Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Transcendent cabinet pull 96mm identifies this pull as part of the Amerock Transcendent Series, so it matches projects built around that specific decorative hardware family. The pull is categorized as a handle in the Decorative Hardware & Moldings Handles and Pulls class, so it is suited to cabinet and furniture door or drawer applications where a graspable pull is required. Its center-to-center dimension of 3-3/4 in (96 mm) sets the fastener spacing, so it aligns with standard 96 mm boring patterns on cabinet fronts. The pull length of 6-15/16 in creates a longer grip area than the bore spacing alone suggests, giving hands more room while the screw pattern stays at 96 mm. A listed projection of 1-3/16 in spaces the pull away from the face, creating finger clearance when opening doors or drawers.
The 3-3/4 in (96 mm) center-to-center dimension on this Amerock Transcendent Series pull sets the distance between mounting holes, which governs drilling or re-using existing 96 mm bores on cabinet doors or drawer fronts. With an overall length of 6-15/16 in, the pull extends beyond the fixing points at each end, which influences layout near door edges, rails, or adjacent hardware lines. The 1-3/16 in projection indicates how far the grip section stands off the surface, so the clearance is known when working near face frames, neighboring doors, or wall surfaces. A 3/8 in width defines the slender bar thickness along the front, which shapes both the visual line and how the fingers wrap around the pull during everyday operation.
This Amerock Corporation Transcendent Series pull is identified for use as a handle in the Decorative Hardware & Moldings Handles and Pulls category, so it targets cabinetry, casework, and similar furniture fronts. The 3-3/4 in (96 mm) center-to-center measurement matches common 96 mm drill patterns, which is advantageous on jobs that involve repetitive boring on production cabinet lines or refacing existing fronts with 96 mm spacing already established. Because the overall length reaches 6-15/16 in, the pull covers a longer span on each front, which can visually balance wider drawers while still tying into the same 96 mm hole locations. Base dimensions of 1 in by 1 in at each end clarify the land area at the contact points, allowing hardware layouts that maintain a consistent reveal from edge profiles or panel details. The Transcendent collection name gives installers and designers a clear reference when coordinating this pull with other Amerock decorative hardware from the same series on multi-room or whole-house projects.
The aluminum material noted for this Transcendent Series pull defines the metal type at the core of the handle, which informs how it behaves when tightened against wood or composite cabinet substrates during repetitive installation. A projection of 1-3/16 in standardizes stand-off distance from the door or drawer face, so installers can expect consistent finger clearance across every front that uses this model. The slender 3/8 in width keeps the grip bar visually light while still giving an edge for the hand, which is useful when repeating the same pull on banks of drawers or tall door runs. The Matte Black / Silver Champagne finish specification identifies the exact color combination delivered on the pull surface, which supports consistent finish coordination when repeating this model across multiple cabinets in the same space. Referencing the Amerock Corporation manufacturer part number BP741496MBSC ties all of these details to a single cataloged component, helping maintain uniform hardware selection on reorders or phased installation schedules.
The Amerock Transcendent cabinet pull 96mm has a center-to-center dimension of 3-3/4 in (96 mm), which sets the hole spacing used for mounting on doors or drawer fronts.
The pull length is 6-15/16 in, so it spans beyond the 96 mm mounting points and presents a longer grip area and visual line on the cabinet front.
The BP741496MBSC cabinet pull uses aluminum material, providing a metal handle body that remains relatively lightweight on doors and drawers across an installation.
This aluminum cabinet pull has a projection of 1-3/16 in, establishing the distance from the cabinet face to the grip area for finger clearance.
The pull bar width is 3/8 in, creating a narrow front profile that affects both the visual appearance and the feel of the edge when grasped.
The finish is Matte Black / Silver Champagne, defining a two-tone appearance that can coordinate with cabinet finishes and other decorative hardware.
The Amerock Transcendent Series BP741496MBSC pull combines a defined 3-3/4 in (96 mm) center-to-center with a 6-15/16 in overall length, giving a recognizable layout for repetitive cabinet drilling and alignment. Its aluminum construction and 1-3/16 in projection specify how the handle stands off from the face during daily use, while the Matte Black / Silver Champagne finish and 3/8 in width set the visual impact on each front. When a project calls for a Transcendent collection handle with these exact dimensions and finish, this model provides a clearly identified option.