Amerock Calathea 96mm pull identifies this zinc cabinet pull from the Calathea collection, so installers can match it across a project using the same design language. The 3-3/4 in (96 mm) center-to-center mounting dimension sets the handle hole spacing, which matters when laying out new cabinet fronts or swapping an existing pull without redrilling. A total length of 4-7/16 in provides hand clearance and visual balance on standard cabinet doors and drawers. The 1-1/16 in projection moves the gripping surface off the face of the cabinet, which helps fingers catch the pull easily. A 1-1/16 in width gives a comfortable gripping surface that feels substantial in daily use. Satin Nickel finish brings a muted metallic look, which works well when coordinating with other satin nickel decorative hardware on the same run of cabinets.
The 3-3/4 in (96 mm) center-to-center dimension on this Amerock Calathea satin nickel pull sets a clear standard for drilling or reusing two mounting holes, which streamlines cabinet door and drawer layout. Zinc construction defines the base material, which matters when matching to other zinc decorative hardware on the same project. The 1/2 in by 1-1/16 in base size outlines the footprint where the pull meets the surface, which helps when covering previous hardware marks within that area. The 1-1/16 in projection places the handle at a consistent stand-off from the face, which supports uniform alignment when installed in rows. The specified width of 1-1/16 in determines how much rail space the pull occupies, which is useful when spacing multiple pulls across wider drawers.
This Calathea series pull from Amerock Corporation sits in the Handles and Pulls category, which positions it for cabinet doors and drawers that call for a pull-style grip rather than a knob. The satin nickel finish gives the pull a neutral metallic tone, which works when coordinating with other satin nickel hinges or decorative hardware. With a 3-3/4 in (96 mm) center-to-center dimension, the pull aligns with common cabinet drilling patterns used in many kitchen and bath layouts, which keeps hardware consistent across banks of doors. The 4-7/16 in overall length offers enough span to look at scale on standard-face cabinetry, which helps avoid undersized hardware on larger drawer fronts. The 1-1/16 in projection provides a defined hand gap, which supports regular use on high-traffic cabinets.
The specific 3-3/4 in (96 mm) center-to-center measurement on the Amerock BP100396G10 pull allows jigs and templates set to 96 mm spacing to be used repeatedly, which can speed production runs or multi-unit cabinet installations. The 1/2 in by 1-1/16 in base dimensions define a predictable footprint at each mounting point, which helps maintain a straight visual line when several pulls are aligned across a bank of drawers. A 1-1/16 in projection keeps the handle consistently offset from the door surface, which gives installers a reliable reference when checking clearances near adjacent walls or trim. The 1-1/16 in width provides a standard gripping bar size, which supports a uniform feel when this pull is used alongside other pieces from the same Calathea collection. The zinc material callout provides a clear material specification, which can be important when documenting hardware schedules for cabinet packages.
The Amerock BP100396G10 pull has a 3-3/4 in (96 mm) center-to-center size, which sets the required hole spacing for mounting on cabinet doors or drawers.
The Amerock Calathea satin nickel pull measures 4-7/16 in in overall length, which affects how it visually fills space on cabinet fronts.
This 96 mm center to center handle has a 1-1/16 in projection, which defines how far it stands off the cabinet face for hand clearance.
The Amerock Calathea 96mm pull is made from zinc, which aligns with many decorative hardware components specified in cabinet projects.
The BP100396G10 pull has base dimensions of 1/2 in long by 1-1/16 in wide, which defines the footprint where it meets the cabinet surface.
This Amerock Calathea cabinet pull uses a satin nickel finish, which coordinates with other satin nickel cabinet hardware.
The Amerock Calathea 96mm pull in satin nickel combines a defined 3-3/4 in (96 mm) center-to-center pattern, 4-7/16 in length, and 1-1/16 in projection to support consistent cabinet layouts. For projects calling for zinc pulls from a named Amerock collection, this BP100396G10 model offers clearly specified dimensions that align with common cabinet drilling patterns and visual proportions across doors and drawers.