Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Transcendent 160mm pull identifies this handle as part of Amerock Corporation's Transcendent collection, which helps match it with other pulls from the same series on a project. The pull is a decorative handle in the Handles and Pulls class, so it is suited for cabinet and furniture door or drawer applications where a trade-focused decorative hardware solution is needed. The material is aluminum, which keeps the pull light while providing a solid feel during everyday cabinet operation. The finish is matte gold, giving a subdued gold appearance that supports contemporary and transitional design work across multiple rooms. The listed center-to-center size is 6-5/16 inches, which aligns the handle with many standard cabinet drilling patterns used in shops. The manufacturer part number BP7414160MGMG ties directly to Amerock's catalog, which supports consistent reordering for future jobs or service work.
The 6-5/16 inch center-to-center measurement defines where mounting holes are drilled, so installers can lay out new fronts or reuse existing holes that match this spacing. The 9-7/16 inch overall length means the pull extends beyond the mounting points, which helps visually span wider drawer fronts or tall doors. With a projection of 1-3/16 inches, the handle stands off the surface enough to clear fingers, which supports smooth use when hands approach from above or below. The 3/8 inch width concentrates the gripping surface, which can aid precise hand placement on narrower rail sections. Base dimensions of 1 inch by 1 inch at each end define the footprint that contacts the cabinet face, which helps position the pull relative to panel edges. The 8-32 x 1 inch screw specification points to a through-bolt mounting style into the cabinet front, which suits typical shop drilling methods.
The pull belongs to the Amerock Transcendent collection, so it aligns visually with other Transcendent handles and pulls used across a kitchen, bath, or built-in project. Its category as decorative hardware in Handles and Pulls identifies it as a front-facing piece for doors and drawers, rather than a concealed hinge or functional bracket, which keeps it in the designer hardware scope. The matte gold finish delivers a muted gold tone, which coordinates well with fixtures and fittings using similar finishes in residential or commercial millwork. With an overall length of 9-7/16 inches and a 6-5/16 inch center-to-center, the pull is sized for medium to larger cabinet fronts, where longer hardware supports proportion and user grip. The aluminum material keeps the pull light on the door edge, which can be helpful on thinner fronts where added mass is not desired.
The defined 6-5/16 inch center-to-center spacing gives installers a clear drilling pattern to repeat across banks of doors and drawers, which helps keep lines consistent on runs of cabinetry. The 1-3/16 inch projection sets a reliable stand-off from the face, so templates and jigs can be set once to maintain consistent hand clearance across the job. With a 3/8 inch width, the pull's grip area is predictable for layout relative to stile and rail dimensions, which matters when aligning hardware with panel reveals. The 1 inch by 1 inch base dimensions at each end give a measurable landing area, so positioning relative to edges or corner details can be repeated accurately. The specified screw size of 8-32 x 1 inch signals a standard machine-thread fastener length, which simplifies tool choice and threading expectations on shop or site installations. The manufacturer number BP7414160MGMG links directly to this exact matte gold, aluminum Transcendent pull, which helps specifiers and installers order the same part for future phases or service calls without remeasuring.
The Amerock Transcendent 160mm pull has a 6-5/16 inch center-to-center dimension, so drill holes can follow this spacing for consistent alignment on cabinet doors and drawers.
The pull length is 9-7/16 inches overall, which lets it span a good portion of medium and larger fronts for comfortable gripping and balanced appearance.
The pull is made from aluminum with a matte gold finish, giving a light yet solid-feeling handle and a subdued gold look on the cabinet face.
The projection is 1-3/16 inches, creating space between the cabinet and handle so fingers can comfortably grab the pull from different angles.
This Amerock decorative cabinet hardware uses 8-32 x 1 inch screws, a common machine thread size that suits standard cabinet front drilling thicknesses.
Each base measures 1 inch long by 1 inch wide, which defines the contact footprint on the cabinet and can cover many smaller existing pull holes.
The Amerock Transcendent 160mm pull combines a 6-5/16 inch center-to-center layout with a 9-7/16 inch overall length, so runs of cabinetry can share the same drilling pattern and visual scale. Its aluminum construction and 1-3/16 inch projection provide a light yet practical handle profile that works across doors and drawers. The matte gold finish and 3/8 inch width give each front a slim, modern look while still offering a confident grip. The defined 1 inch by 1 inch base dimensions and 8-32 x 1 inch screw specification support repeatable installation on new work or upgrades. Use manufacturer part number BP7414160MGMG when selecting this pull for projects that call for coordinated Amerock Transcendent hardware.