Amerock Transcendent Series 5/8 in (16 mm) Center to Center Silver Champagne Pull, -BP741416SCSC

Amerock Transcendent Pull 16 Mm Center Details

The Amerock Transcendent pull 16 mm center to center is an aluminum cabinet handle designed for tight drawer and door layouts where a small center spacing solves fit problems. Its 5/8 in (16 mm) center-to-center mounting dimension lets you work with compact fronts or narrow rail sections without moving to a knob. The overall length of 3-3/16 in provides enough grip area for fingers while still fitting on small faces, which helps on narrow utility cabinets or short drawer fronts. A projection of 1-3/16 in sets the handle out from the surface so hands clear the door edge, supporting comfortable use on day-to-day openings. The 3/8 in width keeps the profile slim, which is practical where fronts sit close together. A base size of 1 in long by 1 in wide gives each end a defined footprint, which helps visually align the pull on the face and match other square-based hardware.

Key Amerock Transcendent Pull Job Advantages

• The 5/8 in (16 mm) center-to-center dimension concentrates mounting holes in a short run, useful for small doors or narrow drawer rails where standard hole spreads do not fit.
• The 3-3/16 in overall length provides a compact handle that still presents a usable grip, helping on tight cabinet faces while giving fingers enough surface to pull comfortably.
• The 1-3/16 in projection offsets the pull from the cabinet surface, creating space for fingers between the handle and face so doors and drawers operate without knuckle contact.
• The 3/8 in width keeps the pull visually light and low profile, which works well on modern or slim-front cabinets where a heavy bar could crowd the face.
• The 1 in by 1 in base dimensions at each mounting point define a square footprint, helping installers line up the pull consistently with cabinet edges and adjacent hardware.
• The aluminum construction keeps the pull lightweight, which can ease handling during layout and helps keep smaller fronts from feeling overbuilt.
• The silver champagne finish provides a muted metallic tone that ties in with many contemporary hinge and appliance colors on jobs using similar finishes.

Installation Geometry And Mounting Layout Details

The Amerock Transcendent Series 5/8 in (16 mm) center to center silver champagne pull uses its 5/8 in center spacing to concentrate drilling close together, which matters on narrow rails where longer spreads are not possible. The 1 in by 1 in base dimensions at each end give a clear square pad to reference against door or drawer edges during layout, supporting consistent positioning across a run of fronts. With an overall length of 3-3/16 in, the pull balances between short and mid-size hardware, so hole placement stays within the panel face without crowding the stile or adjacent hardware. A projection of 1-3/16 in sets the working distance off the surface, which helps maintain finger clearance even when fronts are recessed or framed. The 3/8 in width keeps the drill line close to the visual center of the pull bar, which can simplify aligning jigs or templates for repetitive installations.

Using This Amerock Pull On Cabinet Projects

Where The Silver Champagne Pull Works Best

The Amerock Transcendent silver champagne pull fits cabinet and furniture fronts needing a 5/8 in (16 mm) center-to-center aluminum pull, so it suits projects built around that short spacing. The 3-3/16 in overall length matches well with smaller cabinet doors, vanity fronts, and utility cabinets where long handles would look oversized. Its 1-3/16 in projection creates a usable gap between hand and face material, which helps on full-overlay doors or drawer fronts that sit close together in banks. The 3/8 in width supports a slim, linear look, making this pull useful on modern slab doors or flat-panel fronts that benefit from clean lines. A silver champagne finish coordinates with other silver-toned decorative hardware, helping installers keep a consistent appearance across hinges, pulls, and adjacent metal components on the same job.

Details That Support Repeatable Installation Results

The Amerock Transcendent pull uses its 5/8 in (16 mm) center-to-center measurement as the primary layout reference, so installers can quickly transfer that dimension to drilling jigs or templates for batch runs. The square 1 in by 1 in base at each mounting point gives a visible boundary to align with rail or stile edges, improving repeatability when setting heights on multiple doors. With a 3-3/16 in length, the hardware keeps its ends close to the hole group, which simplifies verifying that the pull sits centered on narrow fronts during install. The 1-3/16 in projection defines the standoff that users will feel every time they grab the handle, so matching this projection across a room helps maintain a uniform pull feel from cabinet to cabinet. The 3/8 in bar width, combined with the aluminum material, yields a pull that feels slim yet solid in hand, providing predictable grip feedback during everyday operation.

Common Questions About This Amerock Transcendent Pull

Select This Pull For Verified 16 Mm Center Spacing

The Amerock Transcendent pull 16 mm center to center offers a defined 5/8 in spacing, 3-3/16 in length, and 1-3/16 in projection in a silver champagne aluminum design. These dimensions support consistent drilling, comfortable hand clearance, and a compact profile for smaller doors and drawers. With 1 in by 1 in bases and a 3/8 in width, the pull helps maintain a clean layout line across fronts. For projects built around a 16 mm center-to-center cabinet pull, this Amerock option aligns the hardware geometry with the job requirements.