Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Transcendent pull 160mm is an aluminum cabinet handle with a center-to-center length of 6-5/16 in, so it spans wider drawer fronts or doors while keeping hole spacing consistent. The 9-7/16 in overall length gives a longer gripping area, which helps when operating larger cabinet doors or heavier drawers. A projection of 1-3/16 in sets the pull out from the face, providing finger clearance during use. The 3/8 in width creates a slim profile, so the pull sits visually light on the cabinet front while still offering a defined edge to grasp. A base size of 1 in by 1 in at each mounting point presents a compact footprint against the surface, which helps when laying out multiple pulls in a run of doors. The matte black and silver champagne finish combination defines the visual style, supporting projects that call for contrasting decorative hardware.
The 6-5/16 in center-to-center measurement governs the mounting spacing, so installers can transfer this single dimension across a bank of doors for uniform alignment. With the base set at 1 in by 1 in, the contact area remains predictable at each screw location, which is useful when centering the pull on narrow rails or framing. The 9-7/16 in overall length then extends visually beyond those bases, creating a defined bar across the front that reads consistent from cabinet to cabinet. A projection of 1-3/16 in keeps the handle standing off the surface by a known amount, which ties into clearance planning around adjacent doors or nearby walls. The slim 3/8 in width limits how much visual space the pull occupies on the face, which helps maintain proportion on both small and large fronts.
This Amerock Transcendent series pull belongs to the decorative handles and pulls category, so it functions as a primary operating point on cabinet doors and drawers. The 6-5/16 in center-to-center spacing works with layouts where medium to longer pulls are preferred, such as base cabinets or wider drawer stacks. With an overall length of 9-7/16 in, the pull visually matches larger fronts, which can help maintain scale on pantry units or multi-drawer banks. The 1-3/16 in projection gives users a defined gap between the front and the gripping bar, supporting repeated openings in busy workspaces. Because the base dimensions are 1 in by 1 in, the pull suits fronts that provide at least that surface area around each mounting point, which is common on face-frame and frameless cabinetry styles.
The defined 6-5/16 in center-to-center measurement provides a fixed drilling pattern, which helps produce straight visual lines of pulls across multiple cabinets. When installers know the projection is 1-3/16 in, they can position doors and adjacent surfaces so the handle clears edges during swing or drawer travel. The aluminum construction sets a consistent material for each pull, which supports uniform weight and feel along a full installation run. The narrow 3/8 in width affects how close neighboring pulls can sit without appearing crowded, which is important on smaller drawer stacks. The 1 in by 1 in base dimensions give a clear reference for crosshair marks, keeping each pull square to door edges and rails. The matte black and silver champagne finish pairing defines the visual impact, helping coordinate this pull with other Amerock decorative hardware used on the same project.
The Amerock Transcendent BP7414160MBSC has a 6-5/16 in center-to-center measurement, which matches layouts using 160 mm spacing for cabinet doors and drawers.
The Amerock BP7414160MBSC pull has an overall length of 9-7/16 in, giving extra bar length beyond the mounting points for hand placement on wider fronts.
The Amerock Transcendent series BP7414160MBSC pull is made from aluminum, providing a light handle structure across cabinet doors and drawers.
The BP7414160MBSC pull projects 1-3/16 in from the cabinet surface, creating a consistent finger clearance gap behind the handle during operation.
Each base on the Amerock BP7414160MBSC measures 1 in long by 1 in wide, defining the footprint that sits against the cabinet surface.
The BP7414160MBSC pull has a matte black and silver champagne finish combination, supporting mixed-finish decorative hardware schemes.
The Amerock Transcendent series 6-5/16 in center-to-center pull BP7414160MBSC brings a 9-7/16 in overall length, 1-3/16 in projection, and 3/8 in width to cabinet fronts, all in aluminum with a matte black and silver champagne finish. These defined dimensions support consistent drilling patterns and visual alignment across cabinet doors and drawers in woodworking projects.