Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Transcendent matte black pull provides a 6-5/16 in center-to-center mounting span, which matches common cabinet boring patterns so installers can span standard hole spacing on doors and drawers. The pull is part of the Transcendent collection, so multiple pieces can coordinate visually across a project for consistent hardware styling. Its matte black finish presents a low-sheen surface that visually recedes, which helps hardware blend into darker cabinet fronts and reduce visual glare under task lighting. The pull is made from aluminum, giving a solid metal construction while keeping weight low for easier handling during repetitive installs. Overall length of 9-7/16 in gives generous hand clearance across wider drawer fronts, which supports a comfortable grip on both small and larger cabinet faces.
The 6-5/16 in center-to-center layout provides a clear drilling reference, so cabinet fronts can be bored accurately for this Amerock Transcendent cabinet pull across multiple units. The 1 in by 1 in base dimension at each end defines the bearing surface against the wood, helping installers read how close to door edges or stile boundaries they can place the pull without overhanging. With a 1-3/16 in projection, the pull stands off the face enough to allow fingers to wrap behind, which supports comfortable operation on heavier drawers and tall pantry doors. The 3/8 in bar width keeps the touch surface compact, which can help when aligning several pulls in tight vertical or horizontal runs on built-ins.
This 6-5/16 in center-to-center Amerock Transcendent cabinet pull suits cabinet and drawer fronts bored for that specific spread, which is common in kitchen, bath, and built-in storage layouts. The 9-7/16 in overall length lets the pull span a significant portion of wider drawers, giving users a broad grab point when pulling from different positions along the front. Its 1-3/16 in projection off the surface creates room for full fingers, which is useful on deeper drawers where a firm grasp is needed to move loaded boxes. The 3/8 in width keeps the bar from feeling bulky, which fits visually with modern flat-panel doors or slim rail profiles. The matte black finish gives a uniform dark tone, which can support design schemes that call for contrast on light fronts or near-invisible hardware on dark cabinets.
The defined 6-5/16 in center-to-center measurement allows installers to use jigs or drill templates set to this spread, which supports consistent hardware alignment across a run of cabinets. Base dimensions of 1 in by 1 in at each end create a predictable bearing pad, which can help cover slight chipping at the bore and give a stable seating surface against the door or drawer face. With the pull made from aluminum, each piece remains lighter than many solid steel alternatives, which can reduce fatigue when handling and mounting numerous pulls on large projects. The 1-3/16 in projection and 3/8 in bar width together define the pull geometry, which helps designers predict how far hardware will stand off and how it will interact with neighboring doors in tight reveals. The specified 8-32 x 1 in screw size ties directly to standard cabinet hardware practices, which supports straightforward installation in typical door and drawer thicknesses where that thread and length are commonly applied.
The Amerock Transcendent matte black pull has a 6-5/16 in center-to-center dimension, which sets the distance between mounting holes for fitting to cabinet doors and drawers.
The BP7414160MBMB pull measures 9-7/16 in in overall length, which allows it to span a good portion of wider drawers or doors for a broader grip area.
The Amerock aluminum pull projects 1-3/16 in from the cabinet face, which creates finger clearance behind the bar for comfortable everyday operation.
The pull is made from aluminum with a matte black finish, which provides a solid metal feel and a low-sheen dark appearance on cabinet fronts.
Each mounting base on the Transcendent pull measures 1 in long by 1 in wide, which defines the footprint bearing against the cabinet surface.
The BP7414160MBMB pull is specified with 8-32 x 1 in screws, which aligns with a standard cabinet hardware thread and length for typical front thicknesses.
This Amerock Transcendent cabinet pull pairs a 6-5/16 in center-to-center layout with a 9-7/16 in overall length, giving clear drilling references and a generous grip span for cabinet doors and drawers. Its aluminum construction, 1-3/16 in projection, and 3/8 in width define a compact but usable profile that suits many residential and commercial cabinet faces. The matte black finish and 1 in by 1 in base pads support clean alignment and a consistent visual line across runs. For projects built around this specific spread and finish, this pull offers defined dimensions that fit layout planning and installation workflow.