Amerock Transcendent pull 256mm identifies this handle as part of Amerock Corporation's Transcendent Series, so it matches other pieces in the same decorative hardware family for consistent cabinet runs. The pull is categorized under handles and pulls, giving it a straightforward role as a working cabinet handle on doors or drawers. Its 10-1/16 inch (256 mm) center-to-center mounting spreads the load across the face, which helps when operating larger doors or wider drawer fronts. The pull uses an aluminum material, which keeps weight down across multiple installations while still giving a solid hand feel on frequent use. A matte black / silver champagne finish defines the visual contrast, letting installers tie dark fronts to warmer metallic details in a single part number. The manufacturer part number BP7414256MBSC gives an exact reference for matching this pull in future orders or service work.
The 256 mm (10-1/16 inch) center-to-center spacing on this Amerock Transcendent cabinet pull sets a fixed layout for drilling jigs, which helps keep handle rows straight along banks of doors and drawers. Its 13-3/16 inch overall length means the bar reaches beyond the fastener points, which creates a balanced look when centered on wider drawer fronts. A projection of 1-3/16 inches gives enough stand-off from the face, which helps hands clear decorative edge profiles and applied moldings. The 3/8 inch width keeps the pull visually light while still offering a defined edge to grab, which is useful on narrow frame members. With 1 inch by 1 inch bases at each mounting point, the pull seats on a predictable footprint, which supports consistent reveals along cabinetry.
This Amerock Transcendent pull operates as a decorative and functional handle in the Decorative Hardware & Moldings category, so it works on cabinet doors and drawers that specify handles and pulls. The 10-1/16 inch (256 mm) center-to-center dimension aligns well with medium to wide fronts, giving the hardware enough spread to look proportionate on broader faces. Its 13-3/16 inch length adds reach, which is practical on taller pantry doors or wider base drawers where users grab from different angles. A matte black / silver champagne finish delivers a two-tone appearance, letting installers tie into both dark casework and lighter trim in the same elevation. The aluminum material keeps the pull lighter than many solid metal alternatives, which can be useful when hardware is multiplied across large installations. Because the part is supplied by Amerock Corporation under the Transcendent Series and listed by Wurth Baer Supply in handles and pulls, it fits into standard cabinet hardware planning without special classification.
The fixed 256 mm center-to-center mounting of this BP7414256MBSC pull simplifies jig setup, because one layout works across every door and drawer using this model. A projection of 1-3/16 inches sets a consistent hand clearance off the face, which keeps user interaction uniform from one cabinet section to another. The 3/8 inch bar width keeps the profile slim, so multiple pulls can be placed in close visual alignment without overwhelming narrow rails. Each 1 inch by 1 inch base provides a square reference at both ends, helping installers sight the pull parallel to door edges and drawer lines. The 13-3/16 inch overall length gives a clear visual centerline, which aids in aligning hardware to panel centers on wide fronts. With screw size 8-32 x 1 inch defined, installers work with a standard cabinet screw specification that coordinates with typical drilled pilot holes. The combination of aluminum construction and the Transcendent design gives a repeatable look and feel from cabinet to cabinet using the same cataloged part.
The BP7414256MBSC Amerock Transcendent pull has a 10-1/16 inch center-to-center, 13-3/16 inch overall length, 1-3/16 inch projection, 3/8 inch width, and 1 inch by 1 inch base dimensions for layout planning.
The 256 mm (10-1/16 inch) center-to-center spacing lets installers set up one drilling pattern, supporting consistent handle placement across multiple doors and drawers.
The Amerock Transcendent cabinet pull uses a matte black / silver champagne finish, tying dark and light elements together on the same hardware run.
The Transcendent Series BP7414256MBSC pull is made from aluminum, which keeps the handle lighter while still providing a solid grip surface.
This Amerock pull has a projection of 1-3/16 inches, giving consistent finger clearance from the cabinet surface during everyday use.
The cabinet pull is specified with 8-32 x 1 inch screws, matching common cabinet hardware threading and typical door and drawer thicknesses.
The Amerock Transcendent pull 256mm offers a defined 10-1/16 inch center-to-center layout, a 13-3/16 inch overall length, and 1-3/16 inch projection that all work together for consistent cabinet handling. Its aluminum construction and matte black / silver champagne finish present a specific material and color combination under a single BP7414256MBSC part number. When a project calls for a slim 3/8 inch wide bar with 1 inch by 1 inch bases in the handles and pulls category, this Amerock Corporation Transcendent Series pull from Wurth Baer Supply gives a clearly specified option ready to drop into planned drilling patterns.