
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Calathea 6-5/16 in pull is a zinc cabinet handle in a black chrome finish that provides a defined grip and a modern, dark metallic look for doors and drawers in residential or shop-built cabinetry. The pull has a 6-5/16 in center-to-center dimension, so drill point spacing is fixed for consistent alignment across multiple fronts on a run of cabinets. With a 7 in overall length, this pull spans a wider section of the door or drawer face, which helps visually balance mid-size and larger fronts. The 1-1/16 in projection creates stand-off from the cabinet surface, allowing fingers to wrap behind the pull comfortably while keeping fronts clear. A width of 1-1/16 in gives a fuller contact surface, so hands have a solid area to grab during everyday use.
The 6-5/16 in center-to-center layout on this Amerock Calathea pull provides a repeatable drilling pattern that keeps hardware placement consistent from cabinet to cabinet. With a 7 in overall length, the pull maintains equal reveal beyond each mounting hole, which helps align hardware visually along rows of doors and drawers. The 1/2 in by 1-1/16 in base size at each end defines the contact area against the door or drawer face, helping plan around narrow rails or decorative edge profiles. A 1-1/16 in projection sets the pull out from the surface enough for a comfortable finger clearance while maintaining a tight profile suited to cabinetry where a streamlined look is preferred.
This Calathea pull from Amerock Corporation is part of a handles and pulls class suited to cabinet and furniture fronts where a defined handle is required. The zinc construction gives it mass for everyday operation on kitchen, bath, or built-in cabinetry where doors and drawers see frequent cycles. With a 7 in overall length and 6-5/16 in center-to-center spacing, the pull works well on medium to larger doors and drawers where a longer handle helps span the face. The 1-1/16 in width and matching 1-1/16 in projection provide a symmetrical profile that pairs with face frames or frameless cabinet fronts that use bolder hardware lines. The black chrome finish allows this pull to sit alongside other black chrome decorative hardware elements, supporting a coordinated hardware package across a room.
The precise 6-5/16 in center-to-center mounting of the Amerock BP1003160BCR pull simplifies jig setup, so once a drilling pattern is established, hole placement stays uniform across an entire run of cabinets. The 1/2 in length at each base defines how close the pull can sit to the edge of a rail or stile without overhanging, which is useful when working near narrow framework. A base width of 1-1/16 in matches the pull body width, so the contact footprint fully supports the handle and distributes load during pulling. The 1-1/16 in projection creates enough clearance for different hand sizes while keeping the handle compact against the cabinet face, which is helpful in tighter walkways or galley layouts. The zinc material supports a solid feel when gripped, while the black chrome finish provides a consistent dark sheen that maintains the visual line of the pull along banks of drawers or tall pantry doors.
The Amerock Calathea BP1003160BCR pull has a 6-5/16 in center-to-center dimension, so drilling points are spaced 6-5/16 in apart for each handle installation.
This Calathea pull has a 7 in overall length, providing extra handle span beyond the mounting holes for a larger gripping area on cabinet fronts.
The Amerock Calathea cabinet pull has a 1-1/16 in projection, setting the handle off the door or drawer face for finger clearance.
This pull is made from zinc with a black chrome finish, giving a solid metal handle with a dark metallic appearance for cabinet applications.
Each base on the Amerock Calathea pull measures 1/2 in in length by 1-1/16 in in width, defining the footprint where it contacts the cabinet surface.
This specific Amerock Calathea 6-5/16 in pull is identified by manufacturer part number BP1003160BCR, which ties directly to its size, material, and black chrome finish.
The Amerock Calathea Series 6-5/16 in center-to-center black chrome pull BP1003160BCR combines zinc construction, a 7 in length, and a 1-1/16 in projection to support everyday cabinet operation. The defined 6-5/16 in drilling pattern, 1/2 in by 1-1/16 in base footprint, and black chrome finish help align both layout and appearance across a project. For cabinet work calling for a matching Amerock Calathea cabinet pull in black chrome, this model provides the specific dimensions and finish needed for consistent installation.
Sold In: 1 Each