Amerock Transcendent pull 256mm center to center defines this handle as a 10-1/16 inch center-to-center pull, so installers can match drilling patterns on cabinet doors and drawers for straightforward layout on new work or replacements. The pull is part of the Amerock Transcendent collection, which identifies it as a coordinated style choice across multiple cabinet locations. Aluminum construction keeps the pull lightweight, which can help when multiple pulls are installed on large fronts. The Matte Black / Polished Nickel finish combines dark and bright tones, which supports design decisions where contrast between cabinetry and hardware is important. Overall length of 13-3/16 inches gives the pull a substantial span across wider fronts, which can aid grip for users. A projection of 1-3/16 inches sets the working stand-off from the cabinet face, giving fingertip clearance when opening doors and drawers.
The 10-1/16 inch center-to-center measurement on this Amerock pull sets the exact distance between mounting holes, which allows installers to use standard metric or imperial jigs without recalculating spacing. An overall length of 13-3/16 inches shows how much visual territory the pull will cover, which is useful when aligning hardware with panel proportions or existing reveals. The 1-3/16 inch projection defines how far the hand sits away from the cabinet face, which influences both everyday ergonomics and clearance near adjacent walls or appliances. Base dimensions of 1 inch by 1 inch at each end indicate the bearing area against the door or drawer, which matters when positioning close to frame edges or decorative profiles.
As a handle in the Decorative Hardware & Moldings category, this Amerock Transcendent pull is suited to cabinet doors and drawers where a longer 10-1/16 inch center-to-center pattern is desired. The extended 13-3/16 inch length makes it a practical choice for wider drawer fronts or taller cabinet doors where more hand contact can improve leverage. Its 1-3/16 inch projection creates a defined space for fingers behind the pull, which can be helpful on heavier fronts that need a secure grip. The 3/8 inch width keeps the pull visually lean, which works well on modern or transitional fronts that benefit from a narrow hardware profile. With 1 inch by 1 inch bases at each mounting point, the pull covers a modest area, which can sit cleanly on both flat panels and framed cabinet rails.
The defined 10-1/16 inch center-to-center spacing allows installers to set up drilling jigs once and repeat the pattern across an entire kitchen or bank of casework, which can reduce layout time and help keep hardware lines straight. Knowing the 13-3/16 inch overall length in advance helps in shop drawings and field layout, since the pull can be placed in proportion to drawer widths and stile sizes. The 1-3/16 inch projection is important when cabinets open near corners or other obstacles, because the stand-off distance establishes how the userâ??s hand clears nearby surfaces during operation. The 3/8 inch width influences how the pull feels under the fingers during repetitive use, and the slim edge can complement tight reveals and minimal trim. Base dimensions of 1 inch by 1 inch allow the installer to relate the pullâ??s footprint to existing door construction, which can help when centering on rails or keeping fastener locations inside solid material. As part of the Amerock Transcendent collection with a Matte Black / Polished Nickel finish, the pull supports coordinated hardware choices across multiple cabinets while maintaining consistent dimensions that simplify repetitive installation.
The Amerock BP7414256MBPN pull has a 10-1/16 inch center-to-center, 13-3/16 inch overall length, 1-3/16 inch projection, 3/8 inch width, and 1 inch by 1 inch base, guiding layout and drilling.
The 10-1/16 inch center-to-center measurement gives a fixed hole spacing, so drilling jigs and templates can be set once and repeated across doors and drawers for alignment.
The 1-3/16 inch projection defines how far the pull stands off the cabinet face, providing finger clearance and helping prevent knuckles from contacting the door or drawer surface.
The Matte Black / Polished Nickel finish combines dark and light tones, allowing contrast against various cabinet colors and supporting mixed-metal design schemes.
The Amerock Transcendent cabinet pull is made from aluminum, which keeps the component light while still providing a defined shape along its length.
The 1 inch by 1 inch bases show the contact area at each mounting point, helping align the pull on rails, stiles, or flat panels without crowding edges.
The Amerock Transcendent Series 10-1/16 inch center-to-center Matte Black / Polished Nickel pull provides a clearly specified layout with its 10-1/16 inch center spacing, 13-3/16 inch length, and 1-3/16 inch projection. These dimensions support accurate drilling, consistent alignment, and comfortable hand clearance across cabinet doors and drawers. For projects calling for aluminum construction and a Matte Black / Polished Nickel finish within the Amerock Transcendent collection, this BP7414256MBPN pull offers a defined set of measurements that fit organized cabinet hardware planning.