Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Transcendent matte gold pull is an aluminum cabinet handle designed for decorative hardware and molding applications, so it works well where a clean, modern pull is required on doors or drawers. The 10-1/16 in (256 mm) center-to-center drilling spaces the mounting holes for longer cabinet fronts, which helps align handles consistently on wide drawers or tall doors. The matte gold finish gives a muted metallic look, which helps the pull visually coordinate with modern gold-toned hinges or faucets. The pull length of 13-3/16 in extends beyond the hole spread, which provides more gripping area along the bar for different hand positions. A projection of 1-3/16 in stands the handle off the face, creating finger clearance between the door surface and the pull. The 3/8 in width keeps the profile slim, which supports a streamlined appearance along cabinet runs.
The 10-1/16 in (256 mm) center-to-center dimension defines the exact distance between mounting points, so drilling jigs or templates can be set precisely for repeat cabinet fronts. The pull length of 13-3/16 in shows how far the bar extends across a door or drawer, which aids in choosing placement on wider fronts or in aligning multiple pulls visually. The base dimensions of 1 in by 1 in at each end reveal how much flat surface is needed on rails or stiles, which matters when working near panel edges or narrow frame members. A projection of 1-3/16 in indicates stand-off from the face, so clearances around adjacent doors, walls, or trim can be accounted for in the layout. The 3/8 in width of the bar describes the front profile, which helps plan spacing when used alongside other decorative hardware.
This Amerock Transcendent cabinet pull is part of the Decorative Hardware & Moldings category, which positions it for use on cabinet doors, drawers, and similar furniture fronts. The 256 mm center-to-center drilling aligns with longer drawer faces, so it suits wider base cabinets or pantry sections where a short pull would look undersized. The 13-3/16 in overall length gives the handle visual weight on tall doors, which helps balance the vertical lines of pantry or utility cabinets. With base dimensions of 1 in by 1 in, the feet sit comfortably on most frame-and-panel cabinet rails, which supports use on standard kitchen or bath cabinets. The matte gold finish pairs with designs calling for warm metallic tones, which is useful when coordinating across faucets, lighting, and other decorative metal elements in the same space.
The defined 10-1/16 in (256 mm) center-to-center measurement allows installers to standardize drilling setups, which supports consistent alignment across long cabinet runs. Having a known projection of 1-3/16 in keeps the pull comfortably offset from the surface, which helps hands clear raised door profiles during everyday operation. The 3/8 in width creates a slimmer gripping bar, which can ease installation on narrow drawer fronts by reducing the visual bulk of the hardware. Base dimensions of 1 in by 1 in give a predictable footprint for the ends, which simplifies measurements when hardware must clear edge detailing or glass lites. The aluminum construction keeps the pull weight modest, which can be useful on lighter doors or thinner fronts where minimizing load on the mounting area is important. The matte gold finish provides a defined surface appearance, which helps designers and installers work toward a repeatable look across multiple rooms or phases.
The Amerock Transcendent pull has a 10-1/16 in (256 mm) center-to-center measurement, so hole spacing can follow that dimension for accurate alignment across cabinet fronts.
The pull length is 13-3/16 in, giving extra bar beyond the mounting points, which provides a generous gripping area on wider drawers or taller doors.
This 256 mm center to center pull is made from aluminum material, which keeps it light on the door or drawer while still defining a solid handhold.
The handle projection is 1-3/16 in, which sets the stand-off from the cabinet face and provides finger clearance during opening and closing.
The bar width is 3/8 in, creating a slim profile that helps the pull sit neatly on narrow drawer fronts or frame members.
Each base measures 1 in long by 1 in wide, which helps gauge how much flat surface is required at the mounting locations.
This Amerock Transcendent cabinet pull uses a 10-1/16 in (256 mm) center-to-center pattern, which suits layouts calling for longer hardware on wide drawers or tall doors. The 13-3/16 in length, 1-3/16 in projection, and 3/8 in width define the handle footprint, which simplifies planning across a full room of cabinets. With matte gold finish and aluminum construction, the pull provides a specific color and material combination for projects needing a warm metallic tone on decorative hardware. For cabinet, furniture, or millwork jobs that match these dimensions and appearance, this handle offers a clearly defined option.