Amerock Transcendent Series 5/8 in (16 mm) Center to Center Matte Black/Polished Nickel Pull, -BP741416MBPN

Amerock Transcendent Pull For Compact Cabinet Spacing

Amerock Transcendent pull 16mm center to center defines this pull as a compact option, so it fits tight layouts where mounting holes sit just 5/8 inch apart on small cabinet or furniture fronts. The aluminum construction keeps the pull light, which helps when working on delicate doors or drawer fronts that do not need extra weight stressing hinges or slides. A 3-3/16 inch overall length provides enough finger contact for a comfortable grasp, helping hands clear the edge of narrow faces during daily use. The 1-3/16 inch projection sets the pull out from the surface, creating working space for fingers while keeping the profile close enough for clean lines across a run of doors. A 3/8 inch width presents a slim look that pairs well with the compact center-to-center dimension, so the pull visually suits smaller fronts without overwhelming them.

Key Amerock Transcendent Pull Details In Practice

• The 5/8 inch (16 mm) center-to-center dimension aligns with close-spaced mounting holes, which matters when matching existing drill patterns on small doors or drawers.
• The 3-3/16 inch length gives more grip area than the mounting spread suggests, helping users pull confidently on doors while still fitting tight cabinet sections.
• The 1-3/16 inch projection keeps the pull comfortably off the surface, providing finger clearance that reduces knuckle contact on door faces during repeated openings.
• The 3/8 inch width creates a narrow face, which supports a streamlined appearance on slim rails and stiles where wider hardware could crowd the wood.
• The 1 inch by 1 inch base dimensions define the footprint at each mounting point, which helps with layout on narrow framing members and with covering small old marks.
• The matte black and polished nickel finish combination delivers a two-tone look, which coordinates with both dark surfaces and brighter metal hinges or fixtures on the same project.

Amerock Pull Sizing And Mounting Fit Details

The 5/8 inch center-to-center measurement sets the hole spacing for this Amerock Transcendent pull, so it matches layouts where fasteners sit 16 mm apart on compact cabinetry or furniture pieces. The base at each end measures 1 inch long by 1 inch wide, giving a defined seating area on the surface that helps position the pull consistently along rails or drawer fronts. With a 3-3/16 inch overall length, the handle extends past the bases to offer a usable gripping span that still stays proportionate on smaller doors. The 1-3/16 inch projection holds the hand away from the face enough to operate the door without scraping against the surface, which is especially useful on thicker fronts. A width of 3/8 inch keeps the profile slim, supporting tight spacing between adjacent pulls in multi-drawer banks.

Using This Transcendent Pull On Cabinets And Furniture

Where This 16 mm Center Pull Works Best

The 5/8 inch (16 mm) center-to-center layout suits compact door and drawer fronts where the mounting points are close together, which often occurs on small cabinets, vanity drawers, and furniture doors. The 1 inch by 1 inch base pads at each mounting point supply a defined contact area, so the pull seats neatly on narrow rails or stiles without crowding the surrounding wood. The 3-3/16 inch overall length matches the scale of smaller fronts while still spanning enough of the edge to feel substantial during opening and closing. With a 1-3/16 inch projection, the pull stands off the surface at a depth that pairs well with typical cabinet and furniture door thicknesses, balancing hand clearance with a compact appearance across a run.

Details That Support Consistent Alignment And Use

The defined 5/8 inch center-to-center spacing allows repeated drilling patterns, which supports consistent alignment across banks of doors or drawers using this Amerock Transcendent design. A slim 3/8 inch width helps adjacent pulls line up cleanly in tight drawer stacks, reducing visual crowding when hardware is installed on closely spaced fronts. The 3-3/16 inch length keeps each pull visually centered over the 1 inch square bases, helping installers register straight lines by reading the edges against cabinet faces. The 1-3/16 inch projection establishes a predictable stand-off distance from the surface, which creates uniform shadow lines along doors and drawers when multiple pulls run across a wall. The aluminum material keeps each piece lightweight, which is helpful when working on smaller fronts where added mass at the edge could affect the feel of opening and closing.

Common Questions About The Amerock BP741416MBPN Pull

Selecting This Pull For Precise 16 mm Layouts

The Amerock Transcendent BP741416MBPN pull brings a 5/8 inch (16 mm) center-to-center pattern, a 3-3/16 inch overall length, and a 1-3/16 inch projection together in one aluminum handle, with a matte black and polished nickel finish. Those dimensions support compact cabinet and furniture layouts where close-spaced mounting holes, smaller fronts, and consistent hand clearance are priorities. For projects built around 16 mm spacing that call for a slim 3/8 inch wide pull with 1 inch square bases, this model offers a focused fit that aligns with detailed layout work.