Amerock Calathea 96mm pull is a zinc cabinet handle in the Calathea collection designed for doors and drawers that need a consistent, repeatable grip point. Its 3-3/4 in (96 mm) center-to-center layout aligns with common drilling patterns, helping match existing hole spacing on many cabinet runs. The pull length of 4-7/16 in gives fingers room to grab across the front, which supports everyday use on kitchen, bath, and built-in cabinetry. A projection of 1-1/16 in holds the hand off the door surface, reducing knuckle contact with the face when opening heavier fronts. The 1-1/16 in width provides a solid feel across the rail, which can help when operating wider drawers. A polished chrome finish presents a bright, reflective surface that coordinates with other chrome hardware in the same space.
This Amerock Calathea cabinet pull uses a 3-3/4 in (96 mm) center-to-center mounting, giving a fixed distance between the two fastener locations that guides boring layout on doors and drawers. The pull is designed around 8-32 x 1 in screws, so the threaded interface matches common cabinet hardware practice for typical door and drawer front thicknesses. Its base dimensions of 1/2 in by 1-1/16 in indicate how much surface area each end covers on the face, which matters when aligning multiple pulls along a rail or when working near door panel edges. With a projection of 1-1/16 in, the installed pull stands off the surface enough for fingers to clear the face during everyday use.
The Amerock Calathea cabinet pull in polished chrome suits cabinet doors and drawers where a 3-3/4 in (96 mm) center-to-center layout is required, so it fits projects built around that common drilling pattern. Its 4-7/16 in overall length allows use on typical kitchen and bath fronts without crowding adjacent hardware, which helps maintain consistent spacing in longer cabinet runs. The 1-1/16 in projection works on doors and drawers that need clearance for fingers while staying close enough to the face for a compact appearance. With a width of 1-1/16 in and base dimensions of 1/2 in by 1-1/16 in, the pull suits fronts that provide enough flat area at the mounting points, which supports clean alignment on rails and stiles.
The defined 3-3/4 in (96 mm) center-to-center dimension on the Amerock Calathea 96mm pull supports use with boring jigs or CNC patterns set to that spacing, which helps keep handle locations consistent from cabinet to cabinet. Using the specified 8-32 x 1 in screw size provides a known thread and length pairing with the pull, which supports predictable engagement into standard door and drawer materials. The 4-7/16 in overall length creates a known reference when laying out multiple pulls across a bank of drawers, helping maintain even margins from edges. A consistent projection of 1-1/16 in and width of 1-1/16 in give a uniform stand-off and face coverage from piece to piece, which supports a continuous visual line on larger installations. The polished chrome finish is matched across the pull, giving a single surface appearance that aligns with other polished chrome decorative hardware chosen for the same project.
The Amerock Calathea 96mm pull uses a 3-3/4 in (96 mm) center-to-center spacing, which sets the distance between holes when drilling doors or drawers.
The Calathea cabinet pull is 4-7/16 in long, 1-1/16 in wide, and projects 1-1/16 in, which defines how far it extends and how much face area it covers.
The Amerock Calathea series pull is made from zinc, which provides a metal body suitable for decorative cabinet hardware applications.
The pull has a polished chrome finish, giving a bright, reflective surface that coordinates with other polished chrome hardware in the same room.
This Calathea cabinet pull is specified with 8-32 x 1 in screws, so the pull threads match a common cabinet hardware fastener standard.
Each base on the Amerock Calathea pull measures 1/2 in long by 1-1/16 in wide, which defines the mounting footprint on the cabinet face.
The Amerock Calathea 96mm pull from Wurth Baer Supply brings a defined 3-3/4 in (96 mm) center-to-center dimension, zinc construction, and a polished chrome finish to cabinet doors and drawers. With its 4-7/16 in length, 1-1/16 in width, and 1-1/16 in projection, the pull delivers a consistent gripping profile across a run of fronts. The specified 8-32 x 1 in screw interface and known base dimensions help align drilling and positioning for repeatable cabinet hardware results on new builds or refresh projects using this Amerock cabinet pull.