Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Transcendent pull 16mm center to center defines this piece as a small-format cabinet pull designed around a 5/8 inch center-to-center mounting, so it suits tight drawer faces or compact doors where standard pulls feel oversized. The polished nickel finish gives the aluminum pull a bright, reflective surface, which helps match polished nickel decorative hardware runs across a job. Its aluminum construction keeps the pull lightweight, which supports use on smaller cabinet fronts where heavy hardware is not desired. The pull length of 3-3/16 inches provides a modest gripping area across the front, so fingers can comfortably pinch or hook the handle. A projection of 1-3/16 inches stands the pull off the surface far enough for a hand to get behind it, which helps when opening thicker doors or loaded drawers. The 3/8 inch width presents a slim front profile, which suits modern, clean-lined installations.
The 5/8 inch center-to-center drilling dimension on this Amerock Transcendent polished nickel pull sets the exact spacing for two mounting points, which simplifies layout when drilling repetitive fronts. The projection of 1-3/16 inches fixes how far the handle stands off the face, which defines both knuckle clearance and how far the hardware extends into walk paths. With a length of 3-3/16 inches, the pull covers a controlled span on the panel, which matters when positioning it away from panel edges. The 3/8 inch width determines the narrow front appearance, which can influence how closely pulls can be placed on small drawer stacks. Base dimensions of 1 inch long by 1 inch wide describe the footprint where each end of the pull meets the surface, so they indicate how much flat area is needed for stable seating.
This BP741416PNPN Amerock Transcendent pull, with a 3-3/16 inch length, naturally fits small cabinet doors and drawers where larger handles would crowd stile and rail details. The 5/8 inch center-to-center mounting size pairs well with narrow rails, because it keeps holes closer together and away from panel edges. A projection of 1-3/16 inches provides space behind the pull for fingers while still keeping the hardware relatively close to the cabinet face, which is helpful on tight galley runs or compact vanities. The polished nickel finish adds a reflective surface that visually ties into other polished nickel elements, which is useful on coordinated jobs with matching hinges, knobs, or plumbing trim. Its 3/8 inch width keeps the pull from dominating small faces, which suits contemporary or transitional designs where hardware should stay visually light.
The 5/8 inch center-to-center dimension on this Amerock 16mm cabinet pull polished nickel provides a fixed drilling pattern, which supports the use of jigs or templates for repeatable installations across multiple fronts. Base dimensions of 1 inch by 1 inch at each end define a predictable contact patch, which helps align the pull square to door edges and rails. The 1-3/16 inch projection remains constant from piece to piece, which maintains uniform hand clearance and a consistent look when lining up several pulls on a tall bank. A 3-3/16 inch overall length makes it easier to keep spacing consistent between pulls on stacked drawers, because the handles occupy a known span on the face. The specified material as aluminum keeps each pull similar in weight, which helps doors and drawers feel uniform when operated. The combination of polished nickel finish and these defined dimensions gives installers a repeatable visual rhythm across cabinetry runs.
The Amerock Transcendent pull uses a 5/8 inch center-to-center spacing, which sets a tight mounting pattern for smaller doors and drawers.
The pull length is 3-3/16 inches, which keeps it well sized for compact fronts and helps avoid overhanging narrow drawer or door edges.
The Amerock Transcendent pull has a 1-3/16 inch projection, which offers finger clearance behind the handle while staying close to the cabinet face.
The BP741416PNPN Amerock Transcendent pull is made of aluminum, which keeps the hardware relatively light on smaller cabinet doors and drawers.
Each base on this pull measures 1 inch long by 1 inch wide, which shows the flat area needed for stable seating at each mounting point.
This Amerock Transcendent pull has a polished nickel finish, which matches other polished nickel decorative hardware pieces on a project.
This Transcendent aluminum pull 5/8 inch ctc pairs a compact 5/8 inch center-to-center pattern with a 3-3/16 inch length, which suits smaller cabinet fronts needing precise hole spacing. The 1-3/16 inch projection and 3/8 inch width create a slim, usable grip without overwhelming tight layouts. With polished nickel finish over aluminum, the pull aligns with polished nickel hardware schemes while staying light on doors and drawers. The defined base dimensions of 1 inch by 1 inch at each end support consistent alignment across multiple installations. For projects built around 16 mm, or 5/8 inch, center spacing, this Amerock Transcendent polished nickel pull offers clearly specified dimensions that support repeatable, clean results.
