Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Concentric 96mm pull gives you a defined 3-3/4 in center-to-center handle for cabinet doors or drawers, so layout between holes stays consistent on every front. The pull is part of the Concentric Collection, tying this piece to a coordinated Amerock design family for projects where matching hardware matters across a room or bank of cabinets.
The pull material is zinc, which provides a solid-feeling grip while keeping weight manageable on typical cabinet doors and drawer fronts, supporting smooth operation without stressing the hinge or slide hardware. The Golden Champagne finish delivers a specific warm metallic tone, so you can align this pull visually with other Golden Champagne components in the same space.
The overall length of 4-3/16 in sets how far the pull spans visually on the cabinet face, while the 1 in width defines the hand contact area, giving fingers a clear edge to grab. A projection of 7/8 in establishes how far the pull stands off the surface, leaving working room for fingers behind the pull during everyday use without the pull dominating shallower cabinet faces.
The defined 3-3/4 in center-to-center mounting dimension on the Amerock Concentric 96mm pull allows installers to use standard 96 mm drilling jigs, speeding layout on repeat cabinet runs and helping match existing European drilling patterns. The 4-3/16 in overall length leaves a modest margin beyond the hole centers at each end, which can be useful when aligning the pull between stiles or within narrow drawer fronts because the pull will not overrun smaller face widths.
The 7/8 in projection keeps the hardware profile relatively low while still letting fingers wrap behind the bar, which supports comfortable opening on wall cabinets and base cabinets without extending far into the room. Base dimensions of 5/16 in by 1 in concentrate the contact area at each mounting point, helping the pull sit fully on flat portions of the door or drawer profile and creating a clear reference for aligning pairs of pulls visually across a run.
The Amerock Concentric Series 3-3/4 in (96 mm) center-to-center Golden Champagne pull is suited to cabinet installations where 96 mm hardware has been specified or where you want a defined metric and imperial spacing. The 3-3/4 in center-to-center dimension works well on typical kitchen and bath cabinet doors and on many drawer fronts, giving enough span for a comfortable grip without overwhelming narrower fronts, so a single pull can serve across uppers, bases, and vanities.
The Golden Champagne finish helps this pull sit visually between traditional brass tones and cooler modern finishes, which gives designers and installers a specific finish option when tying together appliances, faucets, and lighting that share similar tones. Because the length is 4-3/16 in, there is a modest overhang beyond the mounting centers that creates a balanced look on common stile widths, supporting clean visual lines when multiple doors are ganged together.
The 1 in width provides a defined gripping surface, useful on heavier pantry or storage doors where fingers benefit from a more substantial edge while still remaining proportional to smaller fronts. A projection of 7/8 in allows hands to approach from above, below, or straight on without the pull feeling too proud of the face, helping in tight galley kitchens or utility spaces where hardware depth competes with movement.
The fixed 3-3/4 in (96 mm) center-to-center spacing on this Amerock BP36812BBZ pull simplifies repetitive drilling because installers can rely on a single jig setting across the job, reducing layout variation from cabinet to cabinet. When replacing existing 96 mm center-to-center pulls, this dimension lets the new pull sit on the same holes, maintaining alignment with existing drilling patterns and reducing surface disruption on finished cabinet faces.
The defined base size of 5/16 in by 1 in offers a precise rectangle at each contact point, which helps line up the pull parallel to door edges or drawer tops, producing a consistent reveal from one cabinet to the next. With an overall length of 4-3/16 in, the pull leaves visible cabinet surface at each end when centered within typical frame rails, preserving the door profile while still giving a clear handle location that is easy for users to find by touch.
The zinc material provides a solid body for threaded attachment at each mounting point, supporting a secure connection between the pull and the cabinet front when fastened using the specified screw interface. The Golden Champagne finish, applied to this zinc body, maintains a unified color across the face and ends of the pull, which supports consistent sight lines when multiple pulls are installed in rows on banks of drawers or tall cabinet runs.
The Amerock Concentric 96mm pull has a 3-3/4 in (96 mm) center-to-center dimension, which sets the drilling pattern and aligns with standard 96 mm cabinet hardware layouts.
The Amerock BP36812BBZ pull has an overall length of 4-3/16 in, giving a compact visual span that suits typical cabinet doors and many drawer front widths.
This Golden Champagne cabinet pull has a projection of 7/8 in and a width of 1 in, which defines the hand clearance and gripping surface on the cabinet face.
The Concentric Series cabinet pull is made from zinc, providing a solid pull body suitable for typical cabinet door and drawer applications.
This Amerock decorative cabinet pull has a Golden Champagne finish, giving it a defined warm metallic tone that coordinates with other Golden Champagne hardware.
The Amerock Concentric 96mm pull has base dimensions of 5/16 in by 1 in at each mounting point, which defines the contact pad on the cabinet surface.
The Amerock Concentric Series 3-3/4 in (96 mm) center-to-center Golden Champagne pull, part number BP36812BBZ, combines a defined 96 mm drilling pattern with a compact 4-3/16 in length, 1 in width, and 7/8 in projection. For projects built around Golden Champagne hardware and 96 mm layouts, this zinc pull provides the dimensions and finish needed to keep door and drawer fronts consistent across the run.