Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Transcendent pull 192mm uses a 7-9/16 in center-to-center mounting span, so it bridges typical cabinet and drawer hole spacing while giving a longer hand grip for comfortable use. The pull belongs to Amerock's Transcendent collection, which keeps hardware styling consistent across a project when matching other pieces from the same line. Its aluminum material keeps weight down while still giving a solid feel on doors and drawers in everyday use. The pull finish combines Matte Black and Matte Gold, adding a defined two-tone contrast that stands out against light or dark fronts and helps tie mixed finishes together on a job. Overall length of 10-11/16 in lets this pull visually balance wider drawer fronts, while still fitting comfortably on standard cabinet widths.
This Transcendent pull is designed with a center-to-center measurement of 7-9/16 in (192 mm), which sets the exact distance between mounting points for drilling or aligning pre-bored fronts. The pull uses screw size 8-32 x 1 in, so the threaded interface is standardized for many cabinet door and drawer applications that tap into matching inserts or run through the panel to the pull. A projection of 1-3/16 in defines stand-off from the surface, giving predictable clearance behind the pull when planning door reveals or drawer stack spacing. The 1 in by 1 in base at each end identifies the area that will contact the surface, useful when working near panel edges, decorative profiles, or narrow framing members.
This Amerock Transcendent Series pull is identified as a handle and pull product within decorative hardware and moldings, placing it in typical cabinet and drawer applications where a linear grip is needed. The 7-9/16 in center-to-center span lets it work on medium to large cabinet doors and many drawer fronts where longer hardware lines up visually with the face size. Its 10-11/16 in overall length means the pull can extend closer to the ends of a drawer on wider pieces, which can help match proportion across a bank of drawers in a kitchen or shop setting. The combination Matte Black / Matte Gold finish suits projects that mix darker frames with lighter panels or want contrast between hardware and substrate, making the pull a design element as well as a working handle. Aluminum construction keeps each pull lighter than many solid steel options, which can help when multiple pulls are mounted on large doors, reducing total hardware weight on hinges.
The specified 7-9/16 in (192 mm) center-to-center measurement provides a fixed reference dimension, which supports the use of drilling jigs or templates to repeat hole locations across multiple cabinets. With a 3/8 in width, the pull maintains a narrow bar profile that allows close placement near panel edges or between framed details without visually crowding surrounding elements. The 1-3/16 in projection quantifies how far the grip stands off, which helps maintain consistent finger room when combined with door overlays or drawer front thickness in a run of cabinetry. Base dimensions of 1 in by 1 in at each mounting point give a set bearing area, which can cover minor surface imperfections around the holes and create a stable contact patch against the cabinet face. The specified screw size 8-32 x 1 in defines the thread and shank length, simplifying planning when boring through typical cabinet front thicknesses that work well with this length.
The Amerock Transcendent pull uses a 7-9/16 in (192 mm) center-to-center measurement, which sets the hole spacing for doors and drawers that need this specific mounting distance.
The pull has an overall length of 10-11/16 in, so it visually spans more of the cabinet or drawer front and provides a longer gripping area for daily use.
The pull has a projection of 1-3/16 in, meaning it stands that distance off the cabinet face to give finger clearance behind the handle when opening.
The Amerock BP7414192MBMG pull is made from aluminum, providing a lighter hardware option that still offers a solid feel on cabinet doors and drawers.
The Transcendent pull uses 8-32 x 1 in screws, so its threaded connection matches common cabinet hardware practices using that screw size.
The pull uses a Matte Black / Matte Gold finish, creating a two-tone look that adds contrast and ties together cabinets using both dark and warm metallic elements.
The Amerock Transcendent pull 192mm centers around a 7-9/16 in mounting span, simplifying projects that call for this specific drilling pattern across multiple fronts. Its 10-11/16 in overall length and 1-3/16 in projection give predictable grip dimensions when laying out kitchens, baths, or shop cabinets. With aluminum construction and a Matte Black / Matte Gold finish, it supports both functional handling and a defined visual accent on doors and drawers. For work that relies on consistent hole spacing and a coordinated look from piece to piece, this pull aligns dimensions and finish in a single, repeatable choice.