Amerock Urbanite Series 10-1/16 in (256 mm) Center to Center Matte Black/Matte Black Pull, -BP778256MBMB

Amerock Urbanite Pull 256mm For Cabinets

Amerock Urbanite pull 256mm identifies this pull as part of Amerock Corporations Urbanite collection, which gives installers a consistent style when matching other Urbanite handles across a project. The pull is described as a handle in the decorative hardware category, so it functions as a cabinet or drawer pull where a clean, linear grip is needed. The web description lists the material as zinc/aluminum, which provides a metal body suited to everyday cabinet use. The finish is specified as matte black / matte black, so both the bar and posts present the same dark tone that supports a uniform look on doors and drawers. The center-to-center dimension is given as 10-1/16 in, which sets the drilling distance between mounting holes for accurate layout on wide fronts. The manufacturer part BP778256MBMB ties ordering to this specific size, finish, and style for repeat jobs.

Key Pull Details That Support Cabinet Work

• The web description lists a center-to-center of 10-1/16 in, which lets installers position mounting holes accurately on large doors or drawers, reducing layout time when repeating the same pattern across a bank of cabinets.
• The material is noted as zinc/aluminum, which creates a rigid metal pull body that handles routine opening and closing on frequently used cabinet fronts without feeling flimsy during use.
• The finish is specified as matte black / matte black, so the pull presents a uniform dark appearance that helps visually tie together hinges, knobs, and other black decorative hardware on the same installation.
• The projection is listed as 1-3/16 in, giving fingers room behind the bar for a comfortable grip while still keeping the handle close to the cabinet face for a controlled profile on doors and drawers.
• The length or diameter is stated as 12-3/4 in, so the overall bar spans wider than the 10-1/16 in mounting points, helping the pull visually fit broader drawer fronts or pantry doors.
• The base dimensions are specified as 7/16 in long by 1/2 in wide, which defines the footprint at each post where it meets the door or drawer surface for predictable contact and coverage.

Installation Layout And Mounting Dimensions

The center-to-center measurement of 10-1/16 in directly governs drilling layout, so installers can mark and bore two holes at that spacing to align the pull correctly along a drawer or door rail. The length of 12-3/4 in means the bar extends past the mounting points, allowing it to cover more of the front and line up with other long pulls in the same run. The projection of 1-3/16 in sets how far the pull stands off the face, helping plan for clearance from moldings or adjacent doors. The base dimensions of 7/16 in by 1/2 in define the contact area at each end, important when laying out tight reveals or when working near panel edges. The screw size is listed as 8-32 x 1 in, so the pull is threaded to work with that machine screw standard during mounting.

Using This Amerock Urbanite Pull In Projects

Where The 10-1/16 In Urbanite Pull Fits

The product is identified as part of the Amerock Urbanite collection, placing it in a decorative hardware family suited to cabinet and drawer fronts. The 10-1/16 in center-to-center dimension aligns well with wider drawers or tall cabinet doors, where a longer grip point improves leverage when opening. The overall 12-3/4 in length allows this pull to act as a visual anchor on pantry doors or base cabinets, tying together multiple fronts in a straight run. The matte black / matte black finish supports use on face frames or frameless cabinets where a consistent dark hardware line is desired. Being a handle in the handles and pulls class positions it specifically for applications where a full hand grip is preferred, such as kitchen, bath, or storage cabinetry. The zinc/aluminum material under the finish keeps the pull suitable for general indoor woodworking environments.

Dimensions That Help Repeatable Cabinet Results

The documented center-to-center of 10-1/16 in gives a fixed drilling template, so shops can set jigs or boring machines to that spacing and repeat it reliably across multiple fronts. The stated projection of 1-3/16 in defines working clearance behind the bar, helping installers align the pull so fingers clear raised panels or edge profiles. The length of 12-3/4 in offers a known span for aligning hardware symmetrically on wide drawers, which supports consistent sightlines from cabinet to cabinet. The base size of 7/16 in by 1/2 in provides a predictable pad for covering minor imperfections at the bore point, aiding in clean-looking installations. The specified 8-32 x 1 in screw size ties directly to common cabinet hardware drilling practice, so fabricators can coordinate hole sizing with other pulls using the same threading.

Common Questions About This Urbanite Cabinet Pull

Selecting This Pull For Cabinet Installations

The Amerock Urbanite pull 256mm pairs a 10-1/16 in center-to-center with a 12-3/4 in overall length, giving installers a defined layout for wide drawers and doors. Its zinc/aluminum construction and matte black / matte black finish support consistent decorative hardware runs across cabinetry. With a 1-3/16 in projection and documented base dimensions, the pull offers predictable clearances and contact areas during mounting. At Wurth Baer Supply, this specific BP778256MBMB part number allows shops and installers to reorder the same size and finish whenever projects call for this Urbanite handle.