Amerock Transcendent cabinet pull uses the Transcendent Series design to give cabinets and furniture a consistent, modern look that installs the same way across a job. The handle style serves typical decorative hardware and molding applications where handles and pulls from Amerock are specified. A 7-9/16 in (192 mm) center-to-center dimension sets precise drill spacing, so shop layouts repeat cleanly from door to door. The 10-11/16 in overall length creates a substantial hand grip across wider drawers or tall doors. A 1-3/16 in projection keeps fingers clear of the cabinet face, supporting comfortable use on frequently opened fronts. The 3/8 in width provides a slim visual line while still offering enough surface for a secure pull. A base dimension of 1 in by 1 in at each end defines clear landing pads on the door or drawer front during alignment and installation.
The 7-9/16 in (192 mm) center-to-center drilling dimension defines where holes land, so boring equipment or templates can be set once and used across a run of cabinets. The 10-11/16 in overall length informs how far the pull will extend across the face, which helps position it away from adjacent edges or neighboring hardware. A 1-3/16 in projection sets the standoff from the surface, supporting clearance over door profiles and edge treatments. The 3/8 in width affects how the pull sits visually on narrow rails or drawer fronts, which helps with deciding orientation and spacing in multi-pull layouts. Base dimensions of 1 in by 1 in provide a clear footprint, useful when aligning the pull to panel lines or when matching multiple pulls on tall doors.
This Amerock Transcendent Series pull is classified under decorative hardware and moldings in the handles and pulls class, so it aligns with cabinet, furniture, and similar millwork installations. The aluminum material suits projects where a metal pull is desired without adding unnecessary weight to large doors or multi-drawer banks. The Matte Black / Silver Champagne finish offers a defined contrast that works in designs calling for dark fronts with lighter metal accents or mixed-finish appliance and fixture packages. With a 7-9/16 in (192 mm) center-to-center span and 10-11/16 in overall length, the pull is sized for wider drawers, tall cabinet doors, or built-ins where a longer grip bar is preferred for daily use. The 1-3/16 in projection supports comfort on frequently accessed storage by keeping fingers away from the door face during opening and closing motions.
The 7-9/16 in (192 mm) center-to-center dimension allows a single boring setup to be reused, which helps keep hole placement consistent on banks of cabinets and reduces layout time. The 1 in by 1 in base dimensions at each end give clear reference points to align with door rails, stiles, or layout marks, helping achieve straight, repeatable runs of pulls. A 3/8 in width keeps the pull slim enough for use on narrow drawer fronts while still providing a defined edge for gripping. The 10-11/16 in overall length lets installers visually balance the pull across wider faces, aiding in symmetric layouts on tall built-ins or long drawer stacks. The Matte Black / Silver Champagne finish ties multiple fronts together visually, which is useful when coordinating hardware across kitchens, baths, or office millwork using the same Amerock Transcendent styling.
The Amerock Transcendent cabinet pull is part of decorative hardware and moldings in the handles and pulls class, fitting cabinet, furniture, and similar millwork projects needing a metal pull.
The 7-9/16 in (192 mm) center-to-center measurement sets exact hole spacing, allowing repetitive drilling setups on cabinets and drawers for consistent alignment across a job.
The 10-11/16 in overall length gives a long grip area across wider drawers or tall doors, helping users grab the pull comfortably anywhere along its span.
The 1-3/16 in projection sets the standoff from the cabinet face, helping fingers stay clear of the surface and supporting comfortable operation on frequently used fronts.
The 1 in by 1 in base dimensions create square landing areas that line up well with rails, stiles, or layout marks, helping achieve clean, repeatable positioning.
The Matte Black / Silver Champagne finish provides a two-tone appearance, helping tie together cabinets and spaces that use both dark surfaces and lighter metal accents.
The Amerock Transcendent cabinet pull, model BP7414192MBSC, combines a 7-9/16 in (192 mm) center-to-center layout with a 10-11/16 in overall length to support large-door and wide-drawer applications. Its aluminum construction and Matte Black / Silver Champagne finish provide a defined look suited to decorative hardware and molding projects. With a 1-3/16 in projection, 3/8 in width, and 1 in by 1 in base dimensions, the pull offers predictable clearances and alignment points that matter on repeat cabinet installations. For projects needing a longer Amerock handle and pulls solution with consistent drilling dimensions, this Transcendent Series pull is built to match that layout approach.