Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Transcendent pull describes an aluminum handle from the Transcendent collection that is built for everyday cabinet and furniture use. The pull uses a 12-5/8 in (320 mm) center-to-center dimension, so it spans wider drawer and door faces for a modern, stretched look while distributing hand force over a longer length. The total length of 15-3/4 in gives plenty of gripping area, which helps when opening larger or heavier fronts. A projection of 1-3/16 in sets the handle off the surface far enough for a solid, comfortable grip, supporting repeat use in busy kitchens, baths, or work areas. The 3/8 in width keeps the profile slim, so the pull feels visually light while still offering a defined edge to grab. A matte black / polished nickel finish pairs dark and bright tones, letting this single pull coordinate across mixed-metal hinge and faucet choices without visual conflict.
The 12-5/8 in (320 mm) center-to-center drilling dimension sets the hole spacing, so installers can mark and bore precise, repeatable locations across doors and drawers when running multiples. The aluminum construction keeps the pull relatively light for its 15-3/4 in length, which is helpful on wider drawer fronts where several pieces of decorative hardware are mounted. A projection of 1-3/16 in defines standoff from the face, giving hands room without pulling the handle excessively far into the room. The 1 in by 1 in base dimensions locate the load into small, square contact points, which is useful when aligning the pull to rail centers or stile edges. An 8-32 x 1 in screw size is specified, tying the pull to a standard threaded fastener size that suits many cabinet panels of typical thickness.
This Amerock Transcendent pull sits in the decorative Handles and Pulls category, so it is suited for cabinet doors, drawer fronts, and similar furniture applications. The 12-5/8 in (320 mm) center-to-center length connects well with longer drawer fronts in kitchens, bathrooms, or storage areas where a wide grip looks proportional to the face. At 15-3/4 in overall length, the pull spans a significant portion of tall doors or broad drawers, which can visually straighten door lines and help balance heavy fronts. The matte black / polished nickel finish lets the pull bridge between dark cabinet faces and lighter metal components, supporting mixed-finish layouts without switching handle styles. With aluminum as the base material, the pull provides a solid feel while keeping weight modest across installations that repeat this part many times.
The specified 12-5/8 in (320 mm) center-to-center measurement allows installers to build drilling jigs or templates around a fixed spacing, which speeds up repetitive cabinet work and helps keep runs of doors visually aligned. A projection of 1-3/16 in provides enough stand-off so fingers clear the door or drawer edge, improving day-to-day comfort when opening and closing cabinets. The 3/8 in width maintains a clean, linear appearance, which is important when several Transcendent pulls are installed side by side on wide drawer banks. Base dimensions of 1 in long by 1 in wide define the footprint touching the surface, giving a clear reference when setting the pull relative to panel edges, reveals, or mid-rails. The 8-32 x 1 in screw specification ties the handle to a familiar fastener length and thread, which streamlines cabinet shop processes that already use this size across multiple hardware lines.
The Amerock Transcendent pull uses 12-5/8 in (320 mm) center-to-center spacing, so drilling layouts and jigs can be based on that fixed distance across doors and drawers.
The BP7414320MBPN handle has an overall length of 15-3/4 in, giving ample gripping area for wider cabinet drawers and doors in kitchens or other storage installations.
This aluminum cabinet pull projects 1-3/16 in from the surface, allowing fingers to wrap behind the bar comfortably while keeping the handle close to the cabinet face.
The pull has a matte black / polished nickel finish, combining dark and bright metal tones so it coordinates with a range of hinges, faucets, and other decorative hardware.
The 320 mm cabinet pull is made from aluminum, which keeps weight moderate across long handles while still providing a solid, rigid feel on cabinet fronts.
The BP7414320MBPN pull is specified with 8-32 x 1 in screws, aligning it with a common cabinet fastener size for many door and drawer thicknesses.
This 12-5/8 in (320 mm) center-to-center Amerock Transcendent pull gives you a long aluminum handle with a matte black / polished nickel finish, 15-3/4 in overall length, and 1-3/16 in projection, ready to support consistent layouts across cabinets and furniture.