Amerock Calathea brushed gold pull gives cabinet doors and drawers a defined 5-1/16 in (128 mm) center-to-center mounting span, which sets precise hole spacing so repetitive drilling layouts stay consistent across a run of fronts. The 5-11/16 in overall length creates a visual margin beyond the mounting points, helping doors and drawers look balanced when aligned in banks. A 1-1/16 in projection provides finger clearance from the cabinet face, which supports comfortable gripping without knuckles dragging the surface. The 1-1/16 in width gives a stable contact surface, helping hands find the pull quickly on heavier fronts. Zinc construction creates a solid metal body, giving the pull a substantial feel during everyday use. The brushed gold finish defines the color and sheen on the visible surfaces, helping installations match other brushed gold decorative hardware in the same space.
The 5-1/16 in center-to-center spacing on the Amerock Calathea cabinet pull sets the exact distance between fastening points, which matters when aligning with existing 128 mm holes or laying out new drilling jigs. A 1/2 in long by 1-1/16 in wide base at each end outlines the bearing pad against the door or drawer front, which helps distribute load over the surface when the pull is tightened down. The 1-1/16 in projection fixes how far the grip stands off the face, which is useful when coordinating with overlay doors so fingers clear neighboring fronts. The specified 8-32 x 1 in screws match a standard cabinet thread size, which supports straightforward fastening into typical cabinet door and drawer materials.
The Calathea 128mm center to center pull is described as decorative hardware in the handles and pulls category, which positions it for cabinet doors and drawers where visible hardware is part of the finished look. Its brushed gold finish defines the surface appearance, which suits projects that already use brushed gold hinges or other visible metal components. The 5-11/16 in overall length creates a proportional look on standard cabinet fronts, which helps when repeating the same pull across upper and lower runs. With a 1-1/16 in width, the grip section presents enough surface for fingers to catch from different angles, which supports use on both doors and wider drawers in kitchen, bath, or shop cabinetry built around metal pulls.
The Amerock Calathea cabinet pull uses a fixed 5-1/16 in (128 mm) center-to-center measurement, which aligns with common drilling templates so installers can repeat hole spacing accurately across a project. The 1/2 in by 1-1/16 in base dimensions at each mounting point define the footprint over each hole, which helps cover cleanly drilled openings while keeping layout marks hidden once the pull is installed. A 1-1/16 in projection helps keep hands off finished door and drawer surfaces during operation, which can reduce smudging on painted or laminated fronts over time. Zinc construction defines a solid metal core for the handle, which supports a uniform feel from pull to pull when opening heavier drawers. The brushed gold finish gives the visible surfaces a consistent color and texture, which helps multiple pulls read as a matched set when installed in straight lines or grid layouts.
The Amerock Calathea brushed gold pull has a 5-1/16 in (128 mm) center-to-center spacing, which sets the exact hole distance needed on cabinet doors or drawers.
The Calathea 128mm center to center pull measures 5-11/16 in in overall length, which defines the visual footprint on the cabinet face from end to end.
The Amerock Calathea brushed gold pull has a 1-1/16 in projection, which sets the distance the grip stands off the cabinet surface for hand clearance.
The Amerock Calathea cabinet pull is made from zinc, which defines it as a cast metal component for everyday cabinet door and drawer operation.
The Calathea pull is specified with 8-32 x 1 in screws, which sets the thread and length standard for fastening through typical cabinet fronts.
Each mounting base on the Amerock Calathea pull measures 1/2 in long by 1-1/16 in wide, which defines the bearing area against the cabinet surface.
The Amerock Calathea brushed gold pull, part number BP1003128BGL, pairs a 5-1/16 in (128 mm) center-to-center span with a 5-11/16 in length, which suits cabinet runs that repeat the same drilling pattern. Zinc construction and a brushed gold finish define both the metal body and appearance, which helps align this pull with other brushed gold decorative hardware on the job. With a 1-1/16 in projection and 1-1/16 in width, the pull sets predictable clearances and grip feel from door to door and drawer to drawer, which supports uniform results across a full installation.