Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Transcendent cabinet pull is an aluminum handle designed for cabinet and furniture doors where a 5-1/16 in (128 mm) center-to-center layout is required. The dual Matte Black / Matte Gold finish creates a two-tone look that visually defines the pull on the door face, which helps installers and users quickly read handle placement on darker or lighter fronts. The 8-3/16 in overall length gives the hand plenty of contact area, supporting steady door or drawer operation on wider fronts. A 1-3/16 in projection spaces the grip off the surface, allowing fingers to wrap behind the pull without crowding the panel. The 3/8 in width keeps the profile lean while still providing a clear edge to grab, which works well on tight runs of doors. Amerock part number BP7414128MBMG ties directly to the Transcendent collection, helping match this pull with existing Amerock Transcendent hardware on a project.
The 5-1/16 in (128 mm) center-to-center mounting dimension on this Amerock Transcendent pull lines up with a widely used drilling standard, which supports fast layout with jigs or templates already set to that spread. With an overall length of 8-3/16 in, the pull extends beyond the mounting points, giving a proportional look on taller doors or wider drawers where a short pull might appear undersized. The 1 in by 1 in base at each end creates square contact points that visually register against rail or stile lines, making it easier to judge alignment by eye during installation. A 1-3/16 in projection defines the working gap between the pull and the cabinet face, giving consistent finger clearance from one cabinet run to the next.
This Amerock BP7414128MBMG pull is part of the Transcendent collection, which positions it well for use anywhere that same collection is already specified, keeping a unified look across a room. The 5-1/16 in (128 mm) center-to-center size fits layouts that call for a mid-length pull, working on both doors and drawers without changing drill patterns between cabinet types. Its 8-3/16 in length provides more handle coverage on wide drawer fronts, helping spread the operating force across the panel when users grab near the ends. The dual Matte Black / Matte Gold finish lets the pull bridge mixed metal schemes, so one part number can serve areas where black fixtures meet warmer gold tones. The 1 in by 1 in base dimensions suit stiles and rails with enough flat area, giving the pull a defined footprint on standard cabinet framing.
The defined 5-1/16 in (128 mm) center-to-center measurement allows installers to set drilling jigs once and repeat the same pattern across a full run, reducing layout time and helping doors line up visually. The narrow 3/8 in width keeps the pull clear of adjacent fronts, which is useful on tight reveals where wider hardware could crowd neighboring doors. The 1-3/16 in projection creates a predictable stand-off from the cabinet face, so fingers experience similar clearance on every opening and the pull does not sit too tight to the surface. With 1 in by 1 in bases at each end, the pull gives a clear reference square for aligning to cabinet edges or mid-rails, supporting consistent placement from cabinet to cabinet. The overall 8-3/16 in length provides an easy visual check for symmetry on pairs of doors, helping maintain even sightlines along the installation.
The Amerock Transcendent cabinet pull uses a 5-1/16 in (128 mm) center-to-center dimension, which aligns with a common drilling pattern for cabinet doors and drawers.
The Amerock BP7414128MBMG pull has an overall length of 8-3/16 in, giving a longer gripping span suitable for wider cabinet doors and drawers.
The pull has a 1-3/16 in projection from the mounting surface, creating space behind the handle for fingers to comfortably grasp the pull.
Each end of the pull has a base measuring 1 in long by 1 in wide, providing a defined footprint on the cabinet surface at each mounting point.
The Transcendent Series pull has a Matte Black / Matte Gold finish, creating a two-tone appearance suited to mixed metal or contrasting cabinet designs.
This Amerock Transcendent cabinet pull is made from aluminum, providing a solid handle body in a lightweight material for cabinet and furniture use.
The Amerock Transcendent cabinet pull with 5-1/16 in (128 mm) center-to-center drilling gives installers a defined layout dimension that works across many cabinet runs. Its 8-3/16 in length, 1-3/16 in projection, and 1 in by 1 in bases translate into predictable fit and consistent finger clearance from door to door. Pairing aluminum construction with a Matte Black / Matte Gold finish, this BP7414128MBMG pull supports projects that need a two-tone look tied to a specific Amerock collection. Use this pull when a mid-length handle with repeatable mounting dimensions is required on cabinet doors or drawers.
Sold In: 1 Each