Amerock Concentric cabinet pull 96mm is a zinc handle in the Concentric collection with a matte black finish, so it gives cabinets and drawers a consistent modern look that matches other matte black fittings on the job. The center-to-center dimension of 3-3/4 in (96 mm) means it lines up with standard 96 mm drilled hole patterns, which helps when swapping out existing pulls without changing boring layouts. The overall length of 4-3/16 in provides finger room beyond the screw centers, which helps on thicker drawer fronts. A projection of 7/8 in sets the grip away from the door surface, giving hand clearance while keeping the profile tight to the face. A width of 1 in spreads the visual weight, which can balance wider drawer fronts in kitchens, baths, or shop cabinets.
This Amerock 3-3/4 inch cabinet pull uses a 3-3/4 in (96 mm) center-to-center measurement, so the screw holes land on a standard metric cabinet boring pattern familiar to installers. The hardware uses 8-32 x 1 in screw sizing, so it threads into typical cabinet pull inserts and handles standard door and drawer front thicknesses found in many installations. A projection of 7/8 in sets the pull off the face enough for comfortable gripping, so hands clear the door edge while still keeping the handle close to the surface. The 5/16 in length by 1 in width base dimensions establish a stable mounting footprint on each end, so the pull seats flat against the surface when tightened down. Together these details support clean, repeatable mounting on face-frame or frameless cabinet layouts that follow the 96 mm spacing.
The BP36812MB Amerock Concentric pull fits cabinet and drawer fronts laid out on a 3-3/4 in (96 mm) center-to-center pattern, so it suits kitchens, bathrooms, and built-ins already drilled on that spacing. Its matte black finish works with dark or contrasting light door colors, so it can support both monochrome and mixed-finish cabinet designs. The 4-3/16 in overall length and 1 in width give enough presence for use on standard base cabinets and medium drawers, so runs of hardware on uppers and lowers maintain a consistent scale. A projection of 7/8 in provides clearance for fingers around typical door edge profiles, so it functions well on flush fronts or simple profiled rails in most cabinet shops. Zinc construction means the pull is made from metal rather than a composite, so it stands up to regular opening and closing in busy household zones or workrooms.
The 3-3/4 in (96 mm) center-to-center dimension on this matte black cabinet hardware supports repeatable layouts, so jigs or boring machines set for 96 mm can be used across multiple doors without adjustment. Using 8-32 x 1 in screw size keeps hardware consistent with common cabinet standards, so installers can rely on familiar fastener threading during large runs. The 5/16 in by 1 in base dimensions help each foot sit squarely on the surface, so when the pull is tightened it nests against the door face with a defined contact area. A 7/8 in projection means the pull does not stand excessively far off the cabinet, so it reduces snag potential while still giving room for a firm grip. Being part of the Concentric collection ties this piece to a broader Amerock hardware line, so designers and builders can repeat the same visual language on different cabinet zones while holding the same mounting details.
The Amerock Concentric cabinet pull 96mm has a 3-3/4 in (96 mm) center-to-center dimension, which matches standard 96 mm boring patterns for straightforward cabinet and drawer installations.
The BP36812MB Amerock Concentric pull is made from zinc, giving it a solid metal construction suited to frequent cabinet and drawer use in kitchens or work areas.
This matte black cabinet pull has a 7/8 in projection, setting the grip off the cabinet face enough for comfortable hand clearance while keeping a compact profile.
This Amerock matte black zinc pull uses 8-32 x 1 in screws, matching common cabinet hardware threading for typical door and drawer front thicknesses.
The Amerock Concentric pull measures 4-3/16 in in overall length, 1 in in width, and has base dimensions of 5/16 in length by 1 in width at each mounting foot.
The Amerock Concentric Series BP36812MB uses a matte black finish, giving a low-sheen appearance that coordinates with other matte black cabinet components.
This Amerock Concentric Series 3-3/4 in (96 mm) matte black pull pairs a standard 96 mm center-to-center layout with zinc construction, so it fits common cabinet drilling while delivering a solid metal feel. With 7/8 in projection, 1 in width, and defined base dimensions, it supports comfortable gripping and stable mounting on doors and drawers. For projects using matte black decorative hardware with 96 mm spacing, this BP36812MB pull is a practical match for coordinated cabinet runs.