Amerock Calathea 160mm pull is a cabinet handle from Amerock Corporation designed for doors and drawers in decorative hardware projects. The pull belongs to the Calathea collection, so it keeps a consistent look when used across multiple fronts on the same job. The center-to-center measurement is 6-5/16 inches, which sets the drilling distance between mounting holes and coordinates with common medium-length cabinet layouts. Overall length is 7 inches, giving some overhang past the screw points for hand clearance. The pull is part of the Handles and Pulls, Amerock product class, aligning it with other Amerock decorative hardware used in cabinetry work. Wurth Baer Supply offers this Amerock cabinet pull as part of its cabinet hardware assortment for woodworking professionals.
The 6-5/16 inch center-to-center spacing defines the exact distance between screw holes, which guides drilling jigs and templates during cabinet fabrication. With a 7 inch overall length, the pull slightly exceeds the mounting span, which can visually balance on medium-width drawer fronts. The projection of 1-1/16 inches sets how far the pull stands off the face, affecting both hand clearance and how far it extends into walk paths. Width at 1-1/16 inches and base dimensions of 1/2 inch by 1-1/16 inches determine the bearing surface on the wood, which matters when locating the pull on narrow stiles or rail sections.
This Amerock Calathea cabinet pull belongs to the Decorative Hardware & Moldings category under Handles and Pulls, so it suits cabinet and furniture fronts in woodworking environments. The 6-5/16 inch center-to-center layout aligns with a common mid-size handle spacing, allowing it to sit comfortably on standard kitchen cabinet doors and broader drawer faces. A 7 inch total length gives the handle enough span to look proportionate on wider panels without overwhelming smaller doors that still support this drilling pattern. The base size of 1/2 inch by 1-1/16 inches means each end occupies a compact footprint, helping it position cleanly on framed construction, slab-front cabinets, or furniture pieces where stile width is limited.
The fixed 6-5/16 inch center-to-center measurement allows templates and drilling jigs to be set up once, so repeated pulls in a run follow the same layout pattern across the job. A projection of 1-1/16 inches keeps the grip accessible while remaining relatively close to the cabinet surface, which helps maintain a straightforward profile for doors and drawers in narrow aisles. The 1-1/16 inch width and defined base dimensions provide predictable bearing surfaces, supporting repeatable positioning relative to door edges and rail intersections. Being part of the Amerock Handles and Pulls class, the Calathea pull can be paired with other Amerock components that share similar dimensional logic, which simplifies planning when standardizing hardware across multiple rooms or projects.
The Amerock Calathea 160mm pull has a 6-5/16 inch center-to-center dimension, which sets the exact distance between mounting holes for drilling and layout work.
The pull measures 7 inches in overall length, so it spans slightly beyond the mounting points for a balanced appearance on medium-width cabinet fronts.
The Calathea pull projects 1-1/16 inches from the cabinet face, providing working finger clearance while keeping the handle close to the front surface.
The pull has a width of 1-1/16 inches, giving a defined front profile that affects how it looks and feels on doors and drawers.
Each base on the Calathea pull measures 1/2 inch long by 1-1/16 inches wide, describing the contact area used when positioning on cabinet faces.
The Calathea 160mm cabinet pull is manufactured by Amerock Corporation, placing it within the Amerock Handles and Pulls product class for decorative hardware.
The Amerock Calathea Series 6-5/16 inch center-to-center polished chrome pull gives cabinet projects a defined drilling pattern, clear footprint dimensions, and a projection suited to everyday door and drawer use. With known length, width, projection, and base sizing, it supports consistent layout across multiple fronts. Sourcing this BP100316026 pull from Wurth Baer Supply connects it directly to a cabinet hardware offering focused on woodworking applications, streamlining selection for matching decorative hardware.
Sold In: 1 Each