Amerock Concentric 96mm Gunmetal Pull For Cabinets

Amerock Concentric 96mm gunmetal pull is a zinc cabinet pull from Amerock Corporation designed around a 3-3/4 in (96 mm) center-to-center mounting layout, so it matches common drilled hole patterns on many cabinet and drawer fronts. The pull measures 4-3/16 in in overall length, giving a little overhang beyond the hole spread for a balanced look around the fastener locations. A 7/8 in projection sets the hand grip off the cabinet face enough for fingers to wrap around without crowding the door or drawer front. The 1 in width across the pull presents a stable gripping surface, which helps when opening heavier drawers or wider doors. Base dimensions of 5/16 in by 1 in define a compact footprint at each mounting point that sits neatly on typical cabinet rail and stile widths.

Key Concentric Pull Details That Aid Cabinet Work

• The Concentric collection identity ties this pull to Amerock's Concentric series, which matters when matching existing hardware across a room or when coordinating multiple cabinets in the same project.
• The gunmetal finish provides the final color and surface character, which lets this pull align with darker hinges or fixtures and support consistent visual themes across doors and drawer fronts.
• The zinc material construction creates a solid metal body for the pull, which suits everyday cabinet and drawer cycles where a metal grip is preferred over non-metal options.
• The 3-3/4 in (96 mm) center-to-center dimension establishes the drilling layout, so installers can use standard jigs or templates set for this common spacing when boring new cabinet fronts.
• The 4-3/16 in overall length gives a clear reference from end to end, which helps with layout when aligning multiple pulls in a row or centering the hardware on varying drawer widths.
• The 7/8 in projection describes how far the pull stands off the door or drawer face, which influences clearance for fingers behind the pull and helps avoid contact with adjacent fronts.
• The 1 in width defines the front-to-back face of the pull bar, which offers a predictable grip surface that feels stable during repeated opening and closing in kitchen, bath, or shop cabinetry.

Mounting Dimensions And Fit For Amerock Concentric Pull

This Amerock Concentric Series pull uses a 3-3/4 in (96 mm) center-to-center measurement between mounting points, so hole drilling and template settings can follow that fixed spacing. Base dimensions of 5/16 in length by 1 in width at each mounting pad describe the contact area against the cabinet face, which is useful when evaluating how the pull will sit on narrow rails or wider stile sections. The 7/8 in projection from the mounting surface to the front of the pull determines how far the hand grip stands off the door or drawer, which helps plan around nearby doors, appliance panels, or interior clearances. A 4-3/16 in overall length and 1 in width complete the envelope of the pull, giving a precise outline for layout on both framed and frameless cabinet fronts.

Using The BP36812GM Pull In Cabinet Projects

Where This Amerock Concentric Cabinet Pull Fits Best

The Amerock Concentric Series 3-3/4 in (96 mm) center-to-center gunmetal pull, part number BP36812GM, belongs to Amerock's Concentric collection in the Handles and Pulls product class. That collection identification supports projects where matching style across multiple doors and drawers is important. The decorative hardware and moldings category position this pull for use on cabinet and furniture fronts rather than structural applications, so it suits kitchens, baths, built-ins, and shop storage. Its gunmetal finish pairs with cabinetry where a darker tone is desired, and the 1 in width across the grip offers a comfortable surface that works on both small doors and wider drawers. The pull's 4-3/16 in overall length helps it scale well on standard cabinet fronts without overwhelming narrower faces.

Why Dimensions And Material Support Repeatable Results

The 3-3/4 in (96 mm) center-to-center spacing on this zinc pull lines up with one of the most common drilling patterns, which streamlines layout when repeating the same pull across a full run of cabinets. Using a constant 96 mm spacing allows installers to keep jigs, templates, or CNC programs unchanged from door to door, reducing layout variation. The zinc material provides a uniform metal body, which helps the pull respond consistently when fasteners are tightened across different cabinet materials. A 7/8 in projection creates predictable clearance behind the pull, supporting smooth operation for hands in everyday use and helping reduce contact with the cabinet finish. The compact 5/16 in by 1 in base dimensions localize the mounting footprint, which is useful when aligning pulls on narrow rails or shaker-style frames while keeping each base fully supported.

Common Questions About Amerock Concentric 96mm Gunmetal Pull

Select This Pull For 96mm Cabinet Layouts

The Amerock Concentric Series 3-3/4 in (96 mm) center-to-center gunmetal pull, BP36812GM, combines a 96 mm drilling pattern with a 4-3/16 in overall length for straightforward cabinet layouts. Its zinc construction and gunmetal finish align with decorative hardware needs in kitchens, baths, offices, or shop storage. With a 7/8 in projection, 1 in width, and compact 5/16 in by 1 in base dimensions, this pull offers predictable fit and grip on typical cabinet doors and drawers. For projects built around a 96 mm center-to-center pattern from the Concentric collection, this pull provides a consistent option.