Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Concentric pull 96mm gives cabinets a defined grip point with a 3-3/4 in (96 mm) center-to-center layout, so drilling patterns line up between doors and drawers on a run. The zinc construction creates a solid-feeling pull that handles everyday cabinet use in kitchens, baths, or shop storage. A polished nickel finish reflects surrounding surfaces, which helps the handle visually coordinate with other polished nickel decorative hardware in the same space. The 4-3/16 in overall length provides enough bar to grasp with a full hand while still fitting on narrower drawer fronts. A 7/8 in projection from the cabinet face sets the hand away from the door or drawer surface, helping prevent knuckle contact with the wood. The 1 in width offers a stable grip and clear visual line across the face of the cabinet for consistent alignment.
The 3-3/4 in (96 mm) center-to-center mounting dimension on this Amerock Concentric Series pull matches a common cabinet boring pattern, so existing 96 mm holes on retrofit jobs stay usable. With a 4-3/16 in overall length, the pull fits comfortably on standard-width cabinet rails and drawer fronts without crowding panel edges. The 7/8 in projection keeps the gripping surface away from raised profiles, giving clearance where doors have detailing. At 1 in wide, the pull spans enough surface to look proportionate on both single cabinet doors and smaller drawers, which helps maintain a balanced appearance. Base dimensions of 5/16 in length by 1 in width define the footprint at each mounting point, which matters when aligning the pull over finished or pre-drilled mounting zones.
This Amerock Concentric Series 3-3/4 in (96 mm) center-to-center polished nickel pull fits well wherever a standard 96 mm hole pattern is used, because the measurement directly matches that layout. The 4-3/16 in overall length suits typical face-frame and frameless cabinet doors, so runs of doors in kitchens and baths maintain a consistent visual line. A 7/8 in projection pairs effectively with thicker door and drawer fronts, since the stand-off distance provides working space for fingers behind the pull. With a 1 in width, the pull looks appropriately scaled on narrow drawer fronts and small upper doors while still reading as substantial on base cabinets. The zinc material gives the pull a solid profile, which aligns with cabinets that need hardware capable of repeated gripping on storage doors and drawers.
The precise 3-3/4 in (96 mm) center-to-center spacing supports repeatable boring across multiple fronts, so template-based drilling produces aligned pulls on long cabinet runs. The 4-3/16 in length creates a consistent reveal beyond the mounting holes, which helps installers visually center the pull on rails and stiles. A 7/8 in projection controls how far the gripping surface stands off the face, maintaining the same hand clearance from cabinet to cabinet and reducing variation in user feel. The 1 in width keeps the grip area stable along its length, which supports consistent hand placement when doors and drawers are opened from different angles. Base dimensions of 5/16 in length by 1 in width define a repeatable contact area at each mounting point, which aids in aligning multiple pulls precisely along cabinet faces.
The Amerock Concentric pull has a 3-3/4 in (96 mm) center-to-center measurement, which matches a common cabinet drilling pattern for consistent handle placement.
The pull length is 4-3/16 in, giving extra bar beyond the mounting holes so users have room to grip while keeping the pull proportionate on standard cabinet fronts.
The pull projects 7/8 in from the cabinet face, creating finger clearance behind the handle and helping limit contact with finished door or drawer surfaces.
The Amerock Concentric pull is made from zinc, providing a solid-feeling handle suited to frequent use on doors and drawers in active spaces.
The pull has a 1 in width and base dimensions of 5/16 in length by 1 in width, which define the visible footprint and help with clean alignment on the cabinet face.
The Amerock BP36812PN pull has a polished nickel finish, allowing it to visually coordinate with other polished nickel decorative hardware in the same project.
The Amerock Concentric Series 3-3/4 in (96 mm) center-to-center polished nickel pull combines a standard 96 mm drilling pattern with a 4-3/16 in length, 7/8 in projection, and 1 in width, so layout and hand clearance stay predictable. The zinc construction and polished nickel finish tie appearance and feel together for cabinets that rely on dependable hardware in regular use. For projects calling for this specific 96 mm spacing and polished nickel look, this Amerock BP36812PN pull from Wurth Baer Supply aligns dimensions, finish, and material into a straightforward hardware choice.