Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Transcendent matte gold pull is a 3-3/4 inch (96 mm) center-to-center cabinet pull that provides a consistent hole spread for new or replacement doors and drawers, helping installers line up multiple fronts across a run of cabinets. The pull uses a 96 mm center-to-center dimension, so each handle mounts with a predictable layout when drilling or aligning to existing bores. The pull is made from aluminum, which keeps the hardware light while still giving a solid hand feel during everyday use on frequently opened fronts. Its matte gold finish gives a muted, non-gloss appearance that pairs with modern and transitional cabinet styles without strong reflection under task lighting. The pull measures 6-15/16 inches in overall length, offering a longer grip area that works well across both narrow drawer fronts and wider doors. A projection of 1-3/16 inches creates finger clearance between the pull and the cabinet face so users can comfortably grasp the handle without contacting the door surface.
The Amerock Transcendent cabinet pull uses a 3-3/4 inch (96 mm) center-to-center mounting span, so drilling or existing holes must be set to that distance for the pull to sit square and parallel to the cabinet edge. The pull is designed for use with 8-32 x 1 inch screws, which thread into the pull body from the rear of the door or drawer front to clamp the hardware firmly against the surface. With a base dimension of 1 inch long by 1 inch wide at each mounting point, the pull spreads contact over a small but defined footprint, helping cover typical drill holes while keeping the support area compact on narrow rails. The 1-3/16 inch projection works with this footprint to position the gripping bar out from the face while maintaining a low-profile mount that sits close to the cabinet surface.
The Amerock Transcendent series 3-3/4 inch (96 mm) center-to-center pull fits cabinet doors and drawers that are laid out for 96 mm drilling, so it works well in projects where that spacing is already part of the design. Its overall length of 6-15/16 inches lets the pull cover more of a drawer front, which helps visually anchor wider drawers and provides more room for users to grab near either end. On narrower doors, the 3/8 inch width keeps the hardware from overwhelming slim stiles, maintaining a balanced look while still giving a reachable edge. The matte gold finish supports use in kitchens, baths, and built-ins where a soft gold tone is part of the hardware palette, aligning the pull with other matte gold hinges, knobs, and fixtures. Because the pull is made of aluminum, it suits upper and lower cabinets where reducing hardware weight is useful across multiple fronts in a large run.
The 96 mm center-to-center measurement on the Amerock BP741496MGMG pull gives installers a fixed reference when laying out drilling patterns, helping line up hardware in straight, repeatable rows along drawers and doors. Using the specified 8-32 x 1 inch screw size ties directly into common cabinet construction thicknesses, so the fastener length can clamp the aluminum pull securely without adding extra projection beyond the interior panel. The 1 inch by 1 inch base dimensions at each mounting point help seat the pull squarely against the face, which supports consistent alignment when sighting along multiple fronts in a bank of cabinets. With a 1-3/16 inch projection, the pull extends far enough from the surface to clear typical door and drawer faces, giving users space for their fingers while keeping the hardware compact enough for tight walkways around cabinets. The combination of the slender 3/8 inch width and the nearly 7 inch overall length also helps create a long, straight visual line that can tie several fronts together, improving the finished appearance of the installation.
The Amerock BP741496MGMG pull has a 3-3/4 inch (96 mm) center-to-center, 6-15/16 inch overall length, 1-3/16 inch projection, 3/8 inch width, and 1 inch by 1 inch base, guiding layout and visual proportion.
The 96 mm center-to-center spacing on this pull matches a common drill layout, letting installers align multiple doors and drawers using the same hole pattern for consistent hardware placement.
The Amerock Transcendent BP741496MGMG pull is made from aluminum, which keeps the handle light during handling and mounting while still providing a metal grip surface on cabinet fronts.
The matte gold finish on this pull offers a subdued gold tone with low reflectivity, helping it coordinate with similar finishes and reducing glare under typical kitchen or bath lighting.
The Amerock BP741496MGMG pull uses 8-32 x 1 inch screws, so the threaded connection matches that specification when fastening through the cabinet door or drawer front into the pull.
This Amerock Transcendent pull has a 1-3/16 inch projection, providing space between the handle and cabinet face so fingers can grip the pull without rubbing the door or drawer surface.
The Amerock Transcendent series BP741496MGMG pull from Wurth Baer Supply pairs a 3-3/4 inch (96 mm) center-to-center span with a 6-15/16 inch overall length, giving cabinet projects a defined drill layout and extended grip. Its matte gold finish and aluminum construction provide a soft gold look on a light, metal-bodied pull that suits doors and drawers across a full run of cabinets. For jobs built around the 96 mm spacing, this pull offers consistent dimensions that support clean alignment and a coordinated appearance from one cabinet front to the next.