Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Concentric finger pull defines a compact cabinet pull designed for tight, modern layouts where a small footprint matters. The pull comes from Amerock Corporation's Concentric collection, so its form follows a consistent design language across matching hardware. The gunmetal finish establishes a dark, uniform tone on the zinc body, which keeps the appearance steady across multiple doors and drawers in the same run. The 1-1/4 in (32 mm) center-to-center dimension sets the drilling layout, giving a fixed distance between screw holes for repeatable installation. A 1-11/16 in overall length keeps the pull short, which helps when working near adjacent walls or appliance panels. The 7/8 in projection sets how far the pull stands off the surface, providing finger clearance while holding the profile close to the face. A 1 in width offers a stable gripping surface across the front edge.
The 1-1/4 in (32 mm) center-to-center spacing on the Amerock Concentric finger pull controls drill-bit placement, so installers can rely on a single jig or template setting. With a 1-11/16 in overall length, the pull occupies a small span on the face, which helps position it on narrower stiles without crowding edges. The 7/8 in projection defines stand-off from the surface, influencing how far fingers travel before contacting the pull, while the 1 in width stabilizes the pull's footprint. Base dimensions of 5/16 in length by 1 in width indicate the contact area at the mounting point, guiding layout when aligning the pull along rails or edges.
The Amerock Concentric Series 1-1/4 in (32 mm) center-to-center gunmetal pull functions as a compact finger pull for cabinet and furniture faces where a smaller handle is preferred. Its 1-11/16 in length lets the pull sit neatly on narrow drawer fronts or slim upper doors without extending into neighboring reveals. The 7/8 in projection sets the working clearance, so fingers can hook the pull without it protruding far into walking paths or tight galley runs. A 1 in width combined with a 1 in-wide base gives a stable visual line across the edge, which helps align multiple pulls along a bank of fronts for a consistent look. The Concentric collection identity supports projects that use coordinated Amerock hardware across a space.
The 32 mm center-to-center dimension on this Amerock Concentric finger pull matches a common metric drilling pattern, so once the first set of holes is located, the same spacing carries across every front. That repeatable spacing keeps hardware alignment straightforward on larger runs of doors and drawers. The 1-11/16 in overall length limits how much face area the pull covers, which can simplify layout near panel profiles or decorative edges. With a 7/8 in projection, installers know exactly how far the pull stands off the surface, which helps coordinate with other hardware depths in the same room. The 1 in width and 5/16 in by 1 in base dimensions define the footprint against the surface, aiding consistent vertical and horizontal positioning along rails and stiles.
The Amerock Concentric finger pull uses a 1-1/4 in (32 mm) center-to-center spacing, so the two mounting holes align on that fixed distance for each cabinet or drawer front.
The BP36811GM finger pull has a 1-11/16 in overall length, 1 in width, and a 7/8 in projection, defining a compact footprint and controlled stand-off from the mounting surface.
The pull is made from zinc with a gunmetal finish, providing a solid metal body and a dark, consistent color across all installed pulls.
The base measures 5/16 in in length by 1 in in width, so installers can use that footprint to align the pull along rails, stiles, or front edges.
The BP36811GM designation identifies this specific Amerock Concentric Series finger pull in gunmetal, allowing clear reference when matching or reordering hardware.
The 7/8 in projection sets how far the pull stands away from the surface, giving fingers room to grip while keeping the handle close to the cabinet face.
The Amerock Concentric finger pull BP36811GM pairs a 1-1/4 in (32 mm) center-to-center layout with a compact 1-11/16 in length, giving predictable drilling and a small footprint on cabinet fronts. Its zinc construction and gunmetal finish deliver a coordinated metal look that stays consistent across multiple pulls. With defined dimensions for projection, width, and base size, this pull offers installers clear reference points for aligning hardware on doors and drawers. For projects calling for a compact gunmetal finger pull with a fixed 32 mm drilling pattern, this Amerock Concentric model provides a precise, repeatable option.