Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Calathea cabinet pull is a zinc handle from the Calathea collection finished in satin nickel, so it delivers a consistent decorative look that matches other satin nickel cabinet hardware on a job. The pull has a 6-5/16 in (160 mm) center-to-center dimension, which sets a predictable drilling pattern that helps align multiple doors and drawers in a run. Overall length is 7 in, so the handle spans slightly beyond the mounting holes and gives a full hand grip across standard cabinet faces. A projection of 1-1/16 in positions the hand away from the cabinet surface, which reduces knuckle contact against doors or drawer fronts. The pull width is 1-1/16 in, giving a stable feel when grabbing the handle on heavier fronts. Base dimensions of 1/2 in length by 1-1/16 in width support the load at each mounting point.
The Calathea pull uses a 6-5/16 in (160 mm) center-to-center hole spacing, so it matches metric drilling setups that follow this common dimension for cabinet handles. This spacing lets installers reuse existing 160 mm layouts during remodel work, keeping drill patterns consistent across doors and drawers. The pull length of 7 in leaves material beyond the mounting points, which helps cover the drilled area cleanly on the finished surface. A projection of 1-1/16 in sets a fixed stand-off that works with most standard cabinet door thicknesses. The 1/2 in by 1-1/16 in base dimensions define the footprint at each contact point, which is useful when planning placement relative to door edges or panel profiles.
The Amerock Calathea cabinet pull belongs to the Calathea collection, so it fits projects that follow that specific decorative line. Its satin nickel finish matches other satin nickel elements, helping keep a uniform appearance across doors and drawers. The 6-5/16 in (160 mm) center-to-center dimension suits cabinet layouts that are already based on this drilling size, such as longer drawers or wider doors that benefit from a 160 mm handle. With a 7 in overall length, the pull scales well on mid-size and larger cabinet fronts, giving enough visual presence without overwhelming standard residential or light commercial cabinetry. The zinc material supports decorative hardware use on typical indoor cabinets where metal pulls are specified.
The 6-5/16 in (160 mm) center-to-center spacing on this Calathea zinc cabinet handle establishes a clear drilling reference that supports repeatable hardware alignment across multiple openings. Using that single dimension across a bank of drawers or a run of doors keeps handle positions visually consistent. The 1-1/16 in projection fixes the distance from the cabinet face, which helps maintain even shadow lines and finger clearance from one front to the next. A width of 1-1/16 in gives users a comfortable gripping surface, which matters on frequently used doors such as kitchens or shop storage. Base dimensions of 1/2 in by 1-1/16 in define the footprint at each mounting point, which aids in positioning the pull relative to stile widths and edge reveals. The satin nickel finish on zinc offers a decorative metal look that coordinates with other satin nickel cabinet hardware from Amerock Corporation.
The Calathea pull has a 6-5/16 in (160 mm) center-to-center dimension, which works well on wider drawers and doors where a longer handle supports full-hand gripping.
The Amerock Calathea cabinet pull has a 1-1/16 in projection, so the handle stands off the cabinet face enough to give finger clearance during everyday use.
The BP1003160G10 Calathea pull has a 7 in overall length, giving some handle extension beyond the mounting holes for appearance and grip.
The Calathea series pull is made from zinc with a satin nickel finish, providing a decorative metal look that coordinates with satin nickel cabinet hardware.
Each base on the Calathea pull measures 1/2 in in length by 1-1/16 in in width, defining the contact area on the cabinet face.
The Calathea cabinet pull has a 1-1/16 in width, which provides a stable gripping surface for regular door and drawer operation.
The Amerock Calathea cabinet pull in satin nickel pairs a 6-5/16 in (160 mm) center-to-center layout with a 7 in overall length, so it suits projects calling for a longer decorative handle. With zinc construction, defined base dimensions, and a 1-1/16 in projection, this pull offers consistent spacing and grip on cabinet doors and drawers. For cabinet work that specifies Calathea collection styling and satin nickel hardware, this model aligns the hole spacing, size, and finish in one part.