which helps plan for adjacent fronts so hardware does not touch when doors are opened. A 1/2 in width keeps the pull slim across the face, supporting use on narrow drawer rails without crowding. Base dimensions of 7/16 in long by 1/2 in wide define the contact area at each end, useful when checking whether the pull will visually cover previous pull outlines on a refacing job.
This Amerock Urbanite Series 10-1/16 in center-to-center pull is suited to cabinet applications that use a two-hole mount with that spacing, because the dimension directly matches the hardware pattern. The 12-3/4 in overall length suits base and wall cabinet doors where a longer handle complements vertical lines. On wide drawers, the extended length distributes the hand grip across more of the front, which can feel balanced when opening heavier loads. The brushed gold and white finish supports use on cabinets where a contrast between hardware and face material is part of the design, giving a defined handle outline.
The zinc and aluminum material basis keeps the pull in the metal hardware category, which aligns with typical decorative handle expectations in kitchen and bath environments. A 1/2 in width makes the pull visually lean, which works on contemporary slab fronts or narrow shaker rails. The base dimensions of 7/16 in long by 1/2 in wide control how much of the mounting area shows at each end, which can be important when placing multiple pulls on large pantry doors or tall wardrobe faces.
The 10-1/16 in center-to-center measurement provides a repeatable number for jigs, which supports consistent alignment of multiple pulls across cabinet runs. With 12-3/4 in total length, installers can reference both the mounting dimension and the finished span when laying out symmetry on double doors. The 1-3/16 in projection defines the stand-off, so rows of doors and drawers can share a common hardware depth, which helps avoid interference between adjacent pulls.
The 1/2 in width keeps each pull within a narrow band, aiding visual alignment along edges and between stacked drawers. Base dimensions of 7/16 in long by 1/2 in wide set a predictable footprint at each screw location, which can cover minor surface variations around the holes. The brushed gold and white finish provides a specific color reference, useful when matching this Amerock decorative cabinet pull to other pieces from the same space for a coordinated layout.
The Amerock Urbanite Series pull has a 10-1/16 in center-to-center measurement, which sets the hole spacing for mounting and matches layouts drilled to that pattern.
The pull measures 12-3/4 in overall length, so the handle extends beyond the mounting points, giving a longer grip area across cabinet doors and drawers.
The Amerock Urbanite Series pull is made from zinc and aluminum, providing a metal construction suited to decorative cabinet hardware applications.
The BP778256BGLWHT pull uses a brushed gold and white finish, giving a defined two-tone appearance that can coordinate with cabinet and fixture colors.
This Amerock decorative cabinet pull has a 1-3/16 in projection, setting the distance off the door or drawer front for hand clearance.
Each base on the Amerock Urbanite Series pull measures 7/16 in long by 1/2 in wide, defining the footprint where it contacts the cabinet surface.
The Amerock Urbanite Series pull with 10-1/16 in center-to-center spacing, 12-3/4 in overall length, and 1-3/16 in projection offers defined dimensions for cabinet layouts. The zinc and aluminum construction with a brushed gold and white finish provides a specific metal look. Using the part number BP778256BGLWHT when planning orders keeps this exact size and finish consistent across your cabinet installation.