Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Transcendent pull 128mm identifies this pull as part of Amerock Corporation's Transcendent collection with a 128 mm (5-1/16 in) center-to-center drilling, so it lines up with that standard hole pattern on cabinet doors and drawers. The pull is made from aluminum, which provides a metal construction while keeping overall handle weight low on the face of the cabinet. Its Matte Black / Polished Nickel finish combines two finishes on one piece, giving a contrasting look that can coordinate with both dark and light cabinet hardware layouts. The pull measures 8-3/16 in in overall length, so it spans a wider portion of the front, giving hand clearance across the face. A projection of 1-3/16 in sets the grip away from the cabinet surface to allow fingers to wrap behind comfortably. The width is 3/8 in, creating a narrow front profile across the stile or rail.
The stated 5-1/16 in center-to-center layout defines the exact distance between the two mounting points, so it aligns with pre-bored 128 mm handle layouts on standard cabinets. An overall length of 8-3/16 in gives the installer a clear sense of how much of the rail or drawer front this pull will cover visually. With a projection of 1-3/16 in, the grip stands off far enough from the cabinet surface to create hand clearance without extending excessively into the working aisle. The 3/8 in width keeps the handle visually slim while still offering a defined gripping edge. Each base measures 1 in long by 1 in wide, setting the contact area against the cabinet face for a consistent seating surface around each fastener point.
This pull is categorized under Decorative Hardware & Moldings in Handles and Pulls, indicating its role as a visible cabinet handle for doors and drawers. As part of the Amerock Transcendent collection, it is suited to projects where a coordinated series look is desired across multiple fronts. The 5-1/16 in (128 mm) center-to-center dimension makes it appropriate for cabinets drilled on that metric or imperial pattern, which is common on many kitchen, bath, and casework layouts. Its Matte Black / Polished Nickel finish works in installations where two-tone metal details are planned on the project. With an overall length of 8-3/16 in and a narrow 3/8 in width, it visually stretches along the front while keeping a slim profile, which suits both tall doors and wider drawers that benefit from a longer pull.
The 128 mm center-to-center drilling combined with the Amerock BP7414128MBPN part number gives a precise reference for repeat orders across large runs of cabinets, helping installers maintain uniform handle spacing. The projection of 1-3/16 in defines how far the pull stands off the surface, so clearances between adjacent doors, drawers, and nearby walls can be planned around that dimension. A 1 in by 1 in base at each end determines the exact footprint touching the front, helping conceal the immediate area around the mounting holes once drilled. The aluminum material identifies the pull as metal, which interacts predictably with typical cabinet substrates when tightened to the face. The dual Matte Black / Polished Nickel finish is specified, allowing designers to match the pull finish to other named finishes in a schedule for consistent project documentation and quoting.
The Amerock Transcendent pull has a 5-1/16 in (128 mm) center-to-center dimension, so the mounting holes are spaced on that pattern for cabinet doors and drawers.
The Amerock BP7414128MBPN pull has an overall length of 8-3/16 in, so it spans a significant portion of the cabinet front for a longer gripping area.
This Transcendent pull is made from aluminum, which gives a metal construction while keeping overall handle weight low on doors and drawers.
This cabinet pull has a projection of 1-3/16 in, setting the grip away from the cabinet surface so fingers can wrap behind during use.
The pull has a Matte Black / Polished Nickel finish, so it combines dark and light metal tones on one handle for two-tone hardware schemes.
Each base on this pull measures 1 in long by 1 in wide, defining the contact area against the cabinet front at each mounting point.
The Amerock Transcendent Series 5-1/16 in (128 mm) center-to-center Matte Black / Polished Nickel pull brings a defined set of dimensions for predictable cabinet layouts. With aluminum construction, a 128 mm drilling pattern, 8-3/16 in overall length, 1-3/16 in projection, and 1 in by 1 in bases, it provides a consistent reference for planning door and drawer fronts across a project. For cabinet work built around this center-to-center size and finish combination, this pull offers a clearly specified option ready to match installation drawings and hardware schedules.