
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Calathea satin nickel pull is a zinc cabinet handle designed with a 5-1/16 in (128 mm) center-to-center mounting spread, which lines up with standard drill patterns so installers can swap or lay out pulls with predictable hole spacing on cabinets and drawers. The pull is made from zinc, giving the hardware a solid metal construction that supports everyday cabinet use without flex in normal operation. Its satin nickel finish provides a muted metallic look that helps the pull sit visually between stainless tones and brushed hardware in kitchen or shop projects. The overall length of 5-11/16 in gives enough hand contact area across the handle, which helps when operating wider drawers or heavier fronts in typical cabinet installations. A projection of 1-1/16 in stands the pull off the face of the door or drawer, creating finger clearance for comfortable gripping while keeping the handle profile relatively tight to the surface.
This Amerock BP1003128G10 cabinet pull uses a 5-1/16 in (128 mm) center-to-center distance, which lets installers drill or reuse two straight mounting holes on cabinet doors or drawers for a straightforward fit. The pull projects 1-1/16 in from the surface, setting the hand clearance depth so users can comfortably grip the handle during normal opening cycles. With a width of 1-1/16 in across its face, the pull occupies a modest band of space on rails and drawer fronts, which helps it sit well on both narrow and wider applications. The base dimensions of 1/2 in length by 1-1/16 in width define the contact area against the cabinet face, which allows the pull ends to sit flush and cover the immediate area around each hole. Its zinc construction and satin nickel finish pair a metal body with a muted metallic look, which helps the pull function as both working hardware and visible decorative trim.
The Calathea pull with 5-1/16 in (128 mm) center-to-center spacing fits cabinet layouts that follow this common drilling pattern, which is frequently used across kitchen, bath, and shop casework. Its 5-11/16 in overall length lets the pull sit proportionally on standard cabinet doors and medium-width drawers, giving a balanced look that does not overpower the face. The 1-1/16 in projection sets a practical stand-off height, which supports comfortable finger clearance on doors and drawers while keeping the pull closer to the face so it is less intrusive in tight walk-by areas. With a width of 1-1/16 in, the handle maintains a steady visual line on rails and stiles, which helps create a consistent run of hardware when multiple pulls are installed across a bank of cabinets.
The Amerock BP1003128G10 part number identifies this specific Calathea pull configuration, which helps installers and shops reference the exact 128 mm center-to-center size and satin nickel finish when matching or reordering hardware. The zinc material provides a metal body, which supports a solid-feeling pull when doors and drawers are operated repeatedly during everyday cabinet use. Base dimensions of 1/2 in by 1-1/16 in define the footprint that contacts the cabinet surface, which can help visually tidy the area around each mounting point when hardware is upgraded on existing doors. The satin nickel finish carries a consistent tone across the pull, which supports uniform appearance when multiple BP1003128G10 pulls are used in a single installation. By keeping all these dimensions and material details consistent from pull to pull, Amerock Calathea decorative pull hardware helps projects maintain the same alignment, grip feel, and visual rhythm across every cabinet front.
The Amerock Calathea satin nickel pull has a 5-1/16 in (128 mm) center-to-center size, which sets the hole spacing and allows alignment with common cabinet drilling patterns.
The Amerock BP1003128G10 cabinet pull has an overall length of 5-11/16 in, which provides an extended gripping area across cabinet doors and drawers.
This satin nickel pull projects 1-1/16 in from the cabinet surface, which sets the depth of finger clearance behind the handle during use.
The Calathea cabinet pull is made from zinc, which provides a solid metal body for regular cabinet door and drawer operation.
The base dimensions are 1/2 in length by 1-1/16 in width, which define the contact footprint against the cabinet face at each mounting point.
This Amerock Calathea decorative pull uses a satin nickel finish, which gives the hardware a soft, brushed-metal appearance on cabinets.
The Amerock Calathea satin nickel pull with 5-1/16 in (128 mm) center-to-center spacing, 5-11/16 in overall length, and zinc construction gives cabinet projects a defined combination of size, material, and finish. Those fixed dimensions and its specific BP1003128G10 identification support consistent selection across multiple doors and drawers when a project calls for uniform satin nickel hardware. Choosing this satin nickel zinc cabinet pull where 128 mm center-to-center drilling is planned or existing allows doors and drawers to share the same grip feel, stand-off, and visual style throughout the installation.
Sold In: 1 Each