Amerock Transcendent pull 320mm gives a long, continuous grip point across wider cabinet doors and drawers, using a 12-5/8 in center-to-center layout that aligns with common large-handle drilling patterns. The pull uses Amerock's Transcendent collection design, so it visually matches other Transcendent pieces on the same job for a consistent hardware layout across a full kitchen or bank of casework. Its aluminum construction keeps the piece light while still providing a solid feel at the hand, which helps when multiple pulls are used on tall pantry doors or wide drawer fronts. The Matte Black and Silver Champagne finish combination brings a two-tone appearance that can bridge dark cabinet faces and lighter surfaces in the same space, helping hardware read cleanly against both.
The 320 mm (12-5/8 in) center-to-center spec on the BP7414320MBSC pull defines exactly where to bore for the two mounting points, which speeds layout when repeating the same handle across many fronts. With the pull's 15-3/4 in overall length, installers can visually center the bar on tall doors while still relying on the fixed drilling dimension for repeatable results. The 1-3/16 in projection sets the stand-off from the face, keeping the pull far enough out for a comfortable grasp without pushing into surrounding trim, adjacent doors, or appliance panels. The 1 in by 1 in base size at each end keeps the contact area compact, making it straightforward to land fully on flat sections of a stile or rail.
The Amerock Transcendent Series BP7414320MBSC pull is designed as a cabinet handle within the Transcendent collection, so it suits installations where matching hardware is used across doors and drawers. Its 320 mm center-to-center span fits wide cabinet doors or large drawer fronts where a shorter pull might look undersized, helping the hardware visually balance the panel width. The aluminum material keeps each pull relatively light, which is useful on oversized fronts where multiple pulls may be installed without adding unnecessary weight to the door or drawer assembly. The Matte Black and Silver Champagne finish combination works in layouts that mix darker cabinet faces with lighter counters or surrounds, giving the hardware contrast on both surfaces. The 15-3/4 in overall length also provides an extended grip area that can be used at different heights on tall pantry doors.
The defined 12-5/8 in (320 mm) center-to-center mounting dimension on this Transcendent pull allows installers to set up drilling jigs or templates once and repeat the pattern across a full run of cabinets. The 1 in by 1 in base dimensions at each mounting point give a clear square footprint to reference off door edges or panel profiles, which helps keep pull ends aligned from door to door. The 1-3/16 in projection and 3/8 in bar width create a slim but usable handle profile, so doors can open freely in tight banks without handles crowding each other. The combination of Matte Black and Silver Champagne finishes on an aluminum body delivers a consistent appearance from piece to piece, which supports uniform sightlines when many pulls are aligned along a row of uppers, bases, or tall cabinets.
The Amerock Transcendent BP7414320MBSC pull has a 12-5/8 in (320 mm) center-to-center dimension, which sets the hole spacing for drilling and helps keep handle alignment consistent on wide fronts.
The pull length is 15-3/4 in, so it spans a large portion of cabinet doors or drawers, giving a long gripping area and a proportional look on wider panels.
The BP7414320MBSC pull is made from aluminum, which keeps the handle lighter on big fronts while still providing a solid feel across multiple daily uses.
The pull uses a Matte Black and Silver Champagne finish combination, giving a two-tone look that can coordinate with both dark cabinet faces and lighter surrounding surfaces.
The projection is 1-3/16 in, providing finger clearance behind the pull while keeping it close enough to the door to limit interference with adjacent fronts.
Each mounting base on the BP7414320MBSC pull measures 1 in long by 1 in wide, giving a compact, square footprint that is easy to position on stiles or rails.
The Amerock Transcendent Series 12-5/8 in (320 mm) center-to-center Matte Black/Silver Champagne pull BP7414320MBSC combines a defined 320 mm drilling pattern with a 15-3/4 in overall length, aluminum construction, and a coordinated two-tone finish. Those verified details support consistent layouts and matching sightlines across modern cabinet projects. Use this pull wherever a long, slim handle from the Transcendent collection is needed to align wide doors and drawers with the same hardware footprint.