Amerock Transcendent cabinet pull is a decorative handle designed for cabinets and similar casework, giving doors and drawers a defined handhold that streamlines opening and closing. The pull is part of the Transcendent collection, so it delivers a consistent visual style wherever this series is used. Its polished nickel finish reflects light along the handle, which helps the pull stand out against many cabinet finishes during everyday use. The aluminum material keeps the pull lightweight, which is useful when multiple pulls are mounted across a large run of cabinetry. With a center-to-center size of 5-1/16 in (128 mm), the pull spans common mid-size drawer and door widths often chosen in kitchens, baths, and shop storage.
The 5-1/16 in (128 mm) center-to-center measurement defines the distance between mounting holes, so it guides drilling layouts when this pull is used on new cabinet fronts. Because the overall length is 8-3/16 in, the handle extends beyond the screw points at each end, which helps balance the pull visually on wider drawer faces. The 1 in by 1 in base dimensions at each foot create square landing areas, so each end has a consistent footprint on the cabinet surface during layout. A projection of 1-3/16 in establishes the standoff from the face, affecting how fingers clear the edge of doors or drawer fronts during normal operation.
This Amerock handle for cabinets is classified under Handles and Pulls, so it suits cabinet doors and drawers in woodworking projects that use decorative hardware. The Transcendent collection identity ties this pull to a specific Amerock design family, which matters when multiple hardware pieces in the same area need the same visual language. Its 5-1/16 in (128 mm) center-to-center layout is a practical size for many base and wall cabinets, giving enough span to feel substantial on typical residential cabinet fronts. The 8-3/16 in overall length lets the pull cover a noticeable portion of the drawer or door width, which can help visually anchor larger faces without overpowering smaller ones.
Polished nickel as the stated finish gives the aluminum pull a reflective metallic appearance, which aligns with projects where other fittings use polished nickel. Since the pull is made from aluminum, the hardware adds minimal weight to doors and drawers, which is useful when many pulls from the same Transcendent series are installed across a whole room of cabinetry or shop fixtures.
The fixed 5-1/16 in (128 mm) center-to-center measurement lets installers repeat the same drilling pattern, which supports straight rows of handles and consistent reveals from cabinet to cabinet. With a projection of 1-3/16 in, the pull stands off the surface at a known distance, helping users understand how far the hardware will extend into walkways or work zones. The 3/8 in width shapes the gripping surface into a narrow bar, which supports a firm pinch or hook-style grip along the length of the handle.
The base dimensions of 1 in by 1 in at each mounting point define square contact patches, which can be helpful when aligning the pull relative to door edges or rail profiles. The overall 8-3/16 in length provides a predictable footprint, so repeated use of this same model across multiple cabinets gives a unified scale and rhythm to the hardware layout.
The pull has a 5-1/16 in (128 mm) center-to-center size, setting the distance between mounting holes and guiding drill layouts for consistent handle spacing.
The pull length is 8-3/16 in, so it stretches beyond the screw centers to give more gripping area and a substantial visual presence on cabinet fronts.
The pull projects 1-3/16 in from the cabinet face, creating defined finger clearance behind the handle during normal opening and closing.
The handle is made from aluminum with a polished nickel finish, pairing a lightweight construction with a bright, reflective surface on the cabinet.
Each base measures 1 in by 1 in, creating square contact points that help define where the pull meets the cabinet surface.
The pull width is 3/8 in, forming a slim bar profile that maintains a clean look while still providing a defined gripping edge.
This Amerock Transcendent 128mm pull offers a defined 5-1/16 in center-to-center mounting pattern, an 8-3/16 in overall length, and a 1-3/16 in projection, giving installers clear layout dimensions for cabinet hardware runs. The aluminum construction with polished nickel finish ties this handle to Transcendent collection projects where matching decorative hardware matters. For cabinet doors and drawers that call for a slim 3/8 in wide bar with 1 in by 1 in bases, this pull provides consistent sizing across every installation using the BP7414128PNPN part.