Amerock Transcendent pull 192mm describes a cabinet handle from the Transcendent collection designed for projects that call for a defined 7-9/16 in center-to-center drilling pattern, so it works where that hole spacing is already laid out. The pull is part of Amerock Corporation decorative handles and pulls, so it slots directly into cabinet and furniture hardware layouts that follow this brand family. Its aluminum construction keeps weight down while providing a solid feel in hand, which helps doors and drawers move smoothly during repeated daily use. The Matte Black / Polished Nickel finish presents a two-tone look on one part, which gives designers a way to bridge dark fronts with lighter hinges or nearby metal components. With a total length of 10-11/16 in, the pull spans wider drawer fronts cleanly, which supports a balanced visual line across banks of cabinetry.
This Amerock Transcendent series pull uses a 7-9/16 in (192 mm) center-to-center layout, which defines the drilling pattern for doors or drawers so the handle lines up consistently across a full bank. The aluminum material keeps the profile light even at 10-11/16 in overall length, which helps large fronts move without feeling overly weighted at the edge. A projection of 1-3/16 in sets the standoff from the cabinet face, which creates a defined space for fingers while holding the grip close enough for tight hallways or galley runs. Base dimensions of 1 in long by 1 in wide mark out the footprint at each end, which helps when aligning the pull square to the door stile or drawer edge during installation.
The Amerock Transcendent Series 7-9/16 in (192 mm) Center to Center Matte Black/Polished Nickel Pull, BP7414192MBPN, suits cabinet and furniture applications that follow the 7-9/16 in center-to-center standard, which is common on wider drawers and full-height doors. Its placement in the Decorative Hardware & Moldings category under Handles and Pulls positions it for use on residential or commercial casework where appearance matters along with function. The aluminum construction supports use on kitchen cabinets, bathroom vanities, or built-in storage, where a lighter handle helps doors and drawers move without adding extra load to hinges or slides. The Matte Black / Polished Nickel finish lets this pull sit between dark cabinet faces and lighter metal parts, which is useful when tying together mixed finishes across knobs, pulls, and adjacent room hardware.
The overall 10-11/16 in length stretches across broader drawer fronts or tall doors, which lets designers center the pull for visual balance on large panels. A width of 3/8 in keeps the profile slim, which fits narrow rails or minimal slab designs without crowding the panel face. Base dimensions of 1 in by 1 in define compact mounting points at each end, which is helpful when working near edge details, glass inserts, or profile treatments that restrict landing space. The 1-3/16 in projection keeps the grip comfortably off the surface, which supports a full hand grip while staying close to the cabinet face so doors can swing past adjacent features in tight runs. Within the Amerock Transcendent collection, this pull can be paired with other pieces sharing the same styling language, which helps maintain a consistent look across doors, drawers, and ancillary casework.
The Amerock Transcendent pull BP7414192MBPN uses a 7-9/16 in (192 mm) center-to-center drilling pattern, which sets the precise hole spacing needed for mounting on doors or drawers.
The Amerock Transcendent pull measures 10-11/16 in in overall length, which suits wider drawers or taller doors where a longer handle improves reach and visual balance.
The Amerock Transcendent Series 7-9/16 in pull is made from aluminum, which keeps the handle lighter on the door or drawer while still providing a solid gripping surface.
The BP7414192MBPN pull has a Matte Black / Polished Nickel finish, which creates a two-tone appearance that can bridge dark cabinet faces and brighter metal components nearby.
The Amerock Transcendent pull has a 1-3/16 in projection, which sets the distance from the cabinet face and provides finger clearance for a comfortable grip.
The BP7414192MBPN pull has base dimensions of 1 in long by 1 in wide at each end, which defines a compact footprint for landing on rails or stiles.
The Amerock Transcendent Series 7-9/16 in (192 mm) Center to Center Matte Black/Polished Nickel Pull, BP7414192MBPN, offers an aluminum build, 7-9/16 in drilling layout, and 10-11/16 in overall length that align with cabinet runs needing that specific spread. At Wurth Baer Supply, this handle sits within Decorative Hardware & Moldings under Handles and Pulls, so it fits directly into cabinet hardware schedules that call out Amerock Corporation part numbers. Use its 1-3/16 in projection, 3/8 in width, and 1 in by 1 in bases to plan hole locations and visual spacing across your next bank of doors and drawers.