
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Transcendent matte gold pull provides a 12-5/8 in (320 mm) center-to-center grip that spans wider cabinet doors and drawers, which helps line up multiple fronts for a consistent visual run across a bank of cabinetry. The pull is built from aluminum, so it keeps weight down on large fronts while still giving a solid handhold each time the door or drawer is used. Its matte gold finish delivers a muted, non-reflective look that softens light on the face of the cabinet, which helps when matching other low-sheen decorative hardware in a project. Overall length of 15-3/4 in gives extra reach beyond the screw points, creating clearance around door edges or panel details. A projection of 1-3/16 in stands the pull off the face just enough for fingers to wrap comfortably, which supports everyday use on heavily used kitchen or shop cabinets.
The 12-5/8 in (320 mm) center-to-center measurement gives a fixed distance between mounting points, which simplifies drilling layouts when spacing multiple pulls in a straight horizontal line. Screw size 8-32 x 1 in matches a common machine screw specification for cabinet hardware, which streamlines installation when working with standard door and drawer thicknesses that accept this length. Base dimensions of 1 in long by 1 in wide at each foot define the footprint of the pull on the surface, which allows planning around edge profiles, panel reveals, or existing bore locations. A projection of 1-3/16 in from the cabinet face holds the gripping area out in front, which supports consistent hand clearance on both framed and frameless cabinets built to typical thicknesses.
The 12-5/8 in (320 mm) center-to-center dimension suits wider cabinet drawers and tall doors, which helps bring scale to pantry units, large base cabinets, and long utility drawers. With an overall length of 15-3/4 in, the Amerock Transcendent pull spans more of the front surface, which visually anchors large faces and ties multiple fronts together in a run. The 3/8 in width keeps the profile slim, which works well on modern flat-panel doors where the hardware should stay linear and unobtrusive. A matte gold finish on the aluminum body delivers a warm, muted tone, which supports coordination with other matte gold decorative hardware across a kitchen, bath, or commercial millwork installation.
The defined 12-5/8 in (320 mm) center-to-center spacing gives a precise drilling dimension, which supports repeatable hole placement when using jigs or templates across a full job. Screw size 8-32 x 1 in ties back to a familiar thread and length in cabinet hardware, which helps maintain consistent thread engagement through typical door and drawer front thicknesses. Base dimensions of 1 in by 1 in provide a square footprint at each end, which aids in visually squaring the pull to the door edge during installation. The 1-3/16 in projection controls how far the handle stands off the surface, which keeps the gripping zone consistent from cabinet to cabinet and supports comfortable reach on both upper and lower units. Aluminum construction keeps the pull lighter than many solid steel options, which can be helpful on large fronts where overall door or drawer weight is a consideration during daily operation.
The Amerock Transcendent matte gold pull has a 12-5/8 in (320 mm) center-to-center size, which sets a fixed distance between mounting holes for layout on wider doors and drawers.
The pull has a 15-3/4 in overall length, which lets it span more of the cabinet front to visually fit larger doors and drawers.
The pull projects 1-3/16 in from the cabinet face, which provides practical finger clearance for gripping on everyday-use doors and drawers.
The BP7414320MGMG pull is made from aluminum, which keeps weight down on cabinet fronts while still offering a solid feel in hand.
Each base measures 1 in long by 1 in wide, which defines the footprint needed on the cabinet surface around panel details or edges.
This Amerock Transcendent cabinet pull has a matte gold finish, which delivers a subdued, low-sheen appearance on cabinet faces.
The Amerock Transcendent matte gold pull combines a 12-5/8 in (320 mm) center-to-center layout, 15-3/4 in overall length, and 1-3/16 in projection, which works well where longer aluminum pulls are needed across doors and drawers. By matching its 320 mm drilling dimension, 3/8 in width, and 1 in by 1 in base footprint to your cabinet fronts, this BP7414320MGMG pull can be used to build a consistent matte gold hardware look across a full installation.
Sold In: 1 Each