
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Calathea pull 128mm center to center describes a cabinet handle designed around a precise 5-1/16 in center-to-center hole spacing, so it aligns with common drilled layouts on doors and drawers. The pull length of 5-11/16 in spans a wider hand area, giving fingers more room to grab, which helps on heavier fronts. A projection of 1-1/16 in sets the pull off the face just enough for a comfortable grip without sticking out too far, useful on tight walkways. The 1-1/16 in width creates a substantial contact surface, so the hand feels a solid edge instead of a thin bar. Black Chrome finish defines the visual tone, bringing a dark metallic look that coordinates with modern cabinet hardware schemes. Zinc material under the finish provides a stable base, forming a rigid body that supports repeated opening and closing in everyday use.
The 5-1/16 in center-to-center measurement defines the drilling pattern for this Amerock Calathea series pull, so it pairs with layouts already set for 128 mm hardware. Base dimensions of 1/2 in length by 1-1/16 in width mark out the footprint at each mounting point, which helps when positioning the pull relative to panel edges and rails. That base size also spreads the visual weight at the contact points, so the pull appears anchored rather than pin-like on the surface. The 5-11/16 in overall length lets the pull bridge across stile or rail transitions, offering consistent alignment when used in runs. With a projection of 1-1/16 in, the installed pull keeps enough clearance behind the bar for fingers while staying close to the face for a compact profile on cabinet fronts.
The Amerock Calathea Series 5-1/16 in center to center Black Chrome pull uses a textured surface derived from natural botanical patterns, so it suits cabinet runs where visual interest on the hardware is important. That texture adds depth to otherwise flat front designs, which helps break up large banks of drawers or tall doors. The 5-11/16 in length places this pull in a mid-size range, allowing it to sit comfortably on both standard wall cabinets and base cabinet drawers. A 1-1/16 in width gives the pull a bold face, so it does not disappear on wider fronts. Black Chrome finish pairs with dark doors or two-tone kitchens, because the dark metallic surface reflects light differently than matte finishes. Zinc construction means the pull is formed from a metal base, supporting repeated daily operation on active storage zones such as kitchens, baths, or shop cabinets.
The 5-1/16 in center-to-center dimension directly drives drilling layouts, so using this Amerock BP1003128BCR pull across a project helps keep hole spacing consistent on doors and drawers. That repeatable 128 mm pattern simplifies aligning multiple fronts in rows, because each pull attaches on the same spacing. Base dimensions of 1/2 in length by 1-1/16 in width define how much space each foot occupies, which matters when placing pulls on narrow rails where edge distances are tight. The 1-1/16 in projection supports a comfortable grip depth while controlling how far hardware extends into walk paths, useful on islands or tall pantry runs. A width of 1-1/16 in and 5-11/16 in overall length create a stable grip zone across the front, which helps when pulling deep storage drawers. The Calathea collection identity links this pull to a broader Amerock decorative hardware line, helping keep design language unified when pairing it with other Calathea pieces on the same project.
The Amerock Calathea Series 5-1/16 in (128 mm) center to center Black Chrome pull uses a 5-1/16 in hole spacing, so it matches layouts drilled on a 128 mm pattern.
The BP1003128BCR Calathea pull has a 5-11/16 in overall length, giving a mid-size span that suits both doors and drawers on most cabinet runs.
This Black Chrome Calathea pull has a 1-1/16 in projection and 1-1/16 in width, creating enough clearance for a comfortable grip while keeping a substantial front profile.
The Amerock Calathea BP1003128BCR pull is made from zinc, providing a metal base that supports the Black Chrome finish for decorative cabinet use.
The Calathea collection is inspired by natural botanical patterns, so this pull presents a unique textured surface that adds depth on cabinet and furniture fronts.
This Amerock Calathea pull has base dimensions of 1/2 in length by 1-1/16 in width at each mounting point, defining the footprint on the cabinet surface.
The Amerock Calathea pull 128mm center to center ties together precise drilling, a 5-11/16 in length, and a textured Black Chrome finish, so it suits cabinet work that needs both dependable grip geometry and a distinct visual surface. Zinc construction under the Calathea collection design supports daily operation on doors and drawers across kitchens, baths, or shop storage. For projects calling for a mid-size 5-1/16 in center-to-center pull with botanical-inspired texture, this Amerock BP1003128BCR model from Wurth Baer Supply delivers a defined pattern, consistent dimensions, and a dark metallic appearance for coordinated decorative hardware layouts.