Amerock Transcendent Series 5/8 in (16 mm) Center to Center Matte Black Pull, -BP741416MBMB

Amerock Transcendent Matte Black Pull For Cabinets

Amerock Transcendent matte black pull is a 5/8 in (16 mm) center-to-center handle that gives small doors or drawers a defined grip point, which helps position hardware consistently across a run of cabinets. The pull is part of the Amerock Transcendent Collection, so it follows a coordinated design language that keeps projects visually aligned when using other pieces from the same series. The material is aluminum, which keeps weight down on lighter doors while still providing a firm handhold during regular cabinet use. Its matte black finish provides a non-reflective surface that visually grounds light or dark fronts and can help tie together hinges and other black components. With a length or diameter of 3-3/16 in, the pull spans enough width for finger clearance while staying compact for narrow drawer faces or tight layouts.

Key Transcendent Pull Details That Support Use

• The 5/8 in (16 mm) center-to-center dimension sets precise hole spacing, which simplifies drilling layouts and keeps alignment uniform between doors and drawers.
• The 3-3/16 in length or diameter provides a defined gripping area, which helps users confidently open smaller doors or tray fronts without needing extra clearance.
• The 1-3/16 in projection holds the pull off the face at a consistent distance, which allows fingers to wrap behind the handle while keeping the profile tight to the cabinet line.
• The 3/8 in width keeps the pull visually slim, which suits modern or minimal fronts while still giving a clear edge for fingers to catch when opening.
• The 1 in by 1 in base dimensions give a square footprint at each mounting point, which helps distribute contact on the cabinet surface and supports a clean, defined look.
• The specified screw size of 8-32 x 1 in matches a common cabinet drilling standard, which fits typical door and drawer thicknesses in many shop-built projects.

Mounting This 16 Mm Center To Center Pull

This Transcendent pull uses a 5/8 in (16 mm) center-to-center measurement, so the two mounting points are set closely together for compact fronts. That spacing lets installers place the pull on small doors where larger handles might crowd panel edges. The 1-3/16 in projection sets how far the pull stands off the surface, giving consistent finger room once the handle is mounted. With base dimensions of 1 in long by 1 in wide at each contact point, the pull sits with a defined square footprint against the cabinet face, which supports clean alignment to rail or stile edges.

How This Amerock Pull Works In Real Projects

Where The Amerock Transcendent Pull Fits Best

This Amerock Transcendent Series pull is designed as a handle for cabinet doors or drawers in decorative hardware applications. Its 5/8 in (16 mm) center-to-center layout suits narrow fronts, such as small bath cabinets, utility doors, or compact drawers, where space between stile edges is limited. The 3-3/16 in length or diameter keeps the overall footprint modest, allowing multiple pulls to be placed in close proximity on stacked drawer banks without visually crowding the faces. With base dimensions of 1 in by 1 in at each mounting point, the pull presents a simple square contact area that lines up well with flat, framed, or slab-style faces. The matte black finish integrates with other black decorative hardware, which helps shops keep a consistent look when specifying multiple Amerock pieces across a job.

Details That Support Repeatable Alignment And Workflow

The defined 5/8 in (16 mm) center-to-center dimension gives installers a fixed measurement for jigs or drilling templates, which streamlines layout when repeating the pull across a kitchen or bank of casework. A projection of 1-3/16 in sets a predictable stand-off, which helps designers visualize clearances to adjacent doors and nearby hardware during planning. The 3/8 in width and 3-3/16 in overall length or diameter create a slim, linear grip, which is useful for clean sightlines on modern fronts while still offering distinct edges for hand contact. The 1 in by 1 in base at each side defines where the pull meets the surface, which can guide installers when referencing to rails, stiles, or panel reveals. The specified 8-32 x 1 in screw size matches a common cabinet fastener length, which supports straightforward hole tapping in typical door and drawer thickness ranges on many shop-built projects.

Common Questions About This Amerock Transcendent Pull

Select This 16 Mm Pull For Precise Cabinet Layouts

The Amerock Transcendent 5/8 in (16 mm) center-to-center pull combines aluminum construction, matte black finish, and compact 3-3/16 in length to support neat, repeatable hardware layouts. With defined projection, width, and 1 in by 1 in bases, it offers predictable dimensions that suit shop jigs and on-site installs for decorative cabinet work.