Amerock Transcendent pull 96mm describes a 3-3/4 in (96 mm) center to center cabinet pull that gives a defined mounting span for drilling clean, repeatable handle holes. This pull is part of the Amerock Transcendent Series, so it maintains a consistent design language across matching hardware on the same project. The pull uses a Matte Black / Polished Nickel finish, which creates a two-tone look that can visually tie together dark cabinet faces and lighter metal fixtures on doors or appliances. The pull is made from aluminum, keeping the component light while still providing a solid handhold across its full length during daily door and drawer use. Its role in the Decorative Hardware & Moldings category positions it as both a functional grip and a visible design element on finished cabinetry.
This Amerock Transcendent Series pull uses a 3-3/4 in (96 mm) center to center spacing with an 8-32 x 1 in screw size, so the mounting interface is based on a standard machine-screw thread used across many cabinet handles. The 96 mm hole span supports use on metric-drilled fronts while also matching the common 3-3/4 in layout in many shops, simplifying template use. With a projection of 1-3/16 in from the cabinet surface, the handle provides usable finger clearance once installed without extending excessively into working aisles. The 1 in by 1 in base at each end presents a square footprint that can be aligned visually with rails, stiles, or reference lines during drilling and final tightening.
The Amerock Transcendent Series 3-3/4 in (96 mm) center to center pull functions as a handle for cabinet doors and drawers where a defined 96 mm mounting span is required. Its Matte Black / Polished Nickel finish positions it for use on projects that combine dark cabinet finishes with lighter metal fixtures, helping maintain visual continuity across hardware. The handle length of 6-15/16 in establishes a substantial grip area on the face, making it suitable for both standard doors and many drawer fronts using the same drilling pattern. With a width of 3/8 in and base dimensions of 1 in by 1 in at each mounting point, the pull occupies a narrow horizontal band on the face, which works well on framed and frameless cabinet constructions where rail height or overlay dimensions limit hardware space.
The specified 3-3/4 in (96 mm) center to center measurement allows installers to work with existing jigs or templates set up for 96 mm pulls, supporting repeatable drilling across multiple doors and drawer fronts. The 8-32 x 1 in screw size creates a predictable engagement depth through typical cabinet front thicknesses, which helps maintain consistent clamping force at the 1 in by 1 in bases. The 1-3/16 in projection establishes an exact standoff from the surface, so clearances can be planned around adjacent doors, appliances, or wall returns. The overall 6-15/16 in length lets multiple pulls line up evenly across wide banks of drawers while still referencing the same 96 mm hole pattern, simplifying layout on large runs. Built from aluminum, the pull keeps overall door or drawer weight impact low, which can be helpful when balancing soft-close hardware performance with decorative handle selection.
The Amerock Transcendent pull uses a 3-3/4 in (96 mm) center to center size, which sets the hole spacing for drilling and aligns with common 96 mm cabinet hardware layouts.
The pull length is 6-15/16 in, so it spans a noticeable portion of a door or drawer front while still using the 96 mm mounting pattern for straightforward layout.
The BP741496MBPN Amerock pull is made from aluminum, which keeps the handle relatively light on doors and drawers while still providing a solid gripping surface.
The handle projection is 1-3/16 in from the cabinet surface, giving finger clearance for a comfortable grip while limiting how far it extends into the room.
The pull width is 3/8 in, so it presents a slim profile on cabinet faces and can sit neatly on narrow rails or stiles without overwhelming the door design.
This Amerock decorative handle uses a Matte Black / Polished Nickel finish, combining a dark base tone with a brighter accent that coordinates with mixed metal projects.
The Amerock Transcendent pull 96mm center to center offers a defined 3-3/4 in mounting span, a 6-15/16 in overall length, and a 1-3/16 in projection, giving clear measurements to match layout plans. Its Matte Black / Polished Nickel finish and aluminum construction provide a recognizable style and weight profile for coordinating with other Amerock Transcendent Series hardware. For projects that call for a 96 mm center to center Amerock cabinet pull with this specific finish combination and footprint, this handle aligns to those requirements.