Amerock Transcendent matte black pull is a 7-9/16 in (192 mm) center-to-center aluminum handle that gives cabinets a consistent, repeatable grip point across doors and drawers. The Transcendent collection identity signals a coordinated look across related Amerock handles, which matters when matching hardware on a larger run of casework. The matte black finish creates a non-reflective surface along the 10-11/16 in overall length, which helps the pull visually anchor lighter fronts without glare under task lighting. The 1-3/16 in projection holds the hand away from the door or drawer face, supporting comfortable operation while the 3/8 in width presents a slim profile. Base dimensions of 1 in by 1 in define the footprint at each mounting point, which is useful when covering existing marks on refaced cabinetry or laying out drilling jigs.
The 7-9/16 in (192 mm) center-to-center measurement is the critical mounting dimension on this Amerock Transcendent handle, because it dictates exact drill locations for both fasteners. This repeatable spacing works well with standard cabinet hardware templates when laying out new fronts or replacing older pulls that share the same measurement. The 10-11/16 in overall length helps installers visualize edge clearances near adjacent pulls or appliance handles. The 1-3/16 in projection keeps the pull comfortably away from the surface, which matters when mounting on doors with deeper edge profiles. The 1 in by 1 in base size provides a consistent reference block at each end for aligning to stiles, rails, or drawer fronts.
The Amerock Transcendent cabinet pull sits in the Handles and Pulls category, so it suits applications where a continuous hand grip is preferred over a knob. Its 7-9/16 in (192 mm) center-to-center spread makes it a strong fit for standard-width cabinet doors and medium to wide drawers, giving users a stable grab point across the face. The matte black finish works well wherever a dark, uniform look is needed across cabinet runs, tying together doors and drawers visually. The 10-11/16 in total length spans more of the front, which helps on tall pantry doors or larger drawer fronts where short pulls might look undersized. With 1-3/16 in projection, the pull also serves comfortably on deeper fronts where hand clearance matters, such as full-overlay cabinet designs.
The 7-9/16 in (192 mm) center-to-center distance on the Amerock Transcendent pull allows installers to use a single drilling pattern across multiple cabinets, which reduces layout time and helps keep lines straight from door to door. The 1 in by 1 in base dimensions at each mounting point give a predictable square footprint, useful when aligning the pull to rail edges or centering on drawer fronts. The 3/8 in width offers a narrow bar that still presents enough surface for the hand, which can be helpful on smaller fronts where space is limited near edges or adjacent cabinets. The 1-3/16 in projection defines how far the handle stands off, which supports consistent finger clearance across both face-frame and frameless installations. The aluminum material keeps the pull in the decorative hardware class while providing a solid feel along the full 10-11/16 in length.
The Amerock Transcendent matte black pull has a 7-9/16 in (192 mm) center-to-center dimension, which sets the exact hole spacing used to drill cabinet doors and drawers.
The Amerock Transcendent cabinet pull measures 10-11/16 in in overall length, so it spans a good portion of wider drawers and doors for a substantial hand grip.
The Transcendent 7-9/16 in cabinet pull has a 1-3/16 in projection, holding the bar away from the cabinet surface to provide finger clearance during opening.
The Amerock Transcendent handle has base dimensions of 1 in by 1 in at each end, creating a square footprint that helps align the pull with rails or stiles.
The Amerock Transcendent pull is made from aluminum with a matte black finish, providing a uniform dark appearance suitable for decorative cabinet hardware.
The BP7414192MBMB Amerock pull uses 8-32 x 1 in screws, which match the threaded inserts in the pull and guide drill sizing for cabinet fronts.
The Amerock Transcendent matte black pull with 7-9/16 in (192 mm) center-to-center spacing provides a defined layout dimension, a 10-11/16 in overall span, and a 1-3/16 in projection that supports everyday use. The aluminum construction and 3/8 in slim width give it a modern profile within the Handles and Pulls class. For cabinet projects that call for a coordinated matte black look across doors and drawers, this BP7414192MBMB pull offers consistent sizing and clear mounting references for efficient installation.