Amerock Transcendent pull 96mm identifies this handle as part of Amerock Corporation's Transcendent collection, so installers can match it consistently across a project. The pull uses a 3-3/4 in (96 mm) center-to-center hole spacing, which fits common cabinet drilling patterns and streamlines layout on doors and drawers. Its overall length of 6-15/16 in creates a longer gripping area, giving hands more room when opening larger fronts. The pull is made from aluminum, keeping weight down on the door while still providing a solid feel during everyday use. A projection of 1-3/16 in stands the handle off the face, creating clearance for fingers without pulling the hardware too far into the room. The 3/8 in width presents a slim profile that coordinates easily with other decorative hardware and moldings in the space.
The center-to-center measurement of 3-3/4 in (96 mm) defines the hole spacing for this pull, so boring at this distance positions the posts correctly on the cabinet face. With a projection of 1-3/16 in, the handle stands away from the door or drawer front enough to clear typical door edges and trim details while remaining tight to the cabinetry line. The 1 in by 1 in base dimensions give each mounting point a square footprint, which aids in keeping the pull aligned square to rails and stiles. The specified 3/8 in width sets the grip thickness, so installers know how this pull will feel in the hand compared to other Amerock handles and pulls on the job.
This pull belongs to Amerock Corporation's Transcendent collection, placing it within a coordinated family of decorative handles and pulls for cabinetry. The category listing under Decorative Hardware & Moldings|Handles and Pulls identifies it for use on cabinet doors and drawers rather than structural applications. The Matte Black / Matte Gold finish gives the hardware a two-tone appearance, which works well on projects that mix dark cabinet faces with warm metal details such as lighting or faucets. Constructed from aluminum, the pull keeps overall door weight low when used across many fronts in a kitchen or shop setting. The 6-15/16 in overall length makes it suitable for both base and wall cabinets, because the longer bar visually spans more of the front surface. The 3/8 in width keeps the profile slim enough to sit comfortably next to adjacent hardware and moldings without crowding tight reveals.
The manufacturer part number BP741496MBMG uniquely identifies this specific Matte Black / Matte Gold pull, which helps keep orders and job specs clear when multiple finishes are present. The 3-3/4 in (96 mm) center-to-center measurement works with common drilling jigs, so repeated boring across a run of cabinets stays consistent from door to door. With a projection of 1-3/16 in, the pull provides predictable clearance behind the hand, which aids in planning for nearby trim, tall doors, or adjacent appliance panels. The 1 in by 1 in base dimensions give an exact footprint for each post, which is useful when aligning hardware relative to narrow stiles or face-frame widths. Being part of the Amerock Transcendent line, this pull coordinates with other Amerock handles and pulls, supporting uniform hardware layouts across multi-room projects. The aluminum construction supplies a known material when matching to other decorative hardware components specified as aluminum on project documents.
This Amerock Transcendent cabinet pull has a 3-3/4 in (96 mm) center-to-center size, so the mounting holes are spaced 96 mm apart for consistent cabinet drilling.
The BP741496MBMG Amerock pull measures 6-15/16 in in overall length, has a 1-3/16 in projection off the cabinet, a 3/8 in width, and 1 in by 1 in base dimensions.
This Amerock aluminum cabinet pull is made from aluminum, which provides a solid feel while keeping individual cabinet door weight relatively low.
This Transcendent series cabinet handle has a Matte Black / Matte Gold finish, creating a two-tone look that coordinates with dark surfaces and warm metal fixtures.
This Amerock Transcendent cabinet pull has a 1-3/16 in projection, so it stands just over one inch off the cabinet face for finger clearance.
The manufacturer part number BP741496MBMG identifies this exact Matte Black / Matte Gold Transcendent pull, helping keep product selection organized when multiple finishes are used.
The Amerock Transcendent pull 96mm pairs a 3-3/4 in (96 mm) center-to-center layout with a 6-15/16 in overall length, giving projects a consistent drilling pattern and extended grip. Its Matte Black / Matte Gold finish and aluminum construction align with the Transcendent collection and other Amerock handles and pulls, supporting unified hardware specification. For cabinetry work that calls for defined base dimensions, known projection, and a coordinated Amerock decorative hardware look, this pull matches those requirements on doors and drawers.