Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Transcendent pull 160mm center to center identifies this aluminum cabinet handle as part of Amerock Corporation's Transcendent collection, which gives installers a consistent design language across multiple cabinet and furniture runs. The 6-5/16 in center-to-center drilling dimension sets the exact distance between mounting holes, so fabricators can drill accurately for new work or align with existing holes during change-outs. The overall 9-7/16 in length defines the visual span on the door or drawer front, which helps lay out multiple pulls in a straight, even pattern on banks of cabinets. The dual Matte Black / Polished Nickel finish creates a two-tone appearance, which lets designers coordinate with both dark appliances and lighter metal elements in the same room. The 3/8 in width keeps the pull visually lean, while the aluminum material keeps weight low, which is useful on wider or thinner drawer fronts.
The 6-5/16 in center-to-center drilling requirement makes this Amerock Transcendent cabinet pull a direct fit for layouts using that common spread, so shop jigs and CNC programs can rely on a repeatable measurement. The stated 8-32 x 1 in screw size aligns with a standard cabinet hardware thread, which supports straightforward installation into typical thickness cabinet fronts tapped or drilled for that thread. The 1-3/16 in projection from the door or drawer face defines how far the pull stands off, giving a known clearance band for fingers while helping designers keep profiles flush with adjacent panels. The 1 in by 1 in base dimensions at each end indicate the square contact area, providing a predictable footprint for routing, drilling clearance, or covering prior impressions when updating existing fronts.
This handle is categorized as a Decorative Hardware & Moldings item in the Handles and Pulls class, so it is suited to cabinet, furniture, and similar casework where a mounted pull is needed. The 6-5/16 in center-to-center layout matches common drilling on many cabinet doors and drawers, which helps during both new construction and replacement work using that spread. Its 9-7/16 in overall length gives a proportion that works well on wider drawers or medium to tall doors, helping keep the pull visually balanced on the panel face. The Matte Black / Polished Nickel finish pairing lets it visually bridge between dark frames and lighter hinges or fixtures in the same installation. With a 3/8 in width, the pull can be placed relatively close to door edges or face-frame details while still looking refined and not visually heavy.
The precise 160 mm (6-5/16 in) center-to-center value allows jigs or boring equipment to be set once, then repeated across a run of cabinets for consistent alignment. The 1-3/16 in projection keeps the handgrip offset predictable, which supports clean lines where doors need to open past adjacent cabinets without excessive stand-off. The 1 in by 1 in base dimensions at each mounting point define exactly how much surface area is covered at each screw connection, which helps hide minor chipping around holes from prior hardware of similar footprint. The Amerock Corporation branding and BP7414160MBPN manufacturer part number give a precise identifier, which helps shops reorder the same pull for future phases or to match existing hardware in expansions. The aluminum construction keeps mass low along the 9-7/16 in length, which is practical on larger fronts where multiple pulls are used and total hardware weight can add up.
The Amerock Transcendent cabinet pull uses a 6-5/16 in (160 mm) center-to-center drilling span, which defines the hole spacing needed on doors and drawers.
The BP7414160MBPN Amerock pull has a 9-7/16 in overall length, which sets its visual reach across the cabinet face and influences proportion on wider fronts.
This 6-5/16 in center-to-center pull has a Matte Black / Polished Nickel finish, giving a two-tone look that coordinates with both dark and light metal elements.
The Amerock Transcendent cabinet pull is made from aluminum, which keeps the handle lightweight along its 9-7/16 in length for use on various cabinet fronts.
This cabinet pull projects 1-3/16 in from the door or drawer face, creating consistent finger clearance while keeping the profile relatively close to the cabinet front.
This Amerock cabinet pull is specified with 8-32 x 1 in screws, which defines the compatible thread size and length for fastening into standard cabinet fronts.
The defined 6-5/16 in (160 mm) center-to-center drilling, 9-7/16 in overall length, and 1-3/16 in projection give this Amerock Transcendent pull clear dimensions to design around on doors and drawers. The aluminum construction and Matte Black / Polished Nickel finish pair visual appeal with a lighter handle weight for cabinet and furniture work. For projects built around 160 mm hardware layouts, this BP7414160MBPN model offers a consistent, repeatable specification for new runs or coordinated upgrades.