Amerock Concentric Finger Pull For Cabinet Projects

Amerock Concentric finger pull is a cabinet handle designed around a 1-1/4 in (32 mm) center-to-center mounting pattern, so it lines up with standard drilled holes on many cabinet doors and drawer fronts. The pull is part of the Amerock Concentric Series, tying it visually to other pieces in the same collection for consistent hardware layouts across a job. Made from zinc, the body provides a solid metal feel while keeping weight manageable during installation and use. The golden champagne finish gives a warm metal tone that coordinates with a wide range of modern cabinet finishes, which helps it blend into mixed-kitchen or shop environments. With a length of 1-11/16 in and a width of 1 in, the pull presents a compact footprint on the face of the cabinet, which suits tighter drawer fronts or narrow frames where larger bars would crowd the layout.

Key Concentric Finger Pull Details For Buyers

• The 1-1/4 in (32 mm) center-to-center dimension sets the hole spacing, so it matches common 32 mm system layouts and simplifies layout on cabinet doors and drawers.
• The golden champagne finish provides a specific warm metallic color, helping you visually match this pull to hinges or other hardware finished in similar tones across a project.
• The zinc material creates a metal construction that supports everyday cabinet use while keeping the pull light enough for standard door and drawer fronts.
• The 1-11/16 in overall length keeps the pull compact, which is useful on smaller fronts or where hardware needs to stay clear of adjacent edges and trim.
• The 7/8 in projection sets how far the pull stands off the door or drawer, giving finger space while maintaining a low profile against nearby cabinets.
• The 1 in width and 5/16 in by 1 in base dimensions define the footprint on the surface, which helps when planning clearances and drilling locations on narrow rails or stiles.

Mounting And Fit Details For Amerock BP36811BBZ Pull

This Amerock BP36811BBZ pull uses a 1-1/4 in (32 mm) center-to-center mounting measurement, so hole drilling is straightforward for installers working with standard cabinet layouts. The pull projects 7/8 in from the surface, which sets the working grip depth for fingers while limiting how far it extends into walk paths or tight clearances. With a 1 in width and a 5/16 in length by 1 in width base, the contact area on the cabinet face is clearly defined, aiding accurate alignment during layout. The overall 1-11/16 in length means the pull suits smaller cabinet faces where larger pulls could interfere with neighboring doors or trim.

How This Golden Champagne Finger Pull Performs In Use

Where The Amerock Concentric Finger Pull Works Best

The Amerock Concentric BP36811BBZ pull is designed as a handle and pull within the Amerock Concentric collection, so it fits cabinet and furniture projects that call for a coordinated decorative hardware line. Its 1-1/4 in (32 mm) center-to-center hole spacing aligns with many 32 mm system cabinet layouts, which supports straightforward installation in new work or when following standard drilling jigs. The 1-11/16 in overall length helps this pull sit comfortably on narrow rails or small drawer fronts, making it a fit for compact kitchen, bath, or shop storage fronts where space is constrained. With a 1 in width, the pull presents a defined visual stripe on the door or drawer face, helping installers and designers scale hardware consistently across different cabinet sizes.

Details That Support Repeatable Layouts And Results

The 7/8 in projection of this finger pull gives a predictable stand-off distance from the cabinet surface, which simplifies layout when multiple pulls are aligned in rows on banks of drawers. That consistent projection helps maintain even visual lines and functional clearance for fingers. The base dimensions of 5/16 in length by 1 in width define the bearing area against the cabinet face, giving installers a clear reference for positioning the pull relative to panel edges or profile details. Constructed from zinc, the pull provides a solid metal feel in hand, which is important on doors and drawers that see frequent operation in everyday cabinet use. The golden champagne finish offers a defined color choice within Amerock decorative hardware, helping maintain the same visual tone across matching knobs, pulls, and handles in a room.

Buyer Questions About Amerock Concentric Finger Pull

Select This Finger Pull For 32 Mm Center Projects

The Amerock Concentric Series 1-1/4 in (32 mm) center-to-center BP36811BBZ finger pull combines a zinc construction with a golden champagne finish, so it brings a defined metal look to cabinets and furniture. With its compact 1-11/16 in length, 1 in width, and 7/8 in projection, it suits tighter layouts where precise hardware sizing keeps fronts clean and functional. For projects using Amerock decorative hardware and standard 32 mm hole spacing, this pull provides a matching option for doors and drawers that need a smaller-format handle.