Amerock Transcendent pull 160mm center to center describes a cabinet handle with a 6-5/16 in center-to-center mounting span, which sets consistent hole spacing so doors and drawers line up visually across a run. The aluminum material establishes a light, rigid pull body that supports everyday cabinet opening without adding unnecessary door weight. A 9-7/16 in overall length stretches the visual footprint across wider faces, which helps proportion tall doors or broad drawers. The Silver Champagne finish defines the surface color tone, giving a muted metallic look that works with many decorative hardware layouts. A 3/8 in width concentrates the grip zone, which leaves more of the cabinet face exposed for a cleaner appearance. A 1-3/16 in projection sets the stand-off from the mounting surface, which creates finger clearance while keeping the pull close enough to avoid frequent bumping.
The 6-5/16 in center-to-center measurement establishes the drilling layout for this Amerock pull, so jigs or CNC programs can be set directly to that dimension for repeat runs. The 1 in by 1 in base dimensions define the footprint at each end, which helps position the pull on narrow rails without running past the edge. A 9-7/16 in overall length shows how much of the door or drawer face the handle spans, which is useful when matching existing hardware or balancing multiple pulls on a wide front. The 1-3/16 in projection fixes how far the gripping surface stands out, which affects knuckle clearance when pulling doors open near adjacent cabinets.
The Amerock Transcendent Series 6-5/16 in center-to-center Silver Champagne pull functions as a decorative and functional handle on cabinet doors and drawers. Its aluminum construction suits typical cabinet and furniture installations where a lighter pull reduces load on hinges and slides. The Silver Champagne finish positions the pull for use in layouts that call for a soft metallic accent, supporting cohesive runs on kitchen, bath, or built-in cabinetry that use the same tone. The 9-7/16 in length allows the handle to span a meaningful portion of wider faces, which benefits tall pantry doors or oversized drawers needing a longer gripping area. With a 3/8 in width and 1-3/16 in projection, the pull presents a slim profile off the face, which is useful where fronts swing close to adjacent panels or appliances and a low-profile handle helps avoid frequent contact. The 1 in by 1 in base dimensions give a compact footprint at each contact point, which lets the pull sit fully on standard frame rails or slab edges.
The defined 6-5/16 in (160 mm) center-to-center spacing on this BP7414160SCSC Amerock Transcendent pull lets installers use standard metric or imperial drilling guides, which speeds layout and helps keep handles aligned across long banks of fronts. The aluminum material keeps the pull weight modest, which contributes to smooth action on doors and drawers that already carry hardware loads from hinges or slides. A 9-7/16 in overall length with 3/8 in width creates a long, narrow handle, which makes it easier to maintain straight visual lines when multiple pulls are mounted at the same height. The 1-3/16 in projection is fixed, so planners can calculate door swing clearances around walls or neighboring cabinets with that stand-off in mind. Base dimensions of 1 in by 1 in set a predictable contact area, which simplifies positioning relative to door edges or stile widths. The Silver Champagne finish standardizes the color specification, which helps designers and builders repeat this exact look across projects when matching an existing scheme.
The Amerock Transcendent Series pull has a 6-5/16 in (160 mm) center-to-center size, which sets the distance between mounting holes for consistent drilling across doors and drawers.
The BP7414160SCSC pull measures 9-7/16 in in overall length, which lets it span a good portion of wider cabinet doors or drawers for a balanced look.
This Amerock Transcendent pull is made from aluminum, which creates a light, rigid handle suitable for regular cabinet door and drawer use.
The pull has a 1-3/16 in projection, which sets the stand-off from the cabinet face and provides finger clearance while keeping the profile relatively low.
The pull is 3/8 in wide, giving a slim grip that exposes more of the cabinet surface while still offering a defined handhold.
Each base on the pull measures 1 in by 1 in, which defines the contact footprint on the cabinet surface for layout and edge spacing.
The defined 6-5/16 in (160 mm) center-to-center spacing, 9-7/16 in overall length, and 1-3/16 in projection make this Amerock Transcendent aluminum pull straightforward to plan into new or existing cabinet runs. The Silver Champagne finish and 3/8 in slim width deliver a specific visual profile that can be repeated across multiple fronts. For projects where precise hole spacing, consistent clearances, and a known Amerock part number BP7414160SCSC matter, this pull offers clear dimensions that support efficient layout and a coordinated finish.